Question about Hero Honda Super Splendor Motorcycles
Drain the carburetor. There should be a screw on the lower side or bottom of the carb float bowl. Remove the screw then replace it after the fuel drains. Turn the gas back on and wait a minute for the carb to fill with gas. If the bike still has the problem, shut off the gas and remove the carburetor from the engine.
Remove the float bowl and clean the entire carb with a spray carb cleaner from the auto parts store. Wear protective goggles to avoid getting spray in your eyes. Spray into all the little airways and fittings in the carb. Remove the idle screw and the air screw on the outside throat of the carb and spray into the screw holes as well.
Be sure to put these two screws back in the same hole they came out of. IMPORTANT > do not tighten these two adjusters down. Only screw these in until they LIGHTLY seat. Now turn each adjuster one and one half turns outward. Put the rest of the carb back together, clean the air filter and install the carb. Let the float bowl fill then start the engine. Please rate my answer. Thanks.
Posted on Sep 04, 2010
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Dec 23, 2015 | 2006 Hero Honda Passion Plus
Oct 24, 2012 | 2006 Hero Honda Super Splendor
Dec 29, 2010 | 2006 Hero Honda Super Splendor
Oct 10, 2010 | 1993 kawasaki ZXR 400
May 03, 2010 | 1988 Honda VT 1100 C Shadow
Jan 16, 2010 | 2008 KTM 125 SX
Oct 09, 2009 | 2000 kawasaki EL 250 Eliminator V
Mar 05, 2017 | 2005 KTM 625 SMC
Nov 10, 2008 | 2006 Hero Honda Splendor+
Nov 10, 2008 | 2006 Hero Honda Karizma
492 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: