Question about Suzuki RM 250 Motorcycles

1 Answer

Where are timing marks on 1985 suzuki rm 250 - RM 250 Suzuki Motorcycles

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

This is taken verbatim from the Clymer's manual for 81 - 88 rm 125 - 250's. "The ignitiion timing is preset and does not need periodic adjustment. The timing should only need to be checked if the stator assembly has been removed for engine repair or ignition repair." If you did install a new stator, the manual has a picture which shows the rib of the case aligned approximately in the middle of the stator timing mark.If you're still unsure, I would invest in a manual as "If the stator timing mark and the rib are not aligned, ignition timing will be incorrect. Incorrect timing can easily cause serious engine damange as well as lack of performance."

Good Luck

Posted on Aug 28, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I fit a SUZUKI RM 250 Engine into a 2000 RM 125 frame?


Hi, Anthony sounds like something I would try when I was a kid but after careful deliberation 4 out 5 Suzuki Gods give this one a thumbs down, but just to be on the safe side you should give your local dealer's parts/service department a call to confirm it's just not worth the time trouble and expense you would be better off getting a used 250 bike. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
swapping rm 250 engine into rm 125 frame Suzuki 2 Stroke
Dirt Rider Magazine
RM125 250 frame
will my 250 motor fit in newer 125 frame Suzuki 2 Stroke

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Jul 24, 2016 | Suzuki Motorcycles

1 Answer

What is the piston to bore clearance or cylinder wall clearance on a suzuki rm 125 1986 Evo please


0.025-0.03 mm
I have a 250 EVO 1985 something...............
Blue engine, mono damper, full floater fork

Jan 27, 2015 | Suzuki Motorcycles

2 Answers

Hi im just wondering what the fuel mixture should be for my 1996 rm 250 ? thanks mark


For a 250, you can get away with a leaner mix like 40:1 but I still race a 250 2-stroke from time to time for fun and I run 32:1. More oil = less friction, less heat, better sealing, etc...

Any idea what it was jetted to run? the difference between 40:1 and 32:1 is fairly minimal and if the bike is jetted fairly well I doubt you will tell a difference. If the plug is black it is too rich.

Sep 12, 2011 | 2003 Suzuki RM 250

1 Answer

I have a 1985 rm 250 ...I need a clutch cabel and I live like 46 ish miles from the cloest place that can order me a cabel ....I was wondering what the stock length of that cabel so I can get a aftermarket...


Go to this website www.babbittsonline.com then click as shown in the image below. They have your cable in stock; Part # 58210-14600. The cost is $19.89. Please rate my answer. Thanks. tombones49_244.gif

Aug 17, 2011 | 2003 Suzuki RM 250

1 Answer

I'm having trouble starting my 1985 rm 250 and I


It means that unburned fuel collected in the exhaust pipe then ignited when the spark plug fired due to the rotation of the crankshaft. It also means the spark plug is firing and the cylinder is getting gas... too much gas. The engine is flooding out due to much choking of the carb during kick starting.

Aug 16, 2011 | 2003 Suzuki RM 250

1 Answer

I'm having trouble starting my 1985 rm 250 and I


The motor is not meant to run backwards try rolling it forwards and pop it in 2nd gear. Good luck

Aug 16, 2011 | Suzuki RM 250 Motorcycles

3 Answers

What type motor oil for Suzuki RM 250?


The engine doesn't use oil,the only oil it gets is from the 2 cycle oil mix in the gas,the transmission uses 85\90 transmission oil such as bel-ray or others. I would NOT reccomend running 10\40 in the trans...

Apr 28, 2010 | 2003 Suzuki RM 250

2 Answers

How do I tighten the chain on my 1985 Honda 200X


eleavate the back wheel,lossen wheel, lossen chain adjusters, make sure both sides are at the exact mark and back and tighten pull

Jul 16, 2009 | 2005 Suzuki RM-Z 250

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

744 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

Marvin
Marvin

Level 3 Expert

81285 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

5055 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...