Question about 1999 Honda CBR 1100 XX Super blackbird

1 Answer

99 cbr 1100xx short in head light system causing fi light 2 come on with high beam on fi light comes on also front brake causes light 2 come on .also when running 3/4 hot bike pops n shuts down.i think the 2 problems r not connected but u never know.when cool bike runs great fi light still on but nu running problem only when hot it pops n shuts off.any help would be good thanks.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The problem is within the wiring system. there is a loom that gathers all wires which is used at time of manufacture to test that the bike has been wired properly. once tested the loom is capped and has no other usage. this loom is not depicted in the wiring diagram and over time it degrades and shorts out causing the FI light to come on. the fix is to cut it out. I went through this on my 99 Blackbird. I found this fix on the blackbird site posted by a fellow from Britain.

Posted on Sep 09, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Harley head lights cut on and off


Most likely on the bulb itself if you haven't done any work previous to the problem

Apr 17, 2014 | 2006 Harley Davidson FXSTB Night Train

1 Answer

Turn signals and high beams


First check around all the lights (front, rear, headlight, turn signal, parking, fog, etc..) for loose, broken, or bare wires, and/or loose , broken, or bad connectors. Any of these could cause the lighting to short. If everything is in good working order, then the problem will most likely lie with switch inside the column (the lever).

Jul 15, 2008 | 2001 Volvo S80

1 Answer

THE LOW BEAM WORK BUT THE HIGH BEAM DON'T DASH LIGHTS VERY DIM


YOUR DIMMER SWITCH HAS SHORTED OUT CAUSING IT TO STAY IN THE CLOSED POSITION THE DIMMER SWITCH OR ACTUTATOR IS LOCATED UNDER THE STEERING WHEEL PANEL JUST ABOVE THE BRAKE PEDAL ON THE COLUME CALL OR GET ON LINE TO AUTO ZONE AND LOG ON AND YOU CAN GET A PRICE CHECK FOR A DIMMER SWITCH ACTUATOR LISTED UNDER PARTS REPLACEMENT IN THE ELECTRICAL SECTION

Mar 27, 2014 | 2003 Cadillac CTS

1 Answer

I have a 95 Nissan 4X4 pickup. I have had this


It seems like you have a bad ground wire or a short.

May 26, 2010 | 1995 Nissan Pickup

1 Answer

'99 ford escort head light will dim when


The wiring harnesses in the plugs behind the bulbs are burned up seperate rear of headlight cover and inspect parts available at your ford dealer

Mar 31, 2010 | 1999 Ford Escort

1 Answer

My cbr 954 rr headlight both high beam and low beam & high beam blue indicator light does not work ! no headlight at all ! taillights blinkers and gauge lights are good! is this just the fuse?


Yes - and there is a fuse for just those items. The other possible cause is a bad starter button. When you push the start button, it does two things: activates the electric starter - and cuts power to the headlight until the button is released. So, if it isn't the fuse, it's probably the start button.

Jan 03, 2010 | 2002 Honda CBR 954 RR Fireblade

1 Answer

84 honda shadow 700 vt lights are unpredictable


There seems to be some short in the circuit of the high beam, you will have to follow the high beam wiring, best would be to get the color of the high beam wire frm the head light bulb socket and trace it along you will sure find somwhere the along it the short.
Check the light switch and the blinker switch too.
Hope this helps!

Jun 25, 2009 | 1984 Honda VT 500 C Shadow

2 Answers

CBR 600 rr 04 lights and bike die when switched to high beam


There is a direct short in the bar switch or in the head lamp bucket check the wiring

Jan 22, 2009 | 2004 Honda CBR 600 RR

Not finding what you are looking for?
1999 Honda CBR 1100 XX Super blackbird Logo

800 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...