Question about 2002 Harley Davidson FLHRCI Road King Classic

1 Answer

Turn on ignition lights flash no start - 2002 Harley Davidson FLHRCI Road King Classic

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The security alarm on this bike is tripping, if you do not know the code or how to set a new one your local dealer can do it in minutes

Posted on Sep 08, 2010

Testimonial: "if wanted harley to fix it i would not be on the net"

  • 20 more comments 
  • trixie19 Sep 08, 2010

    Don't Mean to sound like an *** but the dealer will charge 4 hours at 80 bucks a clip even if it takes 10 minuts love the bikes hate the greedy company

  • trixie19 Sep 08, 2010

    Don't Mean to sound like an *** but the dealer will charge 4 hours at 80 bucks a clip even if it takes 10 minuts love the bikes hate the greedy company

  • trixie19 Sep 08, 2010

    Don't Mean to sound like an *** but the dealer will charge 4 hours at 80 bucks a clip even if it takes 10 minuts love the bikes hate the greedy company

  • trixie19 Sep 08, 2010

    Don't Mean to sound like an ahole but the dealer will charge 4 hours at 80 bucks a clip even if it takes 10 minuts love the bikes hate the greedy company

  • trixie19 Sep 08, 2010

    Don't Mean to sound like an ahole but the dealer will charge 4 hours at 80 bucks a clip even if it takes 10 minuts love the bikes hate the greedy company

  • trixie19 Sep 08, 2010

    Don't Mean to sound like an ahole but the dealer will charge 4 hours at 80 bucks a clip even if it takes 10 minuts love the bikes hate the greedy company

  • trixie19 Sep 08, 2010

    Don't Mean to sound like an ahole but the dealer will charge 4 hours at 80 bucks a clip even if it takes 10 minuts love the bikes hate the greedy company

  • trixie19 Sep 08, 2010

    Don't Mean to sound like an ahole but the dealer will charge 4 hours at 80 bucks a clip even if it takes 10 minuts love the bikes hate the greedy company

  • trixie19 Sep 08, 2010

    Don't Mean to sound like an ahole but the dealer will charge 4 hours at 80 bucks a clip even if it takes 10 minuts love the bikes hate the greedy company

  • trixie19 Sep 08, 2010

    Don't Mean to sound like an ahole but the dealer will charge 4 hours at 80 bucks a clip even if it takes 10 minuts love the bikes hate the greedy company

  • trixie19 Sep 08, 2010

    Don't Mean to sound like an ahole but the dealer will charge 4 hours at 80 bucks a clip even if it takes 10 minuts love the bikes hate the greedy company

  • trixie19 Sep 08, 2010

    Don't Mean to sound like an ahole but the dealer will charge 4 hours at 80 bucks a clip even if it takes 10 minuts love the bikes hate the greedy company

  • trixie19 Sep 08, 2010

    Don't Mean to sound like an ahole but the dealer will charge 4 hours at 80 bucks a clip even if it takes 10 minuts love the bikes hate the greedy company

  • trixie19 Sep 08, 2010

    Don't Mean to sound like an ahole but the dealer will charge 4 hours at 80 bucks a clip even if it takes 10 minuts love the bikes hate the greedy company

  • trixie19 Sep 08, 2010

    Don't Mean to sound like an ahole but the dealer will charge 4 hours at 80 bucks a clip even if it takes 10 minuts love the bikes hate the greedy company

  • trixie19 Sep 08, 2010

    Don't Mean to sound like an ahole but the dealer will charge 4 hours at 80 bucks a clip even if it takes 10 minuts love the bikes hate the greedy company

  • trixie19 Sep 08, 2010

    Don't Mean to sound like an ahole but the dealer will charge 4 hours at 80 bucks a clip even if it takes 10 minuts love the bikes hate the greedy company

  • trixie19 Sep 08, 2010

    Don't Mean to sound like an ahole but the dealer will charge 4 hours at 80 bucks a clip even if it takes 10 minuts love the bikes hate the greedy company

  • trixie19 Sep 08, 2010

    Don't Mean to sound like an ahole but the dealer will charge 4 hours at 80 bucks a clip even if it takes 10 minuts love the bikes hate the greedy company

  • trixie19 Sep 08, 2010

    Don't Mean to sound like an ahole but the dealer will charge 4 hours at 80 bucks a clip even if it takes 10 minuts love the bikes hate the greedy company

  • trixie19 Sep 08, 2010

    Don't Mean to sound like an ahole but the dealer will charge 4 hours at 80 bucks a clip even if it takes 10 minuts love the bikes hate the greedy company

  • trixie19 Sep 08, 2010

    Don't Mean to sound like an ahole but the dealer will charge 4 hours at 80 bucks a clip even if it takes 10 minuts love the bikes hate the greedy company

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will not start but turns over


Check if security light is on, if so, must reset. To reset, put key in ignition and turn to on position. Security light will start flashing on and off. Leave key in on position until security light stops flashing and turns off completely. This will take approximately 10 minutes. Then turn key off and take out of ignition. Put key back in and start car. Should now start

Jun 29, 2014 | 2000 Saturn SL

Tip

How to reset AIRBAG SRS Light on 2003 - 2006 Infiniti G35 Coupe


Hi, on most vehicles, the airbag light should come on for at 6 seconds, and then go off if the system is working properly. If there is a fault or a problem in the system, the light will remain illuminated, or flash continuously. If the airbag light does not work properly, some vehicles have an audible tone that sounds indicating a problem with the airbag light system. When the light is on (or the tone is sounding), the airbag will NOT deploy, even in an accident. <br /> The flashing light on your car is telling there is a problem. <br /> <br /> <b>How to reset AIRBAG SRS Light on 2003 - 2006 Infiniti G35 Coupe </b> <br /> Ignition Key Method: <br /> <ul> <li>Turn IGNITION on (but don't start car).</li> <li>After the AIR BAG warning lamp lights for 7 seconds, turn IGNITION off within 1 second.</li> <li>Wait 4 seconds.</li> <li>Turn IGNITION on (but don't start car).</li> <li>After the AIR BAG warning lamp lights for 7 seconds, turn IGNITION off within 1 second.</li> <li>Wait 4 seconds.</li> <li>Turn IGNITION on (but don't start car).</li> <li>After the AIR BAG warning lamp lights for 7 seconds, turn IGNITION off within 1 second.</li> <li>Wait 4 seconds.</li> <li>Turn IGNITION on (but don't start car).</li> <li>Wait 3 seconds.</li> <li>Turn IGNITION off.</li> <li>Wait 2 seconds.</li> <li>START Car (the light may be blinking slower than before).</li> <li>Wait 3 seconds.</li> <li>Turn IGNITION off.</li> <li>Wait 3 seconds.</li> <li>START Car.</li></ul> <br /> <b>This is a little easier</b> To reset the light simply turn the iginition to the on position, (you dont need to start it). All the lights should stay on for thier diagnostic check. As soon as the airbag light goes off, before it starts flashing, immeditatly turn the car off. Repeat this 3 or 4 times (turning to on then off) and the light should go away

on Dec 07, 2010 | Infiniti G35 Cars & Trucks

1 Answer

Installed a new ignition cylinder, now the car security light is on and car will not stay started


u will need about 1/2 to do the flash ----insert key and turn to the on position [do not start] and leave in this position for ten minutes --the security light will flash and go on and off during this ignition flash ---then turn off for 10 seconds ====repeat this step 2 more times than turn key to on for a second than start vehicle ur key and ignition relearn should be complete

Apr 09, 2014 | 2000 Saturn SL

1 Answer

97 cavalier cranks will not start theft light stays on


Is the security light flashing? If so, turn ignition on and wait for 10 minutes and light should stay on solid. Then try and start the car without turning the ignition back off. Then turn off ignition and wait 1 minute. Then turn ignition on and see if security light is flashing. If not try and start your car. If it is flashing, try waiting again with just the ignition on and see if it goes out.

Nov 24, 2012 | Cars & Trucks

1 Answer

Why does the red light om my 2002 crown vic flash fast when I attemp to start it


Which red light? The one on top of the dash? If so, there are two cases where that light will flash rapidly: If you use the wrong programmed key, it will immediately start flashing rapidly when you turn on the ignition and try to start the car. If the light is steady and then starts flashing rapidly after a few seconds when you turn on the ignition or try to start the car, you are using the correct programmed key but the engine computer has a problem or has failed.

May 31, 2012 | 2002 Ford Crown Victoria

1 Answer

Intermittent problem, when security light flashes my pickup will turn over but will not fire


This is a GM problem if the security light flashes leave the ignition turned to the on position WAIT for the light to stop flashing. Turn ignition off and try to start If this does not work do the same thing again Your having a problem with the ignition ..it may need to be replaced

Nov 29, 2010 | 2003 Chevrolet Silverado 1500

1 Answer

Installed the prestige remote start(aps687n) on my 95 jeep grand cherokee but when i try to remote start my parking lights just flash 7 times and nothing happens. Any ideas???


Yes, the seven flashes mean that the tachometer setting has not been programmed. If you hooked up a tach wire (green with orange stripe) to an uncommon coil or injector wire, then you have to program tach: turn ignition on, press and release programming switch three (3) times. The parking lights will flash once to confirm. Turn ignition off. Press and hold programming switch. While holding the programming switch, start the vehicle. The parking lights will flash to confirm that the remote starter is getting a tach signal from the vehicle. Continue to hold the switch for approximately 15 seconds.The parking lights will continue to flash while holding the switch. Release the programming switch. The parking lights will come on solid for one second, then go off. The tach is not programmed. Turn ignition off. Test system.

Sep 19, 2010 | Prestige Remote Start

2 Answers

1996 Oldsmobile Achieva: Security light flashes upon startup


Here is what you do, but only when the SECURITY light flashes - if it is always ON or OFF it's no use.
Turn the key in the ignition to ON.
Wait for exactly 10 minutes ( SECURITY light will flash for 10 minutes and then stay on SOLID)
Turn the key to OFF
Wait 5 seconds.
Turn the key in the ignition to ON.
Wait for exactly 10 minutes.
Turn the key to OFF
Wait 5 seconds.
Turn the key in the ignition to ON.
Wait for exactly 10 minutes.
Turn the ignition OFF.

Start the car normally.
It has relearnt the keycode and you're good to go.
NOTICE - it takes 30 minutes to relearn, that's THREE cycles of ON - 10 minutes - OFF.

Good luck.

Jul 11, 2009 | 1996 Oldsmobile Achieva

1 Answer

99 GMC Sierra Pickup: Crank but no start. starts with starting fluid but dies. changed out the fuel filter. still not start. Do I have a bad Fuel Pump? Security light flashes then goes solid after 10 min....


The theft light issue is a good observation. Have you replaced the key tumbler or an ignition component lately? Has there been a lightning storm close very recently?

What the flashing security light is indicating is an attempt to relearn the key you are using.
Turn the key to run position, allow light to flash for 10 minutes, when light stops flashing turn ignition to OFF position for 5 seconds, turn ignition to run position and start over. Do this for 3 consecutive cycles, the the theft system will relearn the key cylinder code and store it once again.
Try that first before you go any further.
Let me know what you find.
Regards,

Apr 30, 2009 | 2000 GMC Savana

1 Answer

Security light flashing and ignition doesnt work


your ignition switch is bad for now though turn your key on for at least ten minutes until the light stops flashing this will reset your security system after stops flashing turn key off and then start the truck

Mar 17, 2009 | 1999 Chevrolet S-10 Pickup

Not finding what you are looking for?
2002 Harley Davidson FLHRCI Road King Classic Logo

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

Mike

Level 3 Expert

4339 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...