Question about Yamaha RD 250 Motorcycles

1 Answer

I have hose leaking gas under neath,its not connectted to anything and can't find anyplace it could be connected to.help

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,567 Answers

It is probably connected to the carburetor on one end. This would be an overflow hose line and any gas in it is suppose to drip on the pavement. No dripping is what you should have. The float in the carb the hose is attached to is not fully closing. This could be due to trash from the gas tank or a float that is partly filled with gas and no longer floats as it should. Clean the carb and determine why the float needle is not fully shutting off the flow of gas. Please rate my answer. Thanks.

i have hose leaking gas - d4d686e.gif

Posted on Aug 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

4 cyl., 5 speed. Why is it leaking somewhere under the frame - not transmission fluid


Smell the fluid. If it smells like gasoline you have a gas leak. If it smells like antifreeze you could have a hose or a anti freeze cooler line leaking. Or could be a water pump leaking and running along the frame under the car. Get a flash light and crawl under neath the vehicle and see where the fluid is coming from.

Dec 26, 2015 | 1997 Jeep Wrangler

1 Answer

Frigidaire gallery series Model GLGH42FS1 stackable washer leaking


see this causes and fix it. God bless you
Water Inlet Valve
If the hose connections are good to the water inlet valve check that water is not leaking from the valve itself it is replace the water inlet valve.

Drain Pump
Check the drain pump housing and all hose connections. The drain pump is down under neath. To disassemble your washer follow the appropiate tutorial. Hoses can be tightened. If hoses or pump housing is leaking replace the pump assembly.

Tub Seal
This is in the center of the tub. The seal is inexpensive but will require some labor to install. Check the tutorials on disassembling the cabinet then remove the agitater and inner tub. Enter your model # above for a diagram or illustration.
10_12_2012_10_37_02_am.jpg

Oct 11, 2012 | Frigidaire Washing Machines

1 Answer

It leaks


where does it leak from,could be drain hose, or pump or connections to and from drain hose and from pump,, look for rusted clamps under neath,,,or holes, also chek waterhose connections,when loking underneath chek for water spots on hoses and pump..

Oct 10, 2012 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Washer leaks when in use,in rinse ..


see this causes and diagram. God bless you
Water Inlet Valve
If the hose connections are good to the water inlet valve check that water is not leaking from the valve itself it is replace the water inlet valve.

Drain Pump
Check the drain pump housing and all hose connections. The drain pump is down under neath. To disassemble your washer follow the appropiate tutorial. Hoses can be tightened. If hoses or pump housing is leaking replace the pump assembly.

Tub Seal
This is in the center of the tub. The seal is inexpensive but will require some labor to install. Check the tutorials on disassembling the cabinet then remove the agitater and inner tub. Enter your model # above for a diagram or illustration.
9_30_2012_10_40_02_pm.gif

Sep 30, 2012 | Whirlpool Duet Sport HT WFW8400TE Washer

1 Answer

Washer leaking


fix it. God bless you
Water Inlet Valve
If the hose connections are good to the water inlet valve check that water is not leaking from the valve itself it is replace the water inlet valve.

Drain Pump
Check the drain pump housing and all hose connections. The drain pump is down under neath. To disassemble your washer follow the appropiate tutorial. Hoses can be tightened. If hoses or pump housing is leaking replace the pump assembly.

Tub Seal
This is in the center of the tub. The seal is inexpensive but will require some labor to install. Check the tutorials on disassembling the cabinet then remove the agitater and inner tub. Enter your model # above for a diagram or illustration.

Sep 25, 2012 | Washing Machines

1 Answer

My charbroil masterflame 7000 is leaking gas. I beleive I need to replace the regulator and hose. Please advise on how to get the old hose off and put the new hose on. I need a diagram if possible. I would...


If you have already disconnected the hose from the tank. Track it back to where it connects to the burner(s) manifold. It should be up under the grill head. You should see a brass nut. Using an appropriately sized open end wrench, loosen this nut and the hose will disconnect from the grill.

The new Hose/Regulator Assembly will simply attach in the reverse order of how you removed the faulty one. After installing the new one and connecting the hose to the tank. Open the valve on the tank about halfway and check the connections for leaks. Thick soapy water, brushed on with a paint brush will work for detecting leaks. Look for bubbles other than those made by the soapy water. If you see one, tighten the connection a bit more. Be sure not to cross thread the nut, when installing it.

If you haven't purchase a new one yet, you can the Hose/regulator Assembly at any home center or hardware store that sell gas grills and accessories. They run about $30.00.

Hope this helped you and Happy Grilling.

Jun 19, 2011 | Char-Broil CharBroil Master Flame Gas...

1 Answer

Gas leak on 1999 Isuzu Rodeo under neath the truck in front of the spare tire. What is the major problem and how much will it cost to repair?


If it is coming from on top of the gas tank, then you will need to inspect the fuel pump plumbing for a leak. It may be as simple as replacing the rubber gas lines.

My 1997 Rodeo had a leak coming from on top of the tank. After checking it out with a flashlight and a mirror, I discovered that the metal tube that runs down into the tank had rotted. Unfortunately, the metal tube was part of the fuel pump assembly and the entire fuel pump had to be replaced.

You can expect tp pay about $350 for a fuel pump from Autozone. I found one on Ebay (used from a junk yard) and replaced it myself for under $50.

Before you buy anything, make sure you identify the source of the leak. Like I said, it may just be a hose replacement.

Apr 11, 2011 | Isuzu Rodeo Cars & Trucks

1 Answer

Periodic water leaking from Kenmore Elite K701


hello Adrian. I am suspicious that the standing drain pipe behind your machine may sometimes over flow. To find out, pack some dry newspaper around the drain hose where it enters the drain line behind the machine. If that newspaper gets wet you will know that the drain is sometimes overflowing. If that is the case, snake that drain or force a garden hose down it and run hot water thru it for ten minutes. J.

Jul 05, 2010 | Kenmore 24 in. 17482 / 17484 / 17489...

1 Answer

Where to put loose oil hose back in the right place, oil hose is hanging under neath the gas tank can not find where to connect it too


What makes you think its an oil hose? look at the bottom of the tank and make sure its not a drain or vent tube for the gas tank.

Sep 25, 2009 | 1991 Yamaha FZR 600

1 Answer

Air cond leaking water inside car cleaned the hose from under neath found where water coming from inside by gas pedal there is like a hose with a seal around it that is water leak coming from mitsubshi...


The hoses have seal in them that can wear out. The system is supposed to be repaired by a specially licensed mechanic. The freon inside eats up the ozone.
But you may be able to get the special tool at the part store that is made to remove the condioner. Otherwise, you will have to pry the plate and pull at the same time.

Jun 06, 2009 | 2000 Mitsubishi Galant

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

176 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1147 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...