Question about Ducati Multistrada 1000 DS Motorcycles

1 Answer

Rear wheel locating pins are sheering. - Multistrada 1000 DS Ducati Motorcycles

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ducati Master
  • 41,796 Answers

Hi, Hraatgever for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary, transport your bike to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your problem. For more information about your issue and valuable free downloads that you will need please visit the websites below. Good luck and have a nice day.
Gear that survived failed blew up protected you etc etc
PDF Moto Manual
Ducati OEM Parts Fiche Lookup and Online Ordering
http://www.corsa-jp.com/ducati/service/owners_manual/2004_model/04_multi1000.pdf
Ducati Multistrada 1000 DS 2004

Posted on Feb 13, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Snow blower will not start


sheer pin on flywheel sheered off pull flywheel and replace sheer key

Feb 23, 2014 | Troy Garden

1 Answer

I have a Cub Cadet LT 1042 and the steering wheel just goes round and round.


This sounds similar to the wheel on the bus....<giggle> Well, what you do is look at each part downstream of the steering wheel. Eventually, you will find one part moves and one does not, and that is the area you need to investigate. Often a sheer pin gets sheered.

Jun 03, 2011 | Cub Cadet Garden

2 Answers

Kohler engine backfires but does not run


sheer pin on engine shaft is busted. take off the fly wheel and look inside or on the shaft.

Sep 04, 2010 | Craftsman 17.5 hp 42 in. Deck Lawn Tractor...

1 Answer

I have a Yard Machine mower (High Wheel rear bagger / mulcher). When running, the engine ''hunts''. Have changed the spark plug and put in new air filter. Also replaced the sheer pin (was half sheered)....


yap! and also clean the carburator by removing the bowl, check the nidle or change. parts are available to sears warehouse. You can check also the flooter if there is a hole, by rattling if gas are present inside, if so, make small hole .

Aug 29, 2009 | Garden

1 Answer

Does the gx 340 have a timing belt. I have a honda 1011 riding mower that backfires when trying to start, the fly wheel sheer pin is ok.


What engine do you have ? Some have a selonoid on bottom of bowl of carburetor if bad can cause your problem.

May 12, 2009 | Garden

1 Answer

My poulan snow blower keeps breaking sheer pins in the wheels,


1)try replacing them with a heavy duty "roll-pin"
these are available from auto parts stores.
two types are available.
first is the "single-roll",second is the"multi-rolled"with many layers to it.

try both they're cheap.

2)try not hitting things with the blades
3)dont force the machine in heavy wet ,or frozen icy packed snow.

Dec 23, 2008 | Sport & Outdoor - Others

1 Answer

Volvo s60-2.4 D5 2001


Its most likely your siren module.

It is located in the right fender well just behind the wheel liner.

Remove the R/F wheel, remove the torx 25 screws, pull the liner to the rear and you can see it right there above the liner.

To remove the siren module...it uses a sheer bolt, which unfortunately you'd need to either drill it out, or use a dremel to slice a slot to get a screw driver in to remove the sheer bolt.

Jul 23, 2008 | 2001 Volvo S60

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ducati Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

bobkoure

Level 1 Expert

36 Answers

yadayada
yadayada

Level 3 Expert

76132 Answers

Are you a Ducati Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...