Question about Aprilia RS 125 Motorcycles

1 Answer

My son has a sr 50 04 plate he has no power when going up hills. we were told to change the belt and rollers which we did. never solved the problem now we have been told to change the piston and rings will this solve the problem?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Aprilia Master
  • 4,536 Answers

For power u need spark gas and compression--hav u tested the batt for holding a charge-how tite are the cables make sure fuel is gitten to carbs-they may need ajust--lastly a compression test will show if u need new hardware

Posted on Sep 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

New belt seems to be too short cant get it on


Is this the belt for the "Power Nozzle"? If so, once you have the bottom plate removed to get at the roller brush. You will be able to carefully pull/pry the roller out. It is one piece with bearing/bushings one each end. They are friction fit (held in by friction - no screws, glue or other fasteners). Remove the roller straight out, slip the belt over the roller and carefully put the roller back in. If it still won't fit, you might want to ensure you have the proper replacement belt.
see this video as an example:
Belt replacement on Rainbow e2 Black Power Nozzle

Aug 12, 2014 | Rainbow E series Canister Wet/Dry Vacuum

1 Answer

I need instructions on how to change the belt on my Hoover Model U4264-930 vaccum.


Tool Needed, flat head screwdriver (larger one works a little better). Serious Safety Precaution: Make sure unit is unplugged. Preliminary: Check: that nothing is caught like threads etc, preventing roller brush from turning. I've had this model vacuum 10 years and have pulled threads out countless times. However it still has the original belt on it. To change belt: 1.) There is a plastic plate underneath roller, towards front.. Pry the 3 tabs at front, the plate hinges downward slightly (to clear the front tabs). Next, there are 2 little clips at bottom of plate. Insert screw driver at each of these clips to fully release the plate the rest of the way. (Or it may even come off without having to pry back on these. The plastic clips need pushed towards front, to clear the ridge that catches towards the back). Pry one, then the other, clip forward, while gently pulling the plate the rest of the way out. (Gentle prying will assure it will snap back together OK, so you still get a good seal.) You now should see the whole roller brush. 2.) Remove the shell/motor cover: To do this, a.) pull off the rug height adjuster lever, and take not where you put it so you won't loose it. b.) push foot release down and keep vacuum bag in the vacuuming/hinged/operating position (not the upright/locked position), and position cleaner on it's side, or upside down. c. Pry around the bottom edge, starting at right corner, then go around, prying in about 4 different places. Shell/motor cover will now easily pull off (upward and out towards front), exposing motor shaft and light bulb. 3.) remove belt from motor shaft. 4. slide roller and old belt out the bottom. 5.) remove old and place new belt on roller 6.) slide roller back into place. 7.) wrap other end of belt on motor shaft. 8.) shell cover, rug height adjuster knob, and bottom plate snap back into place. check that roller turns without much effort. 9.) It now should be ready to plug in and vacuum.

Aug 21, 2011 | Hoover Soft Light Supreme U4262-930 Bagged...

1 Answer

How do I change my belt?


1. Turn vacuum over so base of powerhead is facing up.
2. Remove the two screws near the roller.
3. Release the two hooks over the brush by pushing outward.
4. Gently lift and remove the plate.
5. Lift and remove brush roller.
6. Remove belt.
7. Place belt over roller in the area with no bristles.
8. Insert brush back into holder and loop belt over motor shaft.
9. Rotate the roller a few times to make sure the belt is properly positioned.
10. Replace the plate over roller, making sure the front tabs line up with the slots on the base.
11. Flip down to secure hooks.
12. Press down on plate to secure it.
13. Replace screws.
14. Turn roller a few times.

And you're done.
The manual with illustrations and instructions can be found using the below link.

http://www.dirtdevil.com/search.aspx?q=UD40135&type=3

Jan 21, 2011 | Dirt Devil Featherlight Bagless Upright...

1 Answer

How do you change the belt


on the bottom of the vacume you should see about 4 screws ( philips ) that hold the plate in place, remove the screws and plate and this will expose the motor shaft,belt and roller ( you should also see the broken belt there two ) -- pop out the roller ( pull straight up ). put new belt onto the motorspindle and then onto the roller, snap roller back into place ( note: on the edges of the roller it is somewhat keyed to only fit into the vacume a certain way ), replace the the plate and screws and you are good to go. also while you are getting dirty -- clean the air filter and examine the hose between the floor roller and the suction hose for dirt build up and debris.

c...

Jan 01, 2011 | Dirt Devil M086700 Vision Bagless Upright...

2 Answers

Broken belt i need a replacement belt for eureka altima bagless vacuum


Eureka says size U BELT... NO!! I have tried this numerous times. I finally took off a belt from an old vac. and it works !!! dirt devil size 5 belt is the way to go!!

May 08, 2010 | Eureka Altima Upright Vacuum Model 2996AVS...

2 Answers

Aprilia sr 125


if its the same problem i had if you have been runnin it wit the oil low its cz there wil be an air bubble in ur oil pump which is causing it to slightly seize just a sugestion flush the oil pump n good luck i hope this solves it

Mar 07, 2009 | 2000 Aprilia Classic 125

1 Answer

I have a Hoover TurboPOWER 7300 Windtunnel V2-belt change


1. Remove the 4 screws holding the bottom plate.
2. remove roller and old belt
3. install new belt on motor spindle first and then on roller.
4. pull roller, stretching belt, set into roller cavity.
5. turn roller by hand to center belt.
6. reinstall bottom plate.& screws

Feb 26, 2009 | Hoover U5444-900 5100 Wind Tunnel 15 Inch...

3 Answers

Changing Belt on Riccar 8650


Greetings from GoVacuum,

I will attempt to walk you through the belt change on your Riccar 8955 upright vacuum cleaner. I have taken pictures for you for each step to ensure that it's done properly. What you'll need to have handy for this repair;

- Phillips Head Screw Driver
- Riccar 4000 / 8000 Series Belt
- Riccar 8000 Series Roller Brush With Clutch Assembly (only if the brushes have worn down, not necessary if brushes are still long)

Step 1: Make sure the vacuum cleaner is unplugged, and turn the vacuum cleaner upside down so the bottom plate is upwards. It's easiest to do on a work bench or counter top.


bbed7f9.jpg

Step 2: Unscrew the two metal screws on the metal bottom plate with your Phillips head screw driver, and remove the bottom plate from the vacuum cleaner so the belt is completely exposed with the roller brush


Step 3: Remove the belt guard that sits to the left of the roller brush, and is a metal part that protects any dirt & debris from going over to the belt. Here's a picture of that part being removed;
011205a.jpg

Step 4: Remove the Rug / Floor actuator arm from the clutch on the right hand side of the roller brush. Simply pull the metal actuator arm to the left of the brush and out of the circle that it sits in. Here's a picture of that;

0a5aafc.jpg

Step 5: Once you have removed the actuator arm for the clutch, as well as the belt guard, lift straight up on the roller brush and remove the roller brush from the vacuum cleaner:


d6b6384.jpg
Step 6: Once you have removed the roller brush, and the old belt from the vacuum cleaner, take one new belt and wrap it around the metal pin in the back of vacuum cleaners agitator housing. Here's a picture of where that pin is located with the belt wrapped around it;


c0bc5cf.jpg
Step 7: Once you have the belt wrapped around the metal pin (this is the shaft to the motor that actually spins the belt), but the other end of the belt through your new roller brush;


1e0386b.jpg
Step 8: There is a specific way that the roller brush has to be inserted. If the roller brush is not put in properly, this can cause all sorts of problems including the brush not spinning, and continuously having to replace belts. You can see on the end cap of the roller brush (the right side where the belt rides) that there is two little teeth that protrude out of the end cap as well as an indentation on the opposite side;

04e3743.jpg
Step 9: With the roller brush inserted through the belt, position the two teeth facing downwards. You can see in the vacuum cleaner where the roller brush sits, a little groove down inside of the housing. These two teeth need to straddle that groove. Also make sure that the little ring, or circle that the clutch actuator arm sits into, is facing upwards completely. It should be directly on top of the two teeth. Stretch the belt using the roller brush as leverage down into the agitator housing of the vacuum cleaner, making sure that the two teeth are facing downwards straddling the little groove. After the brush is back into the vacuum cleaner, take the metal actuator arm from the rug / floor switch, and insert it back into the metal ring (or hole) on the roller brush;
88581e1.jpg
Step 10: Replace the metal belt guard that rests to the left of the belt. You'll notice on the belt guard that there are two little 90 degree notches on both sides. These notches need to face towards the belt or to the right. Here's a picture of the belt guard being put back into place;

dfaabe8.jpg

Step 11: After inserting the belt guard back into the vacuum, turn the vacuum cleaner over so the top of the agitator housing is facing you. Change the the rug / floor switch from bare floors to the carpet setting, and the turn the vacuum upside again so the brush and belt are exposed:


8cd34ee.jpg
Step 12: With the vacuum set to the carpet setting, pull the belt forwards to ensure that the brush is spinning freely. If the belts do not spin freely, repeat steps 2-10.

d433465.jpg
Step 12: There is a flap that can be opened after the metal bottom plate has been removed, that will give you more access to the motor shaft. Make sure that this flap is closed;

e6dde78.jpg
Step 13: The last tricky part can be reinstalling the metal bottom plate. There is a little lip on the front of the vacuum cleaner that the edge of the bottom plate has to slide under for it to be installed properly. A lot of people just install the bottom plate over top of this lip, and this prevents the brushes from hitting the carpet as low as if the bottom plate is correctly installed. Here's a picture of the lip with the bottom plate in the backgroud;


a34ed7a.jpg
Step 14: Slide the metal bottom plate into the lip on the vacuum cleaner, and fasten the screws back into the bottom plate to secure it. The lip is a little tricky, but after doing it just once, you'll have no problems in the future changing your belt.

Here's a picture of the bottom plate installed INCORRECTLY with the bottom plate over top of the lip;

fc1c13a.jpg
Here's a picture of the CORRECT way to install the bottom plate:


570c909.jpg
I hope that this repair solution is helpful to you in installing the belt properly. If you found this helpful, please be sure to click the 4 Thumbs Up Icons in the top right hand corner of the solution. Feel free to request a clarification of the repair if you have any questions about this repair, or other repairs. I'm always happy to answer any questions.

Thank you very much,

Chris J.

Feb 17, 2009 | Riccar 8650/8625 s Vacuum

3 Answers

Is there a drive belt on the heritage 84


Yes it has a belt. Could be the belt or a worn out brush roller, or you don't have the height adjustment set right. But I would check the belt first. It is the cheapest part and if you haven't changed it lately it probably needs it anyhow.

If you haven't changed the belt before it's a little tricky.

Turn the knob on the front to the belt off position, and unlatch the top of the nozzle to remove it. Pull the nozzle off and turn the knob to the belt on position. Take off the bottom plate and take out the old brush roller and belt. Pay special attention to how the roller comes out. You don't want to get it in backward.

Put the new belt on the roller and center it. Put the roller back into the nozzle and put the bottom plate back on. Turn the knob to the belt off position you should be able to see through the hole in the back, the hook pick up the belt and stretch in up.

Put the nozzle back on the unit, latch the top, and turn the knob to the belt on position. Simple Right? LOL

It has to be one of the most complicated machines to change a belt on .

P.S. they usually give you extra belt when you buy it, and the new style knurled belts work fine as well.

Good Luck-Don't be afraid to ask another question if that doesn't solve your problem.

Dec 01, 2008 | Kirby Heritage II Vacuum

1 Answer

Chaning the belt


there is a plate on the underside covering belt and beater roller
2-3 screws to secure the plate
then withdraw the roller
put new belt round roller
insert roller
pull belt around motor pulley
reinstall plate

Oct 05, 2008 | Hoover Commercial C1403 Bagged Upright...

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Aprilia Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you an Aprilia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...