Question about Harley Davidson FLHX Street Glide Motorcycles

2 Answers

PSI gauge at 65 all the time. Should I see a engine light come on or some kind of indication that I have a problem?

Posted by on

  • lemonsl77 Sep 02, 2010

    so how long can i ride with the oil pressure high before i have a major problem?

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 4,070 Answers

Hi! The pressure gauge may not give you warning. So If anything is unusual don't rely on the service light. Hope this helps and thank you for using FixYa!

Posted on Sep 02, 2010

  • dj_relly999
    dj_relly999 Sep 02, 2010

    If it reaches 70 beware. This will give too much stress to the engine and will surely create damage.

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Expert
  • 2,973 Answers

It is supposed to be Low Oil Pressure warning/indicator. If the pressure is enough or more it will not indicate, although more pressure is also a problem. So, a visit to the mechanic is called for.

Posted on Sep 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will not start first try but will start


If the engine starts and run good on second or third time. Install fuel pressure gauge and run the engine for a wile and turn OFF. the fuel on running engine will be 60-65 PSI. After 5 min. will drop to 40 PSI.If continue to drop to 0 PSI suspect fuel pressure regulator or fuel pump.

Apr 07, 2014 | Cadillac DeVille Cars & Trucks

1 Answer

I have a 98 gmc 2500, w/ 454 engine.. Recently the engine was making some major noise so I took off the valve covers to find that the pushrods were very loose. I then dissected the truck taking off the...


Engine Cranks But Will Not Start Basic Checks:
A. Test Fuses. Test both under hood power distribution center and the fuse panel under dash. This is done with a test light tool. The test light should illuminate on both sides of the fuse, if not the fuse has failed and needs to be replaced.

B. Testing Fuel Pressure Test for proper fuel pressure with a test gauge on the fuel rail, most throttle body injection cars (TBI) are between 13 psi and 17 psi. and most (DPI) direct port inject systems are between 40 psi and 55 psi. If no or little fuel pressure is observed and there is 12 volt power present the fuel pump, the fuel pump needs replacing.

C. Checking Timing Belt Test for compression by removing a spark plug and insert a compression gauge. Crank the engine over about 5 seconds the gauge should read between 125 psi and 165 psi, if no compression is observed remove front engine cover to inspect timing belt or chain. Crank engine to observe cam rotation, if the cam does not rotate the timing belt or chain has failed. (note: if the timing belt drives the water pump it is best to replace the water pump at this time)

D. Test for Injector Pulse Remove injector connector to insert injector test light (node) or volt meter. Observe light flash or gauge pulse while cranking. If light/voltmeter doesn't respond, an ignition distributor/crank angle sensor (CKS) or an ignition module is most likely your problem.

E. Test for Ignition Spark Remove spark plug wire, insert an extra spark plug into end of wire, rest spark plug next to a ground source then crank engine. You should observe a blue spark between the spark plug gap and ground source. If no spark is observed, an ignition coil, ignition rotor or spark plug wires might have failed. (always keep hands away from engine when cranking)


The ENGINE CROSS-SECTION below (typical 'V-8' ENGINE) shows all main ENGINE components and indicates the exact location of the most HEAT DAMAGE PRONE PARTS - THE HEAD GASKETS.
ce53170.jpg

Jul 18, 2008 | GMC Sierra 2500 Cars & Trucks

1 Answer

2005 Lincoln Town Car suffering from low fuel pressure, I have Changed Fuel Rail pressure sensor, Fuel Pump driver, the fuel pump in the tank and the fuel filter but it is still showing only 26 psi fuel...


The ford spec listed in the ford engine control manual is:

General Specifications Item Specification Fuel tank capacity 71.9L (19 gal) Fuel Pressure Hot restart 448-482 kPa (65-70 psi) Key ON Engine OFF (KOEO) 140-415 kPa (20-60 psi) Key ON Engine Running (KOER) 170-280 kPa (25-40 psi)

Are you measuring the fuel pressure with a mechanical gauge or are you using a scan tool . If with a mechanical gauge, does the gauge have an air purge? What symptoms does the vehicle present. If running rough you could have a fuel injector leaking. Are you measuring the fuel pressure with the key on engine off? If so, did you cycle the key a few times? Good luck

Apr 05, 2011 | 2005 Lincoln Town Car

1 Answer

My 2001 accent (automatic) sputters and stalls, some times just sitting sometimes during braking, once while driving. No Engine light or codes. Changed plugs, wires, PCV, Oil, oil filter, air and fuel...


if the pump pressure is within the specifications ( 45-65 psi) it will sat in those specification driving or stationary
a vacuum brake booster will cause the problems if it has a diaphragm leak when the brakes are activated but will not show as a code
vacuum leaks from vent controls , transmission actuator lines or unit will also cause the problem and again will not show as a code

Apr 17, 2017 | 2001 Hyundai Accent

1 Answer

While driving the oil pressure gauge sits between 60 and 65 psi but when i get on the gas it shoots up to 80 psi. When idling it sits on 40 psi.


When the engine is idling, the oil pressure is reduced. At fast idle (such as highway speed) it in increases. This is considered normal. If it goes higher than 80 or lower than 40...have it checked out.

Feb 15, 2010 | 2001 Chevrolet Silverado 2500HD

1 Answer

What is the check gauges light


CHECK GAGES light (1) indicates a potential engine failure(low oil pressure, low coolant, coolant overheating) has occurred.
· Check gages and shut down engine. Gages should read as follows: Oil pressure 5 to 10 psi (34 to 69 kPa) at idle; Water Temp gage below 230 degrees (110 C).
· Check engine oil level (Para 2-11) if OIL PRESS gage indicates low reading. Check coolant level (Para 2-11) if Water Temp gage indicates high reading. Notify Unit Maintenance if levels are low.

If CHECK ENGINE light (2) is on, check engine oil pressure gage (3) and water temperature gage (4). If both indicate normal, proceed with mission and then notify Unit Maintenance. If either one does not indicate normal, stop engine immediately and notify Unit Maintenance


Oct 16, 2009 | 1999 GMC Jimmy

2 Answers

Wont crank unless u spray starter fluid in. Cleaned air flow sensors. runs fine as long as u hold down the gas. No idling.


Check The Fuel Filter And Your Fuel Pump Its The Problem %99 Of The Time.
Sincerely,
Michael Scott

Jul 24, 2009 | 1994 Chevrolet S-10 Blazer

1 Answer

Oil level gauge


that sounds like its not a oil level gauge at all. it sounds like a oil psi indicator. when you accelerate your oil psi increases. same when the engine is cold. this is a normal thing that trucks and every vehicle for that matter do. my truck has a oil psi indicator and it does exactly what yours does.

Oct 15, 2008 | 2003 Toyota Tundra

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...