Question about 2008 BMW G 650 Xcountry

1 Answer

On starting a mesage comes on the lcd screen saying 17 wheels. What does this mean?

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 113 Answers

The instrument cluster on that bike was used on the G650 X Challenge and G650 X moto as well as the X Country.

You can change the calibration to accomodate the 21" front wheel used on the G650 X Challenge. This determines circumference of the wheel for calibration of the odometer and speedometer.

Dealer should have set it prior to delivery of the bike.

Posted on Aug 10, 2010

  • mannie55 May 02, 2011

    Not sure that all this chat about the 21" front wheel is relevant or accurate speedo impulse is taken from the rear sensor models sans abs have no sensor or ring in front but the speedo still works! Mannie



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I try to turn screen on and it comes up no service?? What can we do

This means that there is no connection. Check your cables, and reseat them. Turn on your computer and then turn on the monitor. If it still says no service, the input control board may be failing. This could also mean that your Video Card in your computer is not sending out a signal. Test the monitor with another computer that is known to be working, or test your computer with another monitor that is known to be working.

I’m happy to help further over the phone at

Feb 15, 2011 | AOC LM729 17" LCD Monitor

1 Answer

What do you do when your sony screen says "no input sgnal go to power save"?

Try to see if your signal cable from the systems unit is connected to the LCD. If it is connected, then that means that your VGA is not sending any signal, try connecting your LCD to another system unit and see if it works.

Jan 08, 2011 | Sony SDM-HS73P 17" LCD Monitor

1 Answer

I have a samsung 17'' lcd monitor.when i power on my monitor without data cable i got a message on screen CHECK SIGNAL CABLE.when i connect data cable my lcd is going to power off.please help?

The message says that the monitor doesn't receives signal - which is normal. Since the problem appears only after you plug in the cable in means that the problem is located there - something is wrong with your pc, most likely the video card has died.

Oct 03, 2010 | Samsung SyncMaster 710N 17 in. Flat Panel...

1 Answer

White display LCD TV

The screen glowinh white mean it is not getting voltage to the LCD controller, the ribbon cable may have come lose. You need to open it up and look inside.
See some pictures here:

Mar 29, 2010 | Samsung SyncMaster 740N 17" LCD Monitor

1 Answer

NEC MultiSync LCD1770NX 17" LCD Desktop Monitor

components starting to fail. unrepairable. buy a new one

Oct 21, 2017 | NEC MultiSync LCD1770NX (Black) (Black,...

1 Answer

No display, clipping sound appear

The clipping sound is the internal safety switch that keep shutting down the monitor.
It means there is an internal problem on the main board (overvoltage, bad component , short).
Try unplugging power cord and leaving it unplugged two or three hours, this will reset ICs by draining power completely from circuits, it is called hard reset, it rarely works.
CRT monitors waste up to 15 times more energy than TFT screen, if your CRT starts giving troubles, then it is a good time for upgrading it to a new TFT.
17'' start at $120

17'' Dell 1703FPt DVI LCD Monitor w/USB Hub (Black/Silver) -B

171ABB 17" Widescreen LCD Monitor - 1440x900 (WXGA+),

Envision H716A4 17 in. LCD Monitor

19'' Princeton VL1919 DVI LCD Monitor (Black)

19'' panoramic

V7 Series D19W12 19" Widescreen LCD Monitor

Sep 10, 2008 | ViewSonic E70f 17" CRT Monitor

1 Answer

Problem with 17" ViewSonic Monitor

The same problem w/ my viewsonic E70 17" monitor.The viewmeter or viewmatch color on screen do not appear when power ON, although the green led power is ON.

But if you rest your monitor for about 10 hrs or more the viewmeter will appear when you power ON the monitor.

You can now start your CPU.

Remember : No viewmeter screen on monitor when power ON, means no supply coming out the picture tube or high voltage.

But if there is Viewmeter on screen , this normal and OK>

Feb 04, 2008 | ViewSonic VA720 17" LCD Flat Panel Monitor

1 Answer

Computer says disk boot failure when I turn it on.

hard drive failed or you have a cd in or floppy in the drive.

Jan 07, 2008 | Philips 170B5CB 17" LCD Monitor

3 Answers

Lcd GEM Gl-822A--dont show image

It sounds like a problem on the video / signal circuit board inside needs to have electronic troubleshooting.

Jan 21, 2007 | 3G Technology GEM GL-822A/B 17" Flat Panel...

Not finding what you are looking for?
2008 BMW G 650 Xcountry Logo

269 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5248 Answers

Mike Gilbreath

Level 1 Expert

50 Answers


Level 3 Expert

82331 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides