Question about 1984 Honda GL 1200 Aspencade Gold Wing

1 Answer

How to change cooling liquid? I do not know how to

How to change cooling liquid? I do not know how to let old coolant go out. Where is the valve to let old cooland leak out?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,978 Answers

If you look on the front of the motor you will see the oil filter cover on the right side and the water pump cover on the left side. Below the cover attached to the water hose (held on by two bolts) is a bolt with a copper washer under it. That is the antifreeze drain bolt for the motorcycle.

Posted on Aug 27, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I'm working on a 2002 Pontiac Montana 3400 motor. I changed the heater core to fix the water leak and lack of heat on the inside of the vehicle. and when I crack the vehicle to check for leaks and to check...


You need to bleed the air from the cooling system. The bleeder valve is located just behind the water pump housing. It is a small hex head (7MM) screwed into the coolant bypass tube. Pour coolant into radiator with the valve opened until coolant comes out of the valve. The cooling fans will not come on until the temperature reaches 225 degrees.

Feb 18, 2015 | 2002 Pontiac Montana

1 Answer

What is the correct coolant for my 2012 diesel turbo pajero


I Think You Are Takling About Your Truck So My Advise To You Is Replace It With A KIA SEDONA Wich Is The Best And Comes With A TEN YEAR WARRENTY!!!!

I Know KIA Does NOT Make TRUCKS So The Closest Thing
To A TRUCK That KIA MAKES Is A MINI VAN Called The
SEDONA!!! THAT Is The Best Info I Can Give You!!!!

Aug 03, 2014 | Thermaltake Liquid Cooling System Bigwater...

1 Answer

Brand new mini fridge was on it's side before being set up. Plugged in too soon. Now it won't start cooling. Are we out of luck?


It could be that liquid coolant got into the low-pressure part of the cooling system when it was on its side, and is preventing the expansion valve from doing its job converting high-pressure liquid coolant to gas. My recommendation is to unplug it, wait the 24 hours, and plug it back in. Excess fluid should have drained to the bottom of the cooling system by then, and normal cooling can begin.

Dec 19, 2013 | Black & Decker Food Processors

1 Answer

Coolant system


I would only do this if it's the same MFG version.

Apr 08, 2013 | Thermaltake Liquid Cooling System Bigwater...

1 Answer

I have changed the thermostat on my 1996 Olds 88 and have checked the level of the coolant and everything there is in proper order. The blower works in both AC mode and heat mode, when I select cool the...


check the heater inside under the dash and make sure the actuator motor is opening and closing the doors fully on the heater to direct the heat and ac.

Apr 22, 2017 | 1996 Oldsmobile 88

1 Answer

I need to know how much liquid my radiator holds for my 1995 Oldsmobile Achieva?


the rad holds about 1.5 gallons...but if u changed the rad u will need around 3 gallons since the coolant in the engine has also drained out....also open the bleeder valves for the cooling system before filling...these valves r located on the thermostat housing an on top of the water pump outlet pipe...they r brass in color an u will need a 7mm socket on a straight slot screwdrive to open them....u need to open them to allow the air to escape when fill or u can have the system air bound an the engine will over heat an cause damage the the cylinder heads....when coolant runs out of them at a steady stream close them an start the car..do not open them when engine is running....but some cars only have 1 bleeder

Jul 16, 2011 | 1995 Oldsmobile Achieva

1 Answer

My gigabyte problem is. I put the blue liquid and the red light continues beeping even the liquid is full. I don't know what to do...


Here's a link to YouTube video of the Gigabyte 3D Galaxy II.
CLICK HERE
Most of the installation problem are on valve 1 and valve 2.
The red light condition is cause by air pocket and un-able to prime coolant.

Check the video instruction and purge the air pocket out of the lines.
HAVE paper and cotton towel ready!
It can be messy.


Jan 05, 2011 | Gigabyte 3D Galaxy II CPU Water Cooling...

2 Answers

I own a 1985 300zx Turbo?.I like to know why my


Your overflow tank works on suction to return coolant to the radiator. Check the line and nipple ends for any cracking (cracking on the plastic radiator nippl is very commom). The radiator nipple is not under high prrssure like the fluid under the cap (inside the coolant system). It's on the otherside of the cap and will never "stream or gush" coolant (uless you are over heating badly). As the coolant in the radiator cools it creates a vacuum and draws coolant back from the overflow throgh a small hose. You might not see any leaks as coolant heats up and travels to the overflow. It might be a very small leak and you are usaully driving around and drying up before you see it. Even with a very small crack it will only draw in air and not liquid (as liquid is way heavier than air). Also, I've seen where people have taken out (or fallen out) the tube attached to the overflow cap that goes down deep into the overflow tank. That tube should be long enough to almost reach the bottom of the tank. It's hard to know if something is missing if you do not know it was suppose to be there in th first place but it needs to be there.

Jul 04, 2010 | 1985 Nissan 300ZX

1 Answer

My olds is constantly overheating even though i changed the thermostat do i have to now change the head gasket?


things to check
1 coolant level is FULL
2 is the temp. gauge jerky when it moves if so you have air in the cooling system
3 check make sure the COOLING FANS ARE WORKING
4 remove the PCV VALVE front valve cover and see if there is a WHITE ISH COLORED GOO ON IT if so the INTAKE MANIFOLD GASKET IS THE LIKELY CAUSE
5 if all that is good then jack up the vehicle and slide under and look at the BACK CYLINDER HEAD SEE IF THERE IS COOLANT LEAKING OR COOLANT STAINS if so then the HEAD GASKET IS THE CAUSE
hope this was help full
good luck

Dec 12, 2009 | 2000 Oldsmobile Silhouette

1 Answer

Have a minor "fluid leak and dont know how to check the coolant


The 1984 Honda VT500 does have a liquid cooled engine. As for the fluid leak near the top of the cylinder head, it is most likely an engine oil leak coming from the valve cover gasket. Each valve cover uses a rubber gasket as well as rubber seals around each of the bolts that secure the cover to the head. Replacing these should cure the leak.

As for the temperature issue, anything within the white area of the temp gauge is considered normal. Just make sure that the radiator of full of coolant and the plastic coolant overflow bottle is filled to about the half-way mark. Use a 50/50 mix of coolant for aluminum block engines and distilled water.

The lack of power could be from plugged up carburetors (has the bike been sitting for a long period of time?). This bike also has a vacuum operated fuel petcock. Make sure the vacuum running to it is not cracked. Try smoothing the burr that you mentioned with some fine sandpaper - and by all means, make it fuel tight!

There is no published top speed for this Honda - but it should be able to reach about 90MPH on flat ground.

Sep 26, 2009 | 1984 Honda VT 500 C Shadow

Not finding what you are looking for?
1984 Honda GL 1200 Aspencade Gold Wing Logo

Related Topics:

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...