Question about Harley Davidson FLHTCUI Electra Glide Ultra Classic Motorcycles

1 Answer

I have purchased a Billet Gerotor Oil Pump Kit (V factor) and there were no installation/spec instructions included. Looked ALL over the internet, but could not find any. Help Please!

Posted by on

  • wd4ity
    wd4ity Sep 03, 2010

    Being the pump is a Gerotor pump, I'm assuming it's for a Twin Cam and it should install exactly like an original oil pump.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Harley Davidson Master
  • 43,738 Answers

Hi Harleydonny, it's too bad you can't find the very first and best tool you ever bought for your Harley Davidson. Despair not, for a mere $6.50 you may be able to download another one from the website below and good luck. Harley Davidson Manuals Mark Workshop Cam Replacement on Harley Davidson Twin Cam including Pushrod Removal...

Posted on Jun 21, 2015


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Install crankshaft kit on 2004 hyundai sonata 6 cylinder 2.7l engine

Really need more information...It sounds like they didn't give you a complete gasket kit...You will have to remove and re-install other components just to be able to see the crank shaft....You need the front and rear oil seal for the crank..,Oil pan gasket..,exhaust will have to be removed also...etc.......NEED MORE INFO..

Jan 24, 2015 | Hyundai Motor 2004 Sonata

2 Answers

Oil leaks on left side of oil pump

did you use a sealant on the gasket?????? ive also seen the cam seals leak on all the subarus ive worked on

Oct 16, 2008 | 1997 Subaru Legacy

1 Answer

Unexplained loss of coolant

Hi. Assuming you have looked very carefully around the system for obvious external leaks there are a few possibilities. You may have a headgasket problem and they aren't always obvious in performance but good indicators include a grey sludge in the coolant system or oil filler cap ( you will often get a little sludge in oil cap from condensation), you can buy a head gasket test kit for around £35.00 from a motor factors to help prove a point, they are easy to use and have instructions with them. I have also had heater matrix leaks inside the vehicle that would cause damp carpets or puddles not caused by air con under the vehicle from the air con drain tubes - again air con will cause clean puddles of water under the car when its been running but your anti freeze will be coloured and have that sweet smell. Jon

Jan 15, 2014 | 2002 Ford Ranger - XLT - Fender Flares -...

1 Answer

I just bought a 91 Honda accord, and the factory stereo was missing so I went out and bought the stereo installation kit also a new stereo but don't know how to mount without mounting brackets looked...

If you purchased an installation kit it should include universal mounting brackets. Perhaps you do not have an installation kit for installing your new stereo in your Accord. The kits are designed for installation of certain stereos in an Accord; not every model

Feb 24, 2013 | Cars & Trucks

1 Answer

Oil pump ridgid 1224

cant remember if this is the valve and spring type or gerotor (gear) pump but before disassembly try forcing air through with a hose then priming the pump again, run it in reverse then forward again
if that doesnt do it there are kits for each

Jul 05, 2012 | Ridgid 26092 1224 Threading Machine

2 Answers

Where is the oil pump located on a 2007 Volkswagon Jetta

its located inside the engine there is an oil tank type under the engine with about 15 to 20 bolts this is called sump you have to remove it to get to the oil pum But dont try this at home its a technicians job

Feb 02, 2011 | 2007 Volkswagen Jetta 2.5 Sedan

1 Answer

I bought a billet alloy alternator bracket for 65 windsor 302 i need instructions to install or drawing

if you look on youtube under ..march performance ford billet pulleys.. you will see one set up the triangular bracket bolts to the side of water pump for base mount on alternator ,bolt then goes through bracket, through alternator, though spacer and threads into lower hole on the head... adjustable brace then bolts to centre top of water pump and top of alternator youtube clip shows setup clearly hope this helps

Jan 10, 2011 | Ford Mustang Cars & Trucks

1 Answer

Just purchased vehicle and don't have an owners manuel for maintaince specs.

Haynes manual 24071 covers the new style S-10, Sonoma, Blazer and Jimmy. It will give you all specs for the motor, transmission, and any other options. I have a '91 S-10 and a '96 Jimmy. All specs from Oil Type, Transmission fluid type, and the weight of gear oil needed are included. It also offers step by step instructions on how to perform most repairs and tourque specs on almost all bolts. Good luck and wise choice on vehicles.

Feb 03, 2010 | 2001 Chevrolet S-10

1 Answer

Low oil pressure at rocker box

The Ironhead Sportys have a tendency to do this when the Gerotor Gear Set is worn. These are the thin set of drive gears in the oil pump. HD Part # 26492-75. Do you have a problem WET SUMPING? This is when the oil drains from the reservoir into the crank case if the bike sits for a period of time and when you attempt to start it pukes oil from the breather tube. If so you need to check these gears. Gerotor Gear Sets inner/outer clearance should be .000 the shaft should have a clearance of .0005 and the feed gear height in the pump should be .011. Normal operating pressure when hot should be 4 psi at idle and 10-20 psi at 3500 rpm. The pumps generally have issues before the rocker bushings.

Apr 17, 2009 | 1979 Harley Davidson XLS 1000

1 Answer

Oil Leaks

I did an engine swap because of a rod knock and when I removed the power steering pump the seal was upset and would not seal again. I found a guy on the internet who had a kit for under $75 shipping included (sorry can't remember sight name). This kit comes with a new improved two lip seal, couple o-rings, gasket, home made tools, and a video showing how to install the new seals. I installed the kit and it fixed the leak in about 3 hours. The dodge dealer wants $1100.00 for a rebuilt vacumme pump. Do a google for power steering leak.This is a very common problem even for a pump that has not been removed.

Feb 07, 2009 | 2001 Dodge Ram 2500 Truck

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers


Level 3 Expert

4340 Answers


Level 3 Expert

76846 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides