Question about 1998 kawasaki ZX-9R Ninja
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The torque spec for a chutch nut on a 900 is 180-190Nm (136 ft. lb.) The torque spec for the clutch housing bolts (presure plate) is 30-34 Nm (23 ft. lb.)
Posted on Aug 09, 2009
On your bike there are two clutch parts that can wear and cause this problem. The broken spring should be replaced but is not causing the problem. Check the bottom of the clutch release shaft #13102. The end of the shaft may be broken, bent or severely worn. The part the shaft engages with is the clutch rod #46102. It could be bent, broken or severely worn. This part is inside the clutch hub. Just remove the five springs and then the outer cover plate and the rod should be accessible.
Posted on Jul 24, 2009
Take riders seat off, undo small bolt in front of take. Will now lift up on rear hinge. Remove long bolt from rear hinge, remove fuel pipes and lift off.
Posted on Aug 12, 2009
Tips for a great answer:
Jan 05, 2017 | 2000 kawasaki ZX-9 R Ninja
Dec 04, 2015 | kawasaki Ninja Zx7r Zx9r '94 To '04
Jul 14, 2015 | kawasaki Motorcycles
Aug 11, 2014 | 2000 Yoshimura-2001 Kawasaki Ninja ZX9R...
Aug 26, 2011 | kawasaki Ninja Zx7r Zx9r '94 To '04
Feb 19, 2011 | kawasaki ZZR 600 Motorcycles
May 24, 2010 | 2007 kawasaki ZX-10R
Aug 20, 2009 | 1995 kawasaki GPZ 1100
Jul 18, 2009 | 1998 kawasaki ZX-9R Ninja
299 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: