Question about 1998 Honda CA 125 Rebel

Open Question

Crank seal leaking - 1998 Honda CA 125 Rebel

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 5.7LG IS one pc.seal crank flange and the 305 is two pc.rear seal crank flange


el camino rear engine seal

two different motors

one piece round seal held in a casing

the two part rear seal
the proper way to do the job
the crank has to be removed

fitting it with the crank in
and turning the crank to fit such a seal
it may no last long and leak again

Nov 23, 2016 | Cars & Trucks

1 Answer

Peugeot 207 1.4, small oil leak from underneath, added engine stop leak, how long before it stops leak?


oil leaks from underneath can come from front crank shaft seal --rear crank shaft seal --oil filter--sump gasket---power steering ---leaking rocker cover gaskets ---leaking oil pressure switch.--transmission seals. I suggest that you have the engine professionally cleaned and then put it on a hoist while running to see where the oil is from

May 14, 2014 | 2007 Peugeot 207 1.4

1 Answer

I've a 99 protege replaced the rear main seal in, and leaks again , I was told that the crank was worn and that's what caused it to leak again could this be true or am I getting scamed


unlikley as its only the rubber that touches the crank shaft on any car but it could be warped moving the seal and letting oil out more likeley if its still leaking did the garage do it it may be that the seal was rubbish they put in and are trying to get more money out of you for the sake of another seal was it genuin parts of aftermarket parts as some times that makes a masive difference hope this helps

Sep 24, 2012 | Cars & Trucks

1 Answer

The Dodge Dealer is saying the crank seal and cam seal are leaking when they went to change the oil, are these transmission seals or engine seals? do I need to place them or is there a product that will...


Crank seal could either be at the front or rear of the engine (there are two) Cam seal is at the front of the cylinder head. If the leaks are minor, a good product that may help is lucas conditioner and sealer. Larger leaks require an actual seal replacement. No sealer will work immediately. The reason most leak is because over time the seal hardens from heat. It takes a while to soften it up again.
If the leak is from the rear main seal, the transmission needs to be removed to get to it but neither seal is part of the transmission.

May 21, 2011 | 2000 Dodge Caravan

1 Answer

Oil leak-coming from cover for timimg belt


Hello I am a Guru from Fixya,I will answer your question,You have three seal behind the timing cover you have 2 cam seal that could be leaking and a crank seal.You replace them seals and I am sure you will stop your oil leak.It is a pretty good job to get into.You have to take the motor mount off out of the way ,take the cover off out of the way,take the timing belt off out of the way and make sure you have all your timing marks alined before taking the timing belt off,You have to take both timing gears off out of the way and then you can see the camshaft seal to replace and then take the timing gear off the crank and then you can see the seal on the crank to replace and then put it all back togeather. and your oil leak is cured.

Jan 31, 2011 | 1995 Toyota Camry

1 Answer

1988-1993 ford festiva leaking oil around the crank pulley... could the oil be coming out of timing chain seal... are could it be a the seal on the crank shaft.. if so would i need to removle the engine to...


This sounds like the crank seal, the engine doesnt have to be removed, in order to get to seal is like replacing the ttiming belt, and once in the timing belt i would replace the crank and cam seals, also do the timing belt, and maybe the waterpump, you will need to remove the crank pulley and then the timing covers then align timing marks for timing belt before ou remove it, with timing belt off the crank pulley then slides off the crankshaft and the seal is behind it, the cam shaft gear unbolts and the seal is behind the gear, once the gears are off then you will be able to remove the seals from the engine,heres a few diagrams to help. good luck and i hope this is helpful,60d826b.gifca916fa.gifcb2cb5a.gif

Oct 31, 2010 | 1993 Ford Festiva

1 Answer

My 1969 ts 250 is burning crank case oil. Must be the crankshaft seal is out? Can I replce the seal without spliting the crankcase joint?


If your motorcycle is burning oil this indicates worn top end components. A leaking crank shaft seal would be leaking onto the ground. Yes you can replace the seal without splitting the cases, with the right tools.

Jan 04, 2010 | Suzuki ST 250 Motorcycles

1 Answer

Oil leak from crank shaft by harmonic balancer on


remove balancer and replace crank seal

Mar 09, 2009 | 1999 Suzuki Vitara

1 Answer

Power steering leak


The Crank Seal is Part of the Motor Not the Power Steering Pump. You can take your Truck to the Car wash and Clean the Motor Really well While RUNNING. And then just Drive home. You will be able to see exactly where the Leak is Coming From. Please Rate My Response! Thanks!

Feb 01, 2009 | 2002 Nissan Sentra

Not finding what you are looking for?
1998 Honda CA 125 Rebel Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...