Question about 2006 Yamaha V Star Classic
Hi, Wsjones77 for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Handlebar Installation Tips and Tricks
OEM parts for Yamaha
Posted on Jun 13, 2016
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Try looking up Powersprtseast.com They have a parts fische you can use and though not in color itself may have colors labled on diagram for wiring harness.
Posted on Oct 03, 2009
To change the throttle/idle cables, first you need to remove the fuel tanks so you can get to the carb/throttle body. Loosen the adjusters at the throttle grip on the handlebars. Remove the idle cable first and the remove the throttle cable from the carb/throttle body. Then take the two bolts out of the throttle grip housing halves and carefully seperate them. Remove the old cables from the twist grip. Reinstall new cables in the reverse procedure. Before starting the bike, make absolutely sure that the throttle cables work like they're supposed to and the carb/throttle body will close completely.
To remove the clutch cable, remove exhaust system or whatever might be in the way on the right side of the bike. You need to remove the right side transmission cover. Drain the transmission oil. Remove the chrome right side transmission cover. Disconnect the clutch cable from the clutch release mechanism. Screw the end of the clutch cable out of the cover and take the cable loose from the clutch lever on the handlebars. Reinstall in reverse order making sure you install a new O-ring on the cable at the transmission cover. Replace cover and refill transmission with oil. Reinstall anything else you had to take off.
Posted on Feb 17, 2010
I usually use a piece of wire and tape it the original cable until the cable stops. Then, I run the wire on up to the clutch lever. Remove the wire and measure it.
Then go to Barnett's site and order the cable or see if they've got a "ready made" cable.
Posted on Oct 15, 2010
SOURCE: torque specs for 16" ape
None of my books give any torque specs for either the riser nuts/bolts nor the handlebar clamp bolts. Just use the tried and trusted "Germanic" method. "Gutentite". Use a bit of Loctite 242 med. strenght blue on the fasteners.
Posted on Jun 26, 2011
Testimonial: "pertty much wa i was thnken."
Tips for a great answer:
Feb 13, 2016 | Ultra Motorcycles
Feb 23, 2015 | kawasaki Motorcycles
Feb 04, 2014 | Harley Davidson FLHTC - FLHTCI Electra...
Jun 12, 2012 | 2005 Harley Davidson FLSTC - FLSTCI...
Jan 30, 2012 | Harley Davidson FLSTCI Heritage Classic...
Jun 26, 2011 | Harley Davidson FXDL Dyna Low Rider...
Apr 05, 2011 | 2005 Honda VT 1100 C2 Shadow Sabre
Oct 15, 2010 | 2001 Harley Davidson FLSTF - FLSTFI Fat...
Oct 15, 2009 | 2000 kawasaki VN 2000 Classic LT
Oct 02, 2009 | 2001 kawasaki VN 1500 Vulcan Classic
474 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: