Question about 2002 Harley Davidson XL 1200 S Sportster Sport
Hi Thor_gierde, for more information about your question please visit the websites below. Good luck and have nice day.
Set Change Override Transport Harley Security Alarm PIN Code No Key Fob...
Posted on Jun 26, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
It does sound like your alarm is still on. try manually turning off the alarm. Please post theresults. Hope this helps.
Posted on Nov 09, 2009
First, check the "Run/Stop" switch on the right handlebar switch housing. Make sure it's in the "Run" position. If it is, your starter relay may not be working. The relay is exactly like those on your car, a one inch plastic cube. Now, where it's located, I'm not sure. It could be under the seat or behind either of the two side covers on your bike. Once you find it, turn the switch on, hold on to the relay, and push the start button. You should feel the relay click. If it does click but the starter does not engage, you need to test the voltage coming out of the relay.
To test the output of the relay, look at the end of your starter from the right side of your bike. You'll see a five sided plate on the end of the starter solenoid. At the top of the plate, you'll see a single wire plugged into the starter. Unplug the wire and stick a test light probe in the connector on the end of the wire. Again, turn the switch on and press the start button. If the light lights up, your relay is good. If not, the relay is probably bad.
To do a final test on the starter, remove the five sided plate by removing the three small bolts that secure it. You'll see a plunger inside the solenoid. Make sure the bike's transmission is in neutral. Using a large screwdriver, push the plunger into the starter solenoid. The starter should engage and turn the engine over regardless of whether the switch is "on" or "off". Make certain that you push the plunger all the way in. If the starter does not turn, you starter is bad.
Posted on Nov 24, 2010
Tips for a great answer:
Sep 08, 2015 | 1998 Nissan Altima
Mar 21, 2015 | 1996 Volkswagen Jetta
Feb 08, 2013 | 2007 Harley Davidson FLHX Street Glide
Mar 08, 2010 | 2004 Chevrolet TrailBlazer
Nov 09, 2009 | 2006 Harley Davidson XL 1200 C Sportster...
Aug 25, 2009 | 2000 Chevrolet Impala
Aug 17, 2009 | 2004 Dodge Ram 1500
Sep 20, 2008 | 1999 Chrysler Concorde
Jun 29, 2008 | 1999 Volkswagen Jetta
102 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: