Question about 2000 Cagiva Raptor 1000

1 Answer

Back brake will not bleed - 2000 Cagiva Raptor 1000

Posted by on

  • phil cuzins
    phil cuzins Aug 06, 2010

    Your description is a bit vauge. Have you changed the fluid and the brake is spongy, or are you having other problems?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cagiva Master
  • 41,747 Answers

Hi, Anonymous sorry you can't find the first and best tool you ever bought for your Cagiva despair not for a mere $0 you can download another one. For more information about your issue and free downloads that you will need please visit the websites below. Good luck and have a nice day.
http://www.raptorchapter.org.uk/viewtopic.php?t=2523
Rear Brake Problems Cagiva Raptor 1000 2001
Free Cagiva Motorcycle Service Manuals for download
http://www.oemmotorparts.com/oem2.asp?M=Cagiva
http://www.cagiva.nl/media/owner_manuals/?tx_motomondo_pi4%5Bmodel%5D=&tx_motomondo_pi4%5Byear%5D=-1&tx_motomondo_pi4%5Bmanual%5D=

Posted on Jan 22, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to bleed brakes


Bleeding brakes is pretty much the same across all vehicles. However, are you sure that there's air in the system and not a faulty brake master cylinder? The brake master cylinder has rubberised 'O' seals inside which, if worn, can cause a spongy pedal that has to be pumped before the brakes feel hard.



To bleed the brakes you need a length of plastic tube to fit onto the brake bleed nipple on the brake calliper. You can buy a brake bleeding kit which incorporates a non-return valve. The valve allows brake fluid to be pumped through it but prevents air from being drawn back up the tube into the brake system.



You can use ordinary plastic tube, but one end should be placed in a container of brake fluid to prevent air being drawn back in.



1. Locate the bleed nipple. Usually you start at the wheel nearest to the brake master cylinder (and then bleed each wheel in turn working your way to the furthest wheel from the car -if necessary).



2. Before you begin:Put a ring spanner onto the bleed nipple. Put a finger over the end of the bleed nipple to prevent air from entering via the nipple and 'rock' the spanner to make sure that the nipple will actually loosen. It is quite common for brake bleed nipples to seize then shear when turned with a spanner(wrench..). Don't use an open-ended spanner (wrench) otherwise the chances are you will 'round off' the bleed nipple.



3. Put the ring spanner on the bleed nipple and fit the bleed tube.

Get somebody to turn on the engine and slowly - slowly - depress the brake pedal. Undo the nipple slightly and brake fluid (maybe with air bubbles in it) should be visible in the tube.



get your helper to pump the brake pedal 3-4 times and keep the pedal depressed. Tighten the brake nipple.



4. Then repeat for each calliper if necessary.



5. Many cars have a split circuit brake system. That is, the front offside wheel is on the same system as the rear nearside wheel. The front nearside wheel is on the same line as the rear offside.



Here, you would bleed the front brake first and then the diagonally opposite rear wheel.








bleed-brakes-yytlcu2b3evmxr44xdn3gosb-1-1.jpeg

Plastic tube with non return valve for bleeding brake








bleed-brakes-yytlcu2b3evmxr44xdn3gosb-1-3.jpeg

Generic image - bleed nipple on calliper.








A bleed nipple. The open end is where the tube fits. Usually, you only need undo a bleed nipple approximately one turn. Use a ring spanner, not an open ended spanner.









bleed-brakes-yytlcu2b3evmxr44xdn3gosb-1-10.jpeg



Below: Bleed nipple can be seen on bottom right of calliper (generic image)


bleed-brakes-yytlcu2b3evmxr44xdn3gosb-1-15.jpeg



Below: Ring spanner on bleed nipple with tube attached.


bleed-brakes-yytlcu2b3evmxr44xdn3gosb-1-21.jpeg

Jan 21, 2016 | Cars & Trucks

1 Answer

I can't get my back brakes to bleed how can't I get them to bleed


Make sure master is full, maybe over fill new brake fluid. Find a helper to push on the brake pedal. You loosen the bleed screw (looks a little like a grease fitting with a hole in it) on the back side of the wheel until there is no more air. tighten. Refill Master cylinder. Then other side same process. Do several times. try to collect the "used" brake fluid to prevent a mess. Now do the same for the front to make sure they don't have any air. IF it still is a soft pedal better have reliable brake shop check.

Mar 13, 2015 | 2009 Ford Fusion

1 Answer

My bolero pick truck front brake skid but back wheel brake roll on..load and unload.difficult to adjust, why plz help...!


Might be a leak somewhere in brake lines. Or some gasket gone bad in brakes (then there is probably a leak as well). If no leak then I assume there is some air in the brake system, sounds like in lines which lead to back brakes so I suggest you bleed back brakes (preferably bleed the whole brake system). In my car (not bolero though) there is some kind of braking power balancing system with extra bleeding screw at the back and this could have air in too. You can find further information how to bleed braking system from your car manual or generally from the Internet. Usual drill is to bleed the furthest brake first then continue until closest brake to your car brake fluid reservoir.
PS: If your brake pedal feels soft and get harder by each push then there is definitely air in the system. If it stays soft you might have a leak.

Oct 29, 2013 | Cars & Trucks

1 Answer

Bleeding brakes wheel sequence for 2003 Alero


Bleed the back brakes first until you get clear brake fluid then you bleed the front brakes, make sure you keep the brake master cylinder topped up so you don't get air into the brake lines..

Dec 05, 2012 | Volkswagen Golf Cars & Trucks

1 Answer

1991 ford thunderbird SC power brake problems


take the cap off of your master cylinder fill and open the bleeders on the back brakes and let them gravity bleed

Jul 12, 2012 | 1991 Ford Thunderbird

2 Answers

Im trying to bleed my brakes, why do i need the brake fluid in the bottle?


If your doing a one man brake bleed, you would have a tube attached to the bleeder valve,
the other end submerged in brake fluid, so when your pumping the brakes to bleed the air
bubbles out, no air can go back into the brake system. good luck!

Aug 02, 2011 | 1999 Chevrolet Malibu

2 Answers

I am having trouble bleeding the brakes.i just can't get it up at all .Can you help me.


Hi to bleed the brakes you need to do the following.

1 make sure fluid is topped up all the way
2, then start with one brake and undo the bleed screw use a container to catch any fluid that will come out, now with the bleed screw undone get someone to push the brake pedal down to the floor and hold it on the floor.
3 do bleed screw back up then get the person to pull the brake pedal back up it may be stiff but if you get your foot under you should be able to do it.
4 then once pedal is up undo bleed screw,
5 push pedal down
6 do bleed screw back up
7 pull pedal up
keep repeating that until all the air has stopped coming out, but make sure you keep an eye on the fluid level dont let it get low as you will have to bleed the whole system again

make sure you do the bleed screw up before pulling the brake pedal back up if you dont you will just be sucking air back into the system.

let me know how you get on or if you need further assistance ok

plz rate this solution as i have a whole page of unrated posts, thanks

Aug 28, 2010 | 2002 Kia Sportage

1 Answer

Need sequence to blrrd brakes 02 dakota


Dakota, 2001-2005

Bleeding the Brake System
Brake fluid tends to darken over time. This does not necessarily indicate contamination. Examine fluid closely for foreign matter.
The primary and secondary hydraulic brake systems are separate and are bled independently. During the bleeding operation, do not allow the reservoir to run dry. Keep the master cylinder reservoir filled with brake fluid. Never use brake fluid that has been drained from the hydraulic system, no matter how clean it seems.
  1. Clean all dirt from around the master cylinder fill cap, remove the cap and fill the master cylinder with brake fluid until the level is within 1 / 4 in. (6mm) of the top edge of the reservoir.
  2. Clean the bleeder screws at all 4 wheels. The bleeder screws are located on the back of the brake backing plate (drum brakes) and on the top of the brake calipers (disc brakes).
  3. Bleeder screws should be protected with rubber caps. If they are missing, the orifice may easily become clogged with road dirt. If the screw refuses to bleed when loosened, remove it and blow clear. Aftermarket caps are readily available.

Bleeding the ABS System
This is accomplished using the same methods as for the base brake system. Refer to those procedures.
ABS system bleeding requires conventional bleeding methods plus use of the DRB scan tool. The procedure involves performing a base brake bleeding, followed by use of the scan tool to cycle and bleed the HCU pump and solenoids. A second base brake bleeding procedure is then required to remove any air remaining in the system.
  1. Perform base brake bleeding. Refer to the appropriate section.
  2. Connect the scan tool to the data link connector beneath the dashboard.
  3. Select "Antilock Brakes" followed by "Miscellaneous", then "Bleed Brakes". Follow the instructions displayed until the unit displays "Test Complete", then disconnect the scan tool and proceed.
  4. Perform a base brake bleeding a second time.
  5. Top up the master cylinder.

Hope helps (remember rated and comment this).

Aug 26, 2010 | 2002 Dodge Dakota Club Cab

Not finding what you are looking for?
2000 Cagiva Raptor 1000 Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cagiva Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

Steve P
Steve P

Level 3 Expert

3425 Answers

Are you a Cagiva Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...