Question about 1999 kawasaki ZRX 1100

1 Answer

Do i need a large allen key to remove the front wheel?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 642 Answers

Yes, you'll need a 6mm for the calipers and a 14mm for the axle. Cut a piece off 30mm piece off the long end of the allen key. You can then use it with a 14mm socket to torque the axle.(80 ft/lb)

Posted on Sep 11, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Front wheel removal

you need one of these Suzuki GSX1400 Year 01 07 Front Wheel Axle Nut Removal Tool MPTLSAX

or you can weld two 24mm nuts together, or even use a 24mm allen key..

Mar 07, 2014 | 2005 Suzuki GSX 1400

1 Answer

Change front fork oil seals

you need to remove the front wheel then on the bottom of each fork there will be an allen bolt recessed in. slacken this then undo the large bolts at top of forks. remove the brake caliper from fork leg and tie it up, dont just suspend it by the brake line. undo the pinch bolts on the yokes and withdraw each fork leg. continue to remove the allen bolt you slackened, drain the oil out of the legs and then pull the stanchion out of the fork bottom. the seals can now be prised out from the fork bottoms and new seals pushed in. assembly is a reverse of removal

Oct 25, 2013 | 2011 Hero Honda Splendor Plus

1 Answer

How to remove front sliders on a1994 harley davdison custom softail

You have to remove the front wheel, front brakes, front fender, and loosen the clamp bolt on the lower triple tree. Take the large nut off the top of the fork tube and slide the entire assembly out. Turn it upside down and let the oil drain out and take the spring out. Look on the bottom of the slider where the axle goes and you'll see a socket head bolt. It takes an 8mm allen wrench. I usually use a special allen wrench socket and an air wrench to get the bolt out. It is designed to use a "piloted hex key" but you can get it out if you use a NEW allen wrench. It is very shallow and will round out if you're not careful. Once the bolt is out, the slider comes right off the fork tube.

Good Luck

May 09, 2011 | Harley Davidson Boulevard C109RT...

1 Answer

Can not remove the front wheel on my 1994 ducati 900 ss

remove the calipers
loosen the pinch bolt on RHS
use large allen key to unscrew axle

Jan 07, 2011 | Ducati 900 SS Motorcycles

1 Answer

How hard is it to replace a rear strut

it is fairly easy
1. jack up remove wheel, block car on frame!!! not on the strut
2. remove two big bolts on bottom of strut then have to drive them out of hub housing (splined about 1 inch on head side of bolt.
3. remove the sway bar connector rod (allen key and wrench. or if allen is stripped u can use wrench just in front of boot, so one inside and undo the one nut you can see facing you)
4. open trunk pull carpet back on top of wheel well so you can see 3 nuts in a triangle with one in the center DO NOT REMOVE CENTER NUT this is what holds spring to strut assembly..put a jack under strut to hold it in place .remove the 3 nuts.
5. pry the bottom of strut out of hub
6. drop out strut and spring assembly.
7. use 2 spring depressors to squeeze the spring so u may remove large center nut, use wrench and allen key.
8. replace as a whole unit or just the strut. the whole unit is more expensive and if so delete step 7
9. reverse the steps to install.
10. make sure all bolts are tight and check with torque wrench for proper tightness.
11. MAKE SURE LOL you dont want to go for a drive with any of these parts loose. If u r not experienced take it to a shop.

Dec 05, 2010 | 1998 Pontiac Grand Prix

2 Answers

How to remove the front wheel on the 90 model zxr 750.

To do this safely and securely you will need to obtain a front paddock stand which supports your front wheel, you will then need a "24mm hex drive socket" to loosen the wheel, pull the spindle out and wheel shoul slide out easily.

Oct 07, 2010 | 1990 kawasaki ZXR 750

1 Answer

What size allen key do ineed to remove the front wheel on my kawasaki gpz1100 ?

Do you have a set of Allen keys, then try the 2nd or 3rd largest. Donot forget to losen the fork bottom cap holding the front axle.

Mar 27, 2010 | 1995 kawasaki GPZ 1100

1 Answer

How to get disc brake assemly off?

Front or rear?
For front: Remove wheel/tire
Remove brake caliper - two bolts usually with internal hex heads (think big Allen wrench)
Lift caliper (which holds pads) out of the way and support it so it doesn't "hang" by the brake hose (you may have to tap it with a hammer)
Once the caliper is out of the way, the disc (also called a "rotor") should slide off the hub. Unless it's rear wheel drive. In that case, you'll need to remove the small center hubcab, remove the cotter pin from its hole in the spindle, then remove the large packing nut. The outer bearing can then be removed and the rotor can then be removed.

Apr 14, 2009 | Buick Regal Cars & Trucks

1 Answer

Passat 2001 cv joint

remove wheel,slacken centre bolt (14mm)allen key ,take bottom arms off the ball joints remove allen key bolt and push shaft out,you might get it past the brake caliper if not remove the caliper and the rest from there is straight forward

Dec 29, 2008 | 2001 Volkswagen Passat

Not finding what you are looking for?
1999 kawasaki ZRX 1100 Logo

Related Topics:

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers


Level 3 Expert

76649 Answers


Level 2 Expert

342 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides