Question about 1999 kawasaki ZX-6R Ninja

Open Question

Hello.I have a kawasaki ninja zx6r g2 model from 1999.the problem is i want to replace the spark plugs and i dont know which spanner to use in what size. THANK YOU!

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
cape cod bob
  • 292 Answers

SOURCE: i want the suspension settings for a 2001 j2

you want what kind of suspension settings?

suspension front and rear are both tunable to riders weight and riding style. if you think it's too soft, stiffen it up and vise vesa

Posted on Mar 31, 2009

Ad
  • 132 Answers

SOURCE: I want to chang the horn in my kawasiki ninja zx6r

the horn is only held on by 1 bolt,undo this and remove the 2 wires then just reverse these steps to refit

Posted on Jun 13, 2009

  • 3567 Answers

SOURCE: need to remove the cam chain on my kawasaki zx6r

Cam chain replacement is a bit complex for a beginner. I don't recommend it. However, I would suggest the best way is to have a service manual at hand. Go to this site and you can download a free PDF service manual.www.carlsalter.com/motorcycle-manuals.asp

The 2005 manual (4th from the bottom), is 11MB. You can go with the '05 manual as the service proceedure is the same as the 1998. The 2002 manual is 80 MB (scanned differently).

70adb57.gif

Go to the site below where you can see a parts diagram for your specific bike. You will select the actual brand, year, model, etc., once you go to the site. Part numbers and prices are also shown. You can order parts from this site. In the event no price is shown on a particular part and/or the notation "Not Available" is in the description, the part is not in stock. www.babbittsonline.com/pages/parts/viewbybrandand/parts.aspx

Can I get a “very helpful” rating on this answer?

Posted on Aug 14, 2009

  • 563 Answers

SOURCE: paint colour for wheels on kawasaki zx6r ninja

Dealers usually have these paints. Alternative is to use the high temp engine block paints.( AutoZone, Advance Autoparts..)

Posted on Oct 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 99 g2 kawasaki zx6r. Once warm it runs round and seems to run on 3 cylinders.


Hi, Steven and the usual suspects are:
1. Severely discharged or a damaged battery, should have 12.5 volts or better and be able to pass a load test if necessary.
2. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
3. Spark plugs in bad condition or partially fouled.
4. Spark plug cables in bad condition and leaking.
5. Spark plug gap too close or too wide.
6. Faulty ignition coil, module, and or sensor.
7. Loose, dirty, or corroded ignition module connector at crankcase.
8. Faulty CKP or CMP, MAP, ETS, ATS, TPS, O2 sensor.
9. Intake air leak.
10. Water, dirt, or rust in the fuel system, carburetor and/or filter.
11. Fuel tank vent system plugged or carburetor vent line closed off.
12. Vacuum line from intake manifold to fuel valve is broken, cracked, pinched, or missing.
13. Carburetor controls misadjusted.
14. Damaged carburetor.
15. Incorrect valve timing.
16. Weak or broken valve springs.
17. Damaged intake or exhaust valve.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
My zx6rMovie cleaning pilot jet on kawasaki zx6r only running on 3
http://support.bazzaz.net/service_manuals/ZX600G2.pdf
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Jul 18, 2016 | kawasaki Motorcycles

1 Answer

How do i gt to the spark plugs on my 2004 kawasaki ninja zx6r


YOU HAVE TO REMOVE THE SEAT, TANK AND AIR BOX, THE PLUGS ARE LOCATED IN THE CYLINDER HEAD THE PLUG CAPS COMPLETELY COVER THE HOLE IN THE HEAD THE PLUG SITS IN, (TIP) DO 1 PLUG AT A TIME MAKING SURE YOU REPLACE THE CAP BEFORE YOU DO THE NEXT 1, THIS WAY YOU WONT MIX UP THE LEADS, REMEMBER THE PLUGS SIT IN A DEEP HOLE AND ARE QUITE EASILY CROSS THREADED, REFIT USING CORRECT SPANNER BY HAND, TO START WITH WHEN YOU ARE SURE THE PLUG IS IN CORRECT THEN FINNISH OFF TO THE CORRECT TIGHTNESS WITH A WRENCH

Feb 27, 2011 | kawasaki ZX-6R Ninja Motorcycles

1 Answer

My 01 zx6r ninja wont start


Make sure you are getting a solid spark to the plugs - Take out the plugs and leave them sitting on the head, turn over the engine and see if you are getting a strong blue spark. If not, I'd say your CDI unit needs replacing (Capisator Discharge Ignision)

Aug 11, 2010 | 2001 kawasaki ZX-6R Ninja

2 Answers

Floating valves zx6r ?????????


yes. it has shims, and they need to be checked and adjusted about every 15,000KM

May 17, 2010 | 1999 kawasaki ZX-6R Ninja

1 Answer

Take the bike to about 9000 rpm and it starts to back fire zx6r g2


at those revs the valves are probably starting to float, something to look into,i may be wrong

May 17, 2010 | 1999 kawasaki ZX-6R Ninja

1 Answer

Type of spark plugs for a 1999 zx6r


factory plug is a NGK CR9E, for a performance plug use the NGK CR9EIX

May 15, 2010 | 1999 kawasaki ZX-6R Ninja

1 Answer

Type of spark plugs for a 1999 zx6r


Hello. Just go to the local auto parts store and tell them which bike you have. They will cross reference your bike to the brands of spark plugs they carry to insure that they sell you the correct ones. Joe

Mar 29, 2010 | 1999 kawasaki ZX-6R Ninja

1 Answer

Air filter removal?


Clean your air filter in warm soapy water with a small brush. Rinse after cleaning and allow to fully air dry and then replace.

Jul 06, 2009 | 1999 kawasaki ZX-6R Ninja

1 Answer

Oil breather problem


keep your oil breather unblocked all the time's coz the pressure of it can destroy your gasket and oil seal.

Mar 28, 2009 | 1999 kawasaki ZX-6R Ninja

Not finding what you are looking for?
1999 kawasaki ZX-6R Ninja Logo

Related Topics:

331 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...