Question about Honda Fusion Motorcycles
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
ok first you got to find the link that takes the chain apart after you do that loosen the bolts that hold the tire on if you cant do that you can use a breaker bar or put a pipe or on the end of you rachet that will give you more leverage. then sloed the tire forword so you can undo the chain and slide tire off
Posted on Jun 04, 2009
well i would say your very brave,,,but how will you balance this new tyer?????or would you be happy to have the bike doing bunny hops down the road???
for what it costs is it realy worth the efort doing it yourself?
Posted on Mar 27, 2010
remove brake tension nut, remove bolt on frame bar, loosen bolts on shaft clamp after removing nut on shaft then knock shaft out . must have bike on jack to clear ground when working tire loose .
Posted on Jun 11, 2010
SOURCE: remove rear tire honda shadow
Center stand the bike or jack it up to get the rear wheel off the ground ,loosen the rear axel nut, take out the bolt, knock out the spacer on the brake panel, unhook the brake cable , unbolt the bar going to the brake panel, grab the wheel, and slide it sideways away from the final drive. The wheel should slide right off the spline of the final drive and roll out the back under the fender. If the wheel wont slide past the final drive let the air out of the tire. Be sure to coat the spline of the final drive with moly60 paste from your local Honda dealer when reassembling.
Posted on Sep 14, 2010
The first thing to do is determine if the oil is motor oil or gear oil. If the oil is leaking from the final drive end( gear oil ) it will have to be removed and inspected for bearing wear and have the seal replaced. If the oil is leaking from the motor and then running down the swingarm, the final drive and swingarm will have to be removed to replace the output shaft seal.
Thanks and I hope that this helps.
Posted on Jan 05, 2011
Tips for a great answer:
Jul 13, 2014 | 2005 Honda VT 750 Shadow Aero
Oct 30, 2013 | 2004 Honda VT 750 Shadow Aero
Apr 20, 2013 | 2004 Honda VT 750 Shadow Aero
May 06, 2011 | 1986 Honda VT 500 C Shadow
Sep 14, 2010 | 2005 Honda VT 750 Shadow Aero
Jul 29, 2010 | 2005 Honda VT 750 Shadow Aero
Jun 18, 2010 | 2005 Honda VT 750 Shadow Aero
Sep 23, 2009 | 2005 Honda VT 750 Shadow Aero
57 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: