Question about 1989 Honda CBR 600 F Hurricane

1 Answer

1992 Honda CBR 600 F2 headlight not working

I have a 1992 Honda CBR 600 F2 that has no head lights no tail light or brake light. The other day I ran off the road by somebody that either did not see me in the lane or just didn't care. I ended up barely missing another car coming head on and ended up laying it down on the curb/sidewalk and the bike slid eventually into a street sign. This cracked the fairings/plastics on the front of my bike and put some minor scratches down the sides but after the wreck, everything worked ok except the high beam on my headlight. I had low beam tail light and brake lights. The next day I went to ride my bike and had no headlight at all no tail light or brake light. I have turn signals gauges horn etc. but for some reason now can not get the headlight tail or brake light to work. The fuses are ok and I even tried new ones and see no visual wires broken bared crossed or shorting anywhere. Is there a Relay or inline fuse somewhere that I am missing or something like that or what else could be causing this problem? @

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Honda Master
  • 47,865 Answers

Hi, Gary if your headlight is not working, intermittent, only one beam works, keeps burning out, blinking, dim or surges from bright to dim to bright the first thing you need to check is the headlight bulb for damaged filaments then check your light circuit fuse, then check your head light bulb socket ground wire for a clean tight connection, that being said the usual suspects are:
1. Faulty ground or power supply wire to headlight bulb socket.
2. Worn down solder contacts or loose fit of the bulb base in the socket due to vibration.
3. Worn, chafed, or broken wires in the light circuit.
4. Corroded, broken, or loose pins/sockets in wire connectors.
5. Faulty hi/low beam switch.
6. Faulty ignition switch.
7. Fuse is good but no continuity on both sides.
8. Faulty headlight relay.
9. Faulty wiring between battery positive and headlight bulb socket.
10. Weak charging alternator/generator/lighting coil
11. Faulty voltage regulator/rectifier ground or overcharging.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Tail light out not working CBR Forum Enthusiast forums for Honda CBR Owners
Brake Light not working
Honda cbr600 1991 1994 service manual
https://www.partsfish.com/page/oem-parts-for-honda
Honda CBR600F Ower Manual

Posted on Feb 13, 2018

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

SOURCE: 84 honda shadow 700 vt lights are unpredictable

There seems to be some short in the circuit of the high beam, you will have to follow the high beam wiring, best would be to get the color of the high beam wire frm the head light bulb socket and trace it along you will sure find somwhere the along it the short.
Check the light switch and the blinker switch too.
Hope this helps!

Posted on Jun 25, 2009

ultrat
  • 500 Answers

SOURCE: 2002 HARLEY DYNA LOW RIDER

Look for chafing of wiring.. your on the rite track keep isolating wires..use a vom to locate a grounding of a wire,,good luck, something like this may take time...

Posted on Mar 30, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1992 Honda CBR 600 F fork oil capacity


Hi, Anonymous for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
fork oil levels CBR Forum Enthusiast forums for Honda CBR Owners
Honda CBR 600 F2 02
Honda CBR600F4I 2001 Service Manual
https://www.partsfish.com/page/oem-parts-for-honda
Honda CBR600F Owner Manual

Mar 04, 2013 | 1992 Honda CBR 600 F(2)N

1 Answer

1991 Honda CBR 600 F2 wiring diagram


Hi, Djeproductio for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
1991 Honda CBR 600 F2 wiring diagram Google Search
Honda Motorcycle Wiring Diagrams
Honda CBR600F4I 2001 Service Manual
https://www.partsfish.com/page/oem-parts-for-honda
Honda CBR600F Owner Manual Page 3

Jan 08, 2018 | 1989 Honda CBR 600 F Hurricane

1 Answer

1993 Honda CBR 1000 F tail lights not working


Hi, Anonymous tail light issues are relatively easy to diagnose and repair always check the tail light fuse first and make sure you have power on both sides of the fuse holder and the usual suspects are:
1. Tail light bulb element is broken.
2. Tail light bulb soldered contacts are extremely worn down.
3. Tail light bulb socket corroded.
4. Tail light bulb socket has no power and or ground.
5. Tail light wiring harness damaged from the rear tire.
6. Tail light rear fender wiring harness connector faulty due to corroded, broken, or loose pins/sockets.
For more information about your issue and valuable "FREE" downloads that you need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Help rear brake light does not work CBR Forum Enthusiast forums for Honda...
How to CBR Brake Switch Fix
http://www.cbr1000f.org/data/downloads/honda_cbr1000f_93_service_manual.pdf
https://www.partsfish.com/page/oem-parts-for-honda
Honda 1990 CBR1000F Owner Manual

Sep 15, 2012 | 1993 Honda CBR 1000 F

1 Answer

1996 Honda CBR 600 F(3)T headlight keeps burning out


Hi, Anonymous if your headlight is not working, intermittent, only one beam works, keeps burning out, blinking, dim or surges from bright to dim to bright the first thing you need to check is the headlight bulb for damaged filaments then check your light circuit fuse, then check your head light bulb socket ground wire for a clean tight connection, that being said the usual suspects are:
1. Faulty ground or power supply wire to headlight bulb socket.
2. Worn down solder contacts or loose fit of the bulb base in the socket due to vibration.
3. Worn, chafed, or broken wires in the light circuit.
4. Corroded, broken, or loose pins/sockets in wire connectors.
5. Faulty hi/low beam switch.
6. Faulty ignition switch.
7. Fuse is good but no continuity on both sides.
8. Faulty headlight relay.
9. Faulty wiring between battery positive and headlight bulb socket.
10. Weak charging alternator/generator/lighting coil
11. Faulty voltage regulator/rectifier ground or overcharging.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Blowing out lightbulbs anything should check CBR Forum Enthusiast forums...
http://www.fireblades.org/forums/electronics/80142-headlight-keeps-burning-out.html
Honda CBR600F4I 2001 Service Manual
https://www.partsfish.com/page/oem-parts-for-honda
Honda CBR600F Owner Manual

Feb 03, 2012 | 1996 Honda CBR 600 F(3)T

1 Answer

Cut wires from a rigged up tail light and now the head light don't work, the fuel pump don't prime and the bike won't start. Bike ran fine the day before.


Fuse "B" has failed due to a shortcircuit when the wires were cut.
There are 6 fuses in the fuse cluster along with the clutch diode.

Insulate or re connect the cables and replace the blown fuse.
Hope this helps.

Nov 24, 2010 | 2004 Honda CBR 600 F(4)i

1 Answer

2002 Honda CBR 600 F(4) I how to install kill switches to head and tail light


Hi, Smayfield80 for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Light kill switch
How to Convert your Killswitch into Lowbeam Headlight On Off Control
Honda CBR600F4I 2001 Service Manual
https://www.partsfish.com/page/oem-parts-for-honda
Honda CBR600F4i Owner Manual

Nov 12, 2010 | 2002 Honda CBR 600 F(4)i

1 Answer

1992 Honda CBR 600 F(2)N fork oil capacity


Hi, Bipjohnsey for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
fork oil levels CBR Forum Enthusiast forums for Honda CBR Owners
Honda CBR 600 F2 02
Honda cbr600 1991 1994 service manual
https://www.partsfish.com/page/oem-parts-for-honda
http://www.hondampe.com.au/docs/owning_a_honda/owners_manuals/motorcycles/CBR600F-1994.pdf

Sep 04, 2010 | 1992 Honda CBR 600 F(2)N

1 Answer

Brake and tail light only work sometimes and the fuses are good


when i had my problem it ended up being a sticky spring return switch that connects to the rear brake pedal.

Aug 13, 2010 | 1992 Honda CBR 600 F(2)N

Not finding what you are looking for?
1989 Honda CBR 600 F Hurricane Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4825 Answers

yadayada
yadayada

Level 3 Expert

79186 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...