Question about Aprilia RS 125 Motorcycles
Hi, Nicholtommyc for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix or parts inquiry. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.
DOWNLOAD Aprilia Rs 125
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e
Posted on Oct 29, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: de-restrict an aprilia rs 125
You shouldn't have to restrictions only happen on faster bikes 600cc onwards but if you talking about the inabilty to push your revs to the very max, I wouldn't do this unless you know what you doing, and by you asking this question, you don't know what u doing, this rev restriction is set in place for safety of your engine, rather than restricting speed.,,,
Posted on Nov 10, 2008
SOURCE: Clutch cable's change
If this is the same as the RS125 cable i changed then the cable goes into the clutch cover engine casing yes? You do not have to take the whole engine apart you need to disconnect the cable from the lever and then you will have to take the clutch cover off. before you do this you will need to lean the bike on its side as you will lose the gearbox oil otherwise. plus the cluch will fall out as it is held in with dowels and not bolted (stupid design) once you have the cover off then you can disconnect the cable. if your gentle when taking the cover off then u will not have to replace the gasket however this rarely happens you will deffianly need to get a new gasket about 4quid. reconnect your new cable and then put the gasket on and be carefull wen putting the casing back on the engine making sure you do not damage the new gasket.
hope this helps.
Posted on Feb 25, 2009
i sure hope you didn't use car oil but bought motorcycle oil. The clutch is a wet-type system that uses engine oil to keep it cool. Motorcycle oil is formulated differently than car oil, which has detergents in it to add lubrication and engine life that will cause a motorcycle's clutch to slip. A new clutch is both inexpensive and easy to replace. When you buy a new clutch, don't forget the clutch cover gasket. i recommend EBC clutches.
1. Set up a little pan with MOTORCYCLE oil in it and place the new clutch discs and pressure plates in it so that they get well-covered with clean oil.
2. Drain the oil, remove the clutch cover and remove the bolts on the cover of the clutch basket.
3. Remove the old clutch parts and make sure you pay attention to what the last part is (disc or pressure plate).
4. Install the new clutch, starting with the last part you removed and alternate between the discs and pressure plates until you run out.
5. Reinstall the clutch basket's cover plate and re-torque the bolts to the specified setting, using a cross-sequence like you would on a wheel.
6. Clean all the old gasket off, install the clutch cove and new gasket and fill up your engine with oil.
7. Ride away happy because you just changed your first clutch!
Hope this helps,
Posted on Sep 16, 2009
Tips for a great answer:
Jul 18, 2017 | 2007 Aprilia RS 125
Sep 20, 2016 | Aprilia RS 125 Motorcycles
May 02, 2014 | 1999 Aprilia RS 125 Extrema
Apr 05, 2014 | Aprilia RS 125 Motorcycles
Aug 29, 2011 | 1998 Aprilia RS 125 Extrema
Aug 08, 2010 | 2000 Aprilia RS 125
Jul 07, 2010 | 2007 Aprilia RS 125
May 10, 2010 | 1999 Aprilia RS 125 Extrema
Mar 17, 2010 | 1999 Aprilia RS 125 Extrema
55 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: