Question about 2003 Harley Davidson FLSTCI Heritage Classic

1 Answer

Oil indicator light stayed on. Changed oil filter. Spits oil. Sounds like metal below carb. Spits oil. What is wrong?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,565 Answers

Doesn't sound good. The section just below the carb is the cam chest and that's where the oil pump is located. I'd go in there to check it out if you have the tools and the experience. If not, take it to someone that does have the experience. If you don't have any oil pressure on the engine, the tappets will rattle loudly.

Good Luck
Steve

Posted on Sep 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 Suzuki boulevard c-90 I changed oil and filter but the oil light stays on so I changed the oil and filter again and the oil light is still on .


Hi, Gene you may have air in the system try bleeding it out like you would for brakes by loosening the oil pressure switch or oil filter with the engine running and watch for bubbles when they stop re-tighten and your good to go, for more information about your question and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Red Oil Light Stays On
Oil light coming on
Suzuki C90 Oil Change and Final Gear Oil Boulevard
Suzuki VL1500 Service Manual
OEM parts for Suzuki
Suzuki VZ1500 Owner Manual

Oct 21, 2016 | 2005 Suzuki Boulevard C90

1 Answer

1991 mazda b2600 truck oil light dashboard comes on even with oil


Rod and main bearings are shot. Time for another engine, if you really like this old truck.

Jul 27, 2016 | Mazda Cars & Trucks

2 Answers

Have an 04 lancer. Oil light comes on sometimes just flickers, but only after warmed up and at an idle. driving down the road the light stays off. Oil never low and just changed with filters, brand new...


Replace the oil pressure sender. The sender is what is turning the warning light on.If you replace the oil pressure sender it should fix the flickering light problem. If it does not , the light is an indication of more serious motor killing problem. Fortunately, the sender is under $10 and usually fails before the actual oil pump.

Nov 06, 2010 | 2004 Mitsubishi Lancer

2 Answers

1993 VW golf 1.8. oil is leaking from oil pressure sending unit, i've replaced the unit but now the low oil warning buzzer is going off (didn't previously do this) and warning light stays (also not a...


It seems the fault is with the oil pressure switch you have replaced. This switch seems to need a higher pressure to cut off and the oil pressure light is coming on because it indicates low.
So if your oil is good , the oil filters were changed recently this fault must not come up. if not replace oil and oil filters to check but keep this option that the fault was never there earlier and a new part can also be faulty.

Sep 24, 2010 | 1993 Volkswagen Golf

1 Answer

Snapper lawnmower will not start - sparkplug is good, air filter clean, no idea what is wrong


Try a touch of starting fluid right into the carburator by taking the air filter off. If it then starts but wont run or stay running, the reservoir below the carb should be removed to clean at and the pinhole in the vertical intake tube above the bowl nut. This is the most common problem with lawnmower start problems, the pinhole can be unplugged with one wire from a wire brush. Be careful with the gas, at least pinch off the gas hose with a vise grips while removing the carb bowl.. Never use a droplight around gasoline. most lawnmowers have no mixture adjustments, so it is a matter of cleaning the carb, tank, gas lines. Some oils in gas mix systems settle and clog after less than one season. Spark can be tested by sight, remove the plug and use a clip-on ground wire from spark plug body to metal on the engine with the plug wire connected.

Jul 05, 2010 | Omega Rear Drive Wheel Snapper Mowers

2 Answers

Oil indicator light is on


REPLACE THE OIL PUMP FOR WHAT EVER REASON...YOUR SUV ISNT GETTING OIL

Aug 31, 2009 | 2002 Mitsubishi Montero Sport

1 Answer

2007 Escape oil pressure issue/oil pump


one thing to keep in mind that even though the vehicle is new you can still have major engine issues, because of the bearing material may have been bad at production.taking this in account any part on a vehicle can fail prematurely either because of poor insatllation or improper manufacturing. As far as oil filters are concerned bthe odds of mechanic installing the wrong filter are slim to none.the oil pressure sending unit only senses that here is oil flowing through it. it doesn't set the light off unless there is absolutely no pressure at all the only way to see the pressure is to have a gauge. oil prssure should be abot 45 psi at 2000 rpms. the only way a filter would effect oil pressure is if it was completely clogged. It would take a great deal of coolant in the oil to ruin a set of bearings and before that happens your vehicle would not run very well and you would notice a great amount of white smoke out the exaust. this would indicated either a blown head gasket.cracked head or a cracked block. you never mentioned what they found in the anaylasis of the oil. I presume that your vehicle is still under warrenty on the powertrain. I would suggest that you have the dealership check your oil pump out. every vehicle will have a small amount of metalic residue in the oil. large shavings and chunks of metal would be a worry. please rate this thanks.

Sep 25, 2008 | 2007 Ford Escape Hybrid FWD

Not finding what you are looking for?
2003 Harley Davidson FLSTCI Heritage  Classic Logo

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...