Question about 2000 Harley Davidson FLHR-FLHRI Road king
Both my throttle cables snapped on my 1998 road ? why both at the same time and are they easy to replace on fuel injected model as do not have manual.
Posted on Mar 16, 2011
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
On a Big Twin, you must pull the entire primary drive off the engine.
Disconnect the battery. Take the outer primary cover off the engine. Remove the compensator (engine sprocket) nut. This nut is very tight and has Loctite thread locker on it. 150-165 foot pounds of torque. You'll need to something to lock the chain up so the engine does not turn while loosening or tightening this nut. We use what is called a "locking bar". Remove the small plate with the screw and locknut in the center of the clutch assembly. Remove the mainshaft nut up inside the clutch assembly. It torques to 60-80 foot pounds LEFT HANDED TREADS. Remove the nut from the primary chain tensioner. Grab the compensator sprocket and the clutch assembly and lift the primary drive out of the cover.
Take the small screw out of the center of the jackshaft and remove the starter jackshaft.
From the right side of the bike, remove whatever you have to remove to get to the starter, exhaust pipes or whatever. Disconnect the battery cable and the small wire from the starter. Remove the two bolts holding the starter on inner primary cover.
Go back to the left side of the bike. Remove the four bolts that holds the inner primary to the engine, and the two that hold the primary to the transmission. There's one bolt coming in from the backside that has a braided wire on it on the early models. There may be four bolts holding the inner primary onto the transmission. When you have all the bolts out, the primary will come off easily. If it does not seem to want to come off, you may still have a bolt somewhere. Do not beat on the primary cover with even a rubber hammer. It should come right off.
Now, you'll have to remove the rear wheel, rear shocks, belt guards, and remove the swing arm.
As you can see, it's a pretty involved job on a Big Twin.
Posted on Jul 27, 2010
No the box fuse's is underneath the seat near to the Batt in a black box,then remove the cap and check for a burn fuse...
Posted on May 24, 2011
Tips for a great answer:
Sep 27, 2015 | Motorcycles
Sep 09, 2015 | 2011 Harley Davidson Road King Base
Mar 01, 2013 | Harley Davidson Motorcycles
Dec 02, 2012 | 2000 Harley Davidson FLHR-FLHRI Road king
Nov 11, 2012 | 2000 Harley Davidson FLHR-FLHRI Road king
May 31, 2012 | 2005 Harley Davidson FLHRS - FLHRSI Road...
May 01, 2012 | 2003 Harley Davidson FLHRCI Road King...
Mar 15, 2012 | 2005 Harley Davidson FLHRS - FLHRSI Road...
Jul 17, 2010 | 2002 Harley Davidson FLHR - FLHRCI Road...
May 26, 2010 | 2002 Harley Davidson FLHR - FLHRCI Road...
535 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: