Question about 2005 Yamaha TT-R 125 L

1 Answer

I just bought my kid a TTR50, its and 09 and looks brand new. It has been running great, until I sprayed it off with a garden hose, now it won't fire. I checked the plug, no spark. Anyone had any issues with this? It is electric start.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 42 Answers

Use starter fluid to spray out the electrical connections to the coil and starter switch, and let dry before reconnecting, or just wait for it to dry out naturally. Next time, be very careful not to spray electrical wiring. If none of this helps, you may have fried the coil. Although these connections should be waterproof, time kills all.

Posted on Aug 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Something must be clogged because the water wont flow into the machine and sprays around the top of the hose end at the washer. I checked the little filter under the hose and its clean.


There should be lights blinking, indicating a fault.
If this unit is brand new call warranty service.
If this unit has run in the past you will need either a new intake valve or new computer sequencer board.

Dec 04, 2012 | Haier HLP21E Top Load Washer

1 Answer

My hover extract deep cleaner won't spray water or cleaning solution


If you have the receipt from when you bought it, take it to the closest Hoover warranty center and they will fix it under the warranty at no cost to you.

Jun 11, 2017 | Hoover F7431-900 SteamVac Vacuum

1 Answer

Orbit traveling won't move


I just had the same thing happen to me. You have to turn the arms counter clockwise...opposite of the tightening bolts, and have them pointing in opposite directions to get it to turn. If the unit moves backwards, turn them another 180deg to the opposite directions, and it should go forward.

May 28, 2012 | Garden

1 Answer

Won't move brand new sprinkler


Hi, That is typically caused by too small of a hose or not enough water pressure...

Here is a tip about how to get parts foryour traveling lawn sprinkler and also a great article about how traveling lawn sprinklers work.

TravelingLawn Sprinklers

heatman101

Jun 14, 2011 | John Deere Gilmour Traveling Sprinkler -...

1 Answer

I bought a Husqvarna YTH2348 this past summer (may 2010). It ran great until this fall when I got some bad gas. One spark plug fouled out so I installed new ones. I ran it for a while then checked the...


I would start by switching plugs. Then does the wet warm one get hot and does the hot one now stay only warm. If the same plug stays wet, replace it.
If the same cylinder is not firing, check the wiring to the plug. Check the coil wiring and coil for spark to that cylinder.

Nov 30, 2010 | Husqvarna Garden

1 Answer

My backpack blower won;t start. I replaced the spark plug and it still won't start. Can you make a suggestion?


Check and make sure the rubber hoses coming out of the fuel tank are not broken and look inside also if not that carb is cloggged up maybe pull the fuel hose off and spray some gumout up into it to open up the jet, spray some gumout in the carb and see if you get a sputter out of it then you know your not getting any fuel.. carb needs cleaning

Oct 03, 2010 | Husqvarna Forest & Garden 125bt Backpack...

2 Answers

Coolant does not seem to be circulating in radiator(94 z28 camaro). The radiator is brand new and it seems not to flow even without the thermastat on. I hate to think it is the water pump again, since the...


Remove the thermostat and run the car. Without the thermostat you should see FULL flow thru the radiator. You can pull the top radiator hose WHERE IT ATTACHES TO THE RADIATOR and start the engine with a garden hose stuck in the filler opening. Don't turn the hose on so hard that it blows water out the radiator hose. You want to water pump to shoot water out the disconnected hose, not the garden hose. A hose COULD be blocked, but it would have to be a pretty big blockage to cut off all flow. Not likely in my opinion. You could take them off and look in them and the heater hoses too. You can blow compressed air thru the heater core to see if it is blocked. As for it being the water pump...they rarely break so bad they won't pump water. Usually the seal goes bad and they leak water out the shaft. Look around, I kinda think you have a bad thermostat. Stuck closed. Drop it in boiling water and see if it opens. You didn't say what engine is in the Camaro, but most of them have a small bypass hose on the top of the water pump running to the intake manifold. Pull it off and see if water sprays out when the engine is running.

Oct 10, 2009 | 1996 Chevrolet Camaro

2 Answers

I'AM LOOKING FOR A DIAGRAM OF THE COOLING SYSTEM; SO I CAN DISCONNECT THE HEATER HOSE AND USE A WATER HOSE TO RUN THROUGH IT TO SEE IF ANY DEBRIS ARE TRAPPED BLOCKING WATER FLOW


This is how I flush the heater core...go to the garden department at Wal-Mart and get a 5/8 - 3/4" female garden hose connector similar to my picture...remove the upper heater core hose and connect your garden hose to the connector then to the heater hose and secure with a hose clamp. Remove the lower heaer core hose and point it to the gound, then turn on your faucet and run clean water thru it... b67bfc8.jpg

Mar 24, 2009 | 2001 Chevrolet Venture

1 Answer

Water fill, discharge and noise problems


to reset the water level you have to turn the knob all the way over as far as it will go and then come back to large load.

Feb 18, 2009 | Maytag Atlantis MAV6000 Top Load Washer

Not finding what you are looking for?
2005 Yamaha TT-R 125 L Logo

183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...