Question about 1996 Yamaha YZF 600 R thunder cat
Hi, Temps_up for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $10 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
torque specs for cam cap bolts YZ 400 426 450
Yamaha YZF600 YZF600R 1994 2007 Service Repair Manual PDF Download Manuals...
OEM parts for Yamaha
Yamaha YZF600RP Owner Manual
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e
Posted on Aug 17, 2016
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Rock the caps around to make sure the bearing locating clips are lined up. Torque the bearing caps to 12 foot-pounds. At this point you must check the valve clearances again. If any are off, the cam must be removed and the correct shims installed.
Please rate this solution. Thanks!
Posted on Apr 07, 2009
Refer to a shop manual.Ask dealer or independent shop to look values up.Look up on the I net.Need to find "specification - torque values" from some source.Anyone out there have a shop manual?
Posted on Jun 12, 2009
You can do a continuity test on your coils and plug caps as follows:
1:Disconnect the coil connector drom the wiring harness.
2:select (O x 1)
3:put tester + lead on red/black terminal and - lead on orange(grey)terminal.
4:Your primary coil resistance should be between 1.87~2.53O at 20C.if OK proceed to step 5.
5:Select ( ωx 1k)and check secondary coil resistance(between the two HT(plug leads)this should be between 12~18 kωat 20 C/86 F).
You can also check sparkplug cap which should be 10k.ω
This is just a basic check but I would do is remove plug lead from the offending cylinder ,take up the revs and see if the miss-fire has gone.If so swap your coils around and see if missfire occurs on the other cylinders.If not your coils are OK.
If the missfire is still now only occuring on the one cylinder then you need to do a compression test()and if OK remove carbs and check also the inlet rubber manifold(for cracks ,seating etc.)and then service them.
Once off you can also see if the butterflies are in sinc.But do these simple tests and if you have a problem come back to me.
Posted on Aug 06, 2009
Tips for a great answer:
Dec 18, 2015 | Ford Cars & Trucks
Dec 18, 2015 | Cars & Trucks
Nov 29, 2015 | Mercury Cars & Trucks
May 04, 2014 | 2000 Yamaha YZF 600 R thunder cat
Jan 08, 2013 | 1993 Honda CBR 600 F(2)P
Aug 05, 2012 | 1998 Yamaha YZF 600 R thunder cat
Feb 22, 2012 | 1996 Yamaha YZF 600 R thunder cat
Jan 20, 2011 | 2004 Yamaha YZF-R1
Oct 18, 2010 | Yamaha YZF 600 R thunder cat Motorcycles
Oct 16, 2009 | 1995 Yamaha FZR 600
Aug 19, 2018 | Motorcycles
137 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: