Question about 2008 kawasaki Ninja 250R

2 Answers

2008 kaw. Ninja 250r. Stops at idle sometimes, like key is turned off. Horn may not work, then it will work. tonight, from low to high to low beam, light worked but tail light quit working and instruments lights quit and then all came on and all worked properly. Just got this 08 ninja 250r. Always has started and not stranded me. When we got bike, didn't know cooling fan fuse was bown, replaced fuse and it has been working fine for a week now. 4000 mi. and runs great and completely stock. Thanks

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • kawasaki Master
  • 4,514 Answers

U must go thru the wiring harness to look for flaws-cud be somethin loose or open from vibration--get a clymer manual

Posted on Aug 30, 2010

Testimonial: "Thanks, I'll get the clymer's manual and start having fun. "

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Had the same problem, check all the fuses, and make sure they are all seated right

Posted on Mar 21, 2013

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do i perform an oil change on my kawasaki ninja 250R?

Jul 13, 2010 | 2008 kawasaki Ninja 250R

1 Answer

Kawasaki Ninja 250 running problem

This could be due to timing screw being incorrectly set
Locate gold timing screw on the carbrettta turn it clockwise only slightly till bike idles without choke on, Then when choke it on it should idle a touch higher.

Jun 21, 2010 | 2008 kawasaki Ninja 250R

1 Answer

2008 Ninja 250R: the gas tank "sings" when the pressure builds up. ...

usually from the vent or the seal. it's a common occurense on many bike. best thing to do is not park in direct sunlight.

May 18, 2010 | 2008 kawasaki Ninja 250R

1 Answer

Lost my key for my 2008 kawasaki ninja 250. No Key code or spare. Dde is located? o you know where the key co

1. Tell your dealer your Chassis No. for key replacement in their file
2. Try your local locksmith to make a duplicate
3. Replace the whole ignition key cylinder.
Good luck

Apr 12, 2010 | 2008 kawasaki Ninja 250R

2 Answers

2008 Ninja 250r Wont start it just sits there and cranks it only has 654 miles on it any suggestions? thanks

Pull the spark plug and squirt some gas in the cylinder, put the plug back in and get the juices flowing. Sometimes the fuel pump goes dry and needs to be primed, the crank alone won't do it, it needs some umph! Hope this helps.

Mar 21, 2010 | 2008 kawasaki Ninja 250R

1 Answer

Every wire is unplugged on my kawasaki ninja X7

May I suggest a trip to your local library. Cycle repair books should be in 646 stacks of reference. Otherwise, go to your Kaw dealer and pay their price for one that covers your bike. You'll still pay less than if you paid them to rewire it...and you'll learn something.

Oct 06, 2009 | 2008 kawasaki Ninja 250R

1 Answer

Need help

if its the right key, then use picks to extract the key piece, and have new one made. or find the largest red wire exiting the switch, apply power, may also be more than just this wire that needs power on some bikes.

Oct 04, 2009 | 2008 kawasaki Ninja 250R

1 Answer

How can i remove gas cap off a 2000 ninja 250r? i take the screws out but the cap dosn't come move.

Not sure what you are saying but you need to unlock the cap with the key as well. I think. Hope this helps.

Aug 13, 2009 | 2008 kawasaki Ninja 250R

1 Answer

Remove the tail

The assembly is bolted on. Depending on how much you want to modify it, there are fender eliminator kits available. Some are just license plate holders. Others are complete rear turn signal and bracket kits. Some have lights for the license plates, some do not. Do a search on the web. If you just don't like how the tail hangs down so low, consider just cutting the it off at the bottom, right below the plate to make it shorter. The reflector isn't necessary to have.

Nov 10, 2008 | 2008 kawasaki Ninja 250R

Not finding what you are looking for?
2008 kawasaki Ninja 250R Logo

415 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers


Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides