Question about 2002 Yamaha TW 200
Hi, Gersonj01 for more information about your question and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Wiring diagram for Yamaha TW200 Google Search
Yamaha TW200 Wiring Diagram
YAMAHA TW200E Owner Manual
OEM parts for Yamaha
Yamaha TW200 Service Manual
Posted on Nov 28, 2016
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There are two seat bolts under the seat that must be removed. Obviously, if the underside of the fender is covered in mud, you'll have to clean it first. A metric socket works best to remove the bolts.
After removal of the seat bolts, lift the back of the seat, then pull straight back; a plastic flange on the front of the seat hooks under the tank, and so you have to pull it backwards to remove it.
With the seat off, removing the battery is pretty easy. A rubber strap holds the battery down; unhook and remove it. Unscrew the lead wires and unhook them (negative first), then pull the battery out.
Install a replacement battery by reversing these steps. Yamaha recommends charging a new battery before installing it.
Posted on May 27, 2009
SOURCE: yamaha tw 125
The noise you hear is valve clatter. You should not adjust your timing chain. Instead get a manual and find the vlave clearances for that bike. (Ex. The exaughst valve may be .006" and the intake valve may be .004") Then you'll need a feeler gauge, and to do this you'll remove the valve covers and get the engine to TDC (Top Dead Center) This is where the piston is at the very top of it's stroke and both valves are shut. (compression stroke) You must then loosen the rocker arm nut to the point that you can insert the feeler gauge between the rocker arm and the top of the valve run the nut down tight to the feeler gauge and then pull gauge out and repeat on the other valve.
Posted on Aug 24, 2009
Remove the side cover that the is hiding behind. The pessure plate is like a car, held on by bolts on its perimeter. Remove the pressure plate and the disc can be remove. Remember the first dis is fiber, the next is metal and on and on. You should end with a fiber against the flywheel. Note how the notches on the tangs are arranged. facing out or facing in, aligned or staggared. Soake the fiber disd in motor cycle motor oil for an hour before assembly. If there is an alen screw with a lock nut in the center of the pressure plat, that is a pusrod and will need adjusting after assembly and before the side cover is put on. If so, let me know. Good LKuck,Ned
Posted on Nov 12, 2009
I have a tw200 and when I have this problem its from the cam chain slipping back a notch when I unload it from my truck. I leave it in gear so when I let off the cluch it acts as a brake. I ride by my self so thats why I load it that way. I am guessing you load and unload your tw the same way. So remove the timing cover and make sure you are tdc on both the upper and lower timing marks. The bike will run if the timming is off a bit. It's really easy to set the timing on these bikes. It's easier to look for how to on the xt 200 if you need more help.
Posted on Jan 07, 2010
the battery is seated right below the seat, remove the seat, expose the battery, pull the rubber bracket off, and there you go, battery is loose.
Posted on Apr 13, 2010
Tips for a great answer:
Apr 24, 2017 | 2004 Yamaha TW 125
Feb 08, 2014 | 2000 Yamaha DT 125 R
Jan 07, 2014 | Yamaha Motorcycles
Dec 06, 2013 | Yamaha Motorcycles
Jul 31, 2013 | 2001 Yamaha TW 200
Mar 02, 2013 | Yamaha Motorcycles
Jun 02, 2012 | 2002 Yamaha TW 200
Jan 13, 2012 | 2001 Yamaha TW 200
Jul 22, 2010 | 2005 Yamaha TW 200
May 01, 2010 | 2001 Yamaha TW 200
102 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: