Question about 2000 Harley Davidson FLHTCUI Electra Glide Ultra Classic

1 Answer

I have a 1998 flhtcu with fuel injection. How to trouble shoot the fuel pump relay and pump? Where is the relay located? Thanks

Posted by on

  • valcwik Sep 04, 2010

    Checked the relay I had power to the pump wire for the appropriate amount of seconds at the initial start.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 73 Answers

Are you sure its a pump or a relay? relay is under the seat or under the cover on left hand side cant remember on a 98. also check the petcock fuel filter it gets pretty stuffed with ****. part is $9.00

Posted on Sep 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there a kill switch on a 1998 Chevy Monte Carlo and if there is, where is it located?I


Kill switch for what ? Fuel pump ? It doesn't matter there isn't one on GM vehicles . Do you know how to do basic automotive electrical circuit testing . If not suggest you go on youtube an watch some videos on trouble shooting electrical circuits , how to test GM fuel pump relay circuit , how to read a wiring diagram . Know how to diagnose be for replacing parts ,

Jul 23, 2016 | Cars & Trucks

2 Answers

Where is the fuel reset button on a 1998 Chevy Tahoe


There is no fuel reset button on Chevy vehicles . I suggest you watch this video on fuel pump relay testing . GM Fuel Pump Relay Testing Because this is what is involved in trouble shooting fuel pump systems on GM vehicles !

Sep 21, 2015 | Cars & Trucks

1 Answer

Fuel problem


Get a diagnostic check preferably from your cars agents. There are many problems fuel delivery can be with most vehicles being Fuel Injected.

Jan 31, 2014 | Cars & Trucks

1 Answer

I need a wiring diagram for 1995 2500 6.5 turbo diesel electric fuel pump circuit


The primary (coils) side of the fuel pump relay is powered by the CRANK fuse (10 Amp) located in the instrument panel fuse block. This fuse is hot ONLY when the ignition switch is in the CRANK position. The secondary (contact) side of the relay is powered by the ECM-B fuse (20 Amp) which is hot at all times. This fuse is located in the engine compartment fuse block. The electric fuel pump in the tank only operates during engine cranking.

Feb 19, 2012 | 1995 Chevrolet Silverado 2500

1 Answer

Electical trouble shooting


Your solution is simple,1998 Jeep Cherokee. The ASD relay gives power to the fuel pump the injectors and distributor also the Oxygen sensor heater circuit. 1st check the fuel pump fuse make sure its not open. If it is open you are dealing with a short to power located at the Oxygen heater circuit,these wire are prone to short together you may have to open the wiring harness and make the inspection if power steering fluid or transmission fluid has degraded the wires you will have to solve for the fluid leaking to protect the harness(wires) from shorting

Dec 31, 2011 | 1998 Jeep Cherokee

1 Answer

1998 sometimes has trouble starting. Occasionally it will stall out when I start it and will take a while to start but when it does it runs fine and never have an issue it has new fuel lines, tank, and...


Hi Mat, If the vehicle has fuel injection, try replacing the fuel pressure regulator. I hope that when replacing the fuel lines the filter was also replaced. make it a habit to use genuine replacement parts when replacing filters, as some we have on the market these days have a tendency to collapse when under pressure and thereby block the system. It would seem that your vehicle has a fuel delivery problem or work required on the throttle by pass system in the throttle body of the injection system. Regards Johngee10

Oct 05, 2011 | 1998 Chevrolet S-10 Pickup

2 Answers

Obd code of p0411 on a 1999 ford mustang 3.8 v-6 what do I check to correct


That's s failure of the secondary air pump. It'll have to be changed. It's an emissions component meant to help with cold start emissions. It won't cause engine running trouble but at inspection time you'll fail for smog. Change it before then and you'll be fine.

May 16, 2010 | 1999 Ford Mustang Cobra

1 Answer

Where is the fuse & relay switch for the fuel pump located.


Locate the fuse box. Facing the engine, the box is located on the the right fender. The fuel pump fuse should be labeled, The fuel pump relay is Incorporated in the FI relay located under right center of dash. It is a metal relay usually bolted to the floor near the ecm. Good luck and hope this helps but first replace the the fuel filter since it's the easiest thing to do.

Jul 11, 2009 | 1994 Mitsubishi Mirage

1 Answer

1993 ford escort wagon,no electric to injectors


The fuel delivery system uses an electric fuel pump to provide high-pressure fuel to the fuel injectors. The fuel pump is located at the rear of the vehicle, mounted in the fuel tank. It can be accessed by removing the rear seat.

The fuel tubes leading from the fuel tank to the engine are under pressure during vehicle operation. When the engine is turned OFF, the fuel in the fuel tubes remains pressurized for long periods of time to provide quick start-ups. Fuel not used by the fuel injectors during operation is routed back to the fuel tank through the fuel return tube.

The fuel handling components are protected by three fuel filters. A replaceable in-line fuel filter is located inside the engine compartment between the fuel tank and fuel injection supply manifold. A serviceable filter screen is located inside the fuel tank at the fuel pump inlet. A non-serviceable filter screen is incorporated into each fuel injector.


I can get you trouble shooting tips if you want them.
58866017
125387887

Nov 18, 2008 | 1993 Ford Escort 4 Door

1 Answer

1998 Chevrolet Z71


The fuel pump will be located in the fuel tank if engine has fuel injection. If your engine has a carburetor the fuel pump will be located on the right hand (passenger) side of the engine block.

Jun 25, 2008 | 1998 Chevrolet Blazer

Not finding what you are looking for?
2000 Harley Davidson FLHTCUI Electra Glide Ultra Classic Logo

1,538 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...