Question about 2000 Harley Davidson FXDWG Dyna Wide Glide

1 Answer

Remove battery from a 93 harley davidson fxd/wg

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,565 Answers

On the right side of the bike, there are two bolts in the frame between the battery tray and the rear fender, loosen these two bolts, do not take them out. Take the seat off the bike. Look down into the frame just inside the battery and you'll see the head of a "jack bolt". Turn this bolt counterclockwise and the battery tray (with the battery) will lower allowing you to remove the battery top cover and surround. Now, you can get to the battery.

Good Luck
Steve

Posted on Sep 07, 2010

  • wd4ity
    wd4ity Sep 07, 2010

    the seat is held by a single screw at the very back of the seat that screws into the rear fender. Remove the screw and lift the rear of the seat and pull it to the rear. You may have ot take the sissy bar off as well.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I am new to riding. My 2003 Harley Davidson FXD Super Glide started fine until I put 93 gas in it now it will not do anything. help please


Hi, Anonymous and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Bank angle sensor tripped and ignition/light key switch not cycled to the "OFF" position and then back to the "ON" position.
5. Security alarm needs a reset.
6. Starter control circuit, relay, or solenoid faulty.
7. Faulty starter button.
8. Electric starter shaft pinion gear is not engaging or over-running starter clutch slipping.
For more information about your issue, please visit the websites below, and for specific information or questions please feel free to contact me at xlch@mail.com. Good luck and have nice a day.
Superglide won start Please Help Twin Forum Harley Davidson Forums
Harley Davidson Manuals Mark Workshop
http://www.stcharlesharleydavidson.com/OEMpartfinder.htm
Owner Manuals Harley Davidson USA

Jan 03, 2016 | 2003 Harley Davidson FXD Dyna Super Glide

1 Answer

Changing starter on 97 fxd harley davidson


Hi Anonymous, disconnect battery negative cable, drain and remove primary cover, remove starter jackshaft bolt while holding pinion gear, remove chrome starter end cap, remove all wires and cables from starter, remove front and rear starter mounting bolts, remove starter. Good luck

Apr 09, 2014 | 2003 Harley Davidson FXD Dyna Super Glide

1 Answer

Harley davidson FXD dyna super glide , how to change the battery


what year is your bike? on my 2005 dyna fxd, there is a small bracket adjacent to the battery box on the right side of the bike. there are two bolts in it. one screws in vertically upward. completely loosen that bolt but do not remove it. there is another bolt that screws inward horizontally. you can remove that bolt. the battery box/ tray should then pull down and angle outward to allow access to the battery. the negative cable should be the first cable removed and the last one connected.

Jan 22, 2013 | Harley Davidson FXD Dyna Super Glide...

1 Answer

Rewireing 93 harley davidson FXLR to 96 Handle bar


On the handlebar switches, Harley hasn't changed the color code scheme very much over the years but you really need a good schematic to know exactly how they are wired up. If you can find either a Harley service manual for a 96 model or a Clymer's manual, it would be helpful. I have a schmatic for a 94 FXDWG that should be alright for your 93 FXR but you need a schmatic for a 96 model bike.

Oct 07, 2009 | 2000 Harley Davidson FXD Dyna Super Glide

Not finding what you are looking for?
2000 Harley Davidson FXDWG Dyna Wide Glide Logo

321 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...