Question about Harley Davidson FXDCI Dyna Super Glide Custom Motorcycles

1 Answer

Cannot get battery out of surrounding casing. Can you help?

Posted by on

  • 5 more comments 
  • wd4ity
    wd4ity Aug 31, 2010

    What model and year bike?

  • doug_wintle Sep 01, 2010

    It's a 2005 Harley Davidson FXDC

  • wd4ity
    wd4ity Sep 01, 2010

    Sorry, I don't think I've ever seen an FXDC. My speciality is 1999 or earlier. Maybe someone else is on here that can help. If it's one of the dyna series bikes, loose the two screws to the rear of the battery tray. Remove the seat and look down behind the battery, there is a jack bolt. Turn the bolt counter clockwise and the battery will lower allowing you to remove the battery cover and surround. That is IF it's a dyna series bike.

  • electraglyde Sep 02, 2010

    What model Harley?

  • doug_wintle Sep 02, 2010

    2005 FXDC Dyna Superglide custom

  • electraglyde Sep 02, 2010

    It's a Dyna or Wide Glide, correct? Battery box on the side?

  • doug_wintle Sep 03, 2010

    It's a Dyna super glide. the battery is under the seat. I have the seat off but can't find any nuts, screwes or bolts to take the battery cover off. I need to get to the battery terminals.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,565 Answers

On the older models, there were two bolts back towards the rear wheel from the battery. Loosen the two bolts to the rear of the battery tray. Remove the seat and look down behind the battery, there is a jack bolt. Turn the bolt counter clockwise and the battery will lower allowing you to remove the battery cover and surround.

Posted on Sep 03, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I drop my iphone 4 in the sink

First of all: Don't try to charge it or turn it on unless you're sure all the water has come out. You write it's gotten hot. That means the battery discharged very rapidly du to the water inside the iPhone. It might be the battery or surrounding circuits have been damaged by this, but first let's get the water out.

Put your iPhone in a closed container filled with rice (uncooked! fresh from the store). Rice is (like salt) pulling all water from it's surrounding. Don't use salt as salt can lead to heavy corrosion.
It's a good idea to open the SIM tray.

If you keep this jar/box in a warm place for several days all water will evaporate from the iPhone case into the rice. After that you shouldn't see any traces of humidity left on the iPhone. If unsure leave the iPhone with the rice for a few days more.

Plug the charger in and wait a few minutes to see if the charging indicator shows up or the iPhone starts. Be prepared to pull the plug in case the iPhone gets host very fast. Good Luck.

Mar 11, 2014 | Apple iPhone4 4G iPhone 4

1 Answer

TC-P50GT25 Viera has no audio out put.I need to connect surround sound.

In that case all you can do is connect each device you're connecting to the television to the surround sound. You would connect the device to the television for video only and connect the sound cables to the surround sound. You may also be able to connect the devices directly to the surround sound (video and audio) and then connect it to one of the television's inputs.

May 07, 2011 | Panasonic VIERA TH-65PV500 65 in. Plasma...

1 Answer

I can't figure how to change the battery on this hardcase lantern took off the rubber surrounding the lantern face, but nothing else seems to come off without unscrewing, But seems like those sre rivits...

I've owned this flashlight for years. In the comment above, ignore the instruction to remove the rubber casing around the lamp area. Simply grasp the whole front of the lamp piece (including the rubber cover), and twist in a counter-clockwise direction to remove. Then squeeze together the two black tabs and pull the battery compartment out to replace the batteries.

Apr 05, 2011 | Energizer Eveready TUF4D1E 4D Cell Lantern

1 Answer

How do u get surround sound out of all the speakers when watchen tv

Most of the time, you will only get surround sound out of all the speakers when the Soure (ie Cable, Satellite etc.) puts out surround sound. The receiver can only give what it gets (unless it has a simulated surround function, in which case it wouldn't be true surround sound). If you can check the info from the source, see if it shows you Dolby 5.1 or DTS as an option. If these aren't available, then you won't get surround sound. Hope this helps!

Mar 01, 2011 | Samsung HTC550 Theater System

1 Answer

The batteries keep popping out when I open the case.

Your battery door or surrounding casing is broken. It's a common problem with this model (especially for units with the side battery door). Unfortunately, your only options are to tape the door shut or get a new calculator. If only the door, and not the casing, is broken you can try to find just the battery door.

Feb 15, 2010 | HP 19bII Calculator

1 Answer

Backout problem with the lcd, dell

hi, it sounds like the backlight inverter is failing. you will need to remove the screen surround to acess it . make sure you remove all power and battery before atempting. its not too difficult a job to attempt. remove any rubber bumpers around the screen to reveal the screws holding the surround in place, remove the screws then you will need to clip out the surround taking care not to damage your screen. when the surround is off this should expose the backlight inverter a small circuit board about 10-15cm long there are wires attached either end its simply a case of removing the wires and replacing the inverter. putting back together is simply a reversal of the dismantling proceedure.
hope this helps

Feb 22, 2009 | Dell Inspiron 1000 Notebook

1 Answer

Replace battery how do you open n60i

There are two small screws on the bottom of the case. Remove these and pry open from the bottom carefully. Note that yhe case surrounds the USB jack so take care with that side of the case when opening. The speaker is on the back part of the case and is connected to the motherboard. As you remove the back make sure to disconnect the cable before you pull far and tear the connector - it's small.

Sep 02, 2008 | Navman NavPix N60i GPS Receiver

2 Answers


Yes i own 1 myself and have replaced the case 5-6 times , so here you go :
First you will need a t7 torx screwdriver , and then you remove the screws ( you can find the 2 screws were the battery is )
Once you remove them you can now take the rest of the case of BUT  , you might need a case opening tool for the part just above the battery , after that youve done it except for where the keypad is , replace the keypad and the chrome surrounding the screen you can simply take it off , Hope i helped :D

Oct 18, 2007 | Nokia 6233 Cellular Phone

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4818 Answers


Level 3 Expert

4348 Answers


Level 3 Expert

78919 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides