Question about 2004 Honda VTX 1300 Retro
Speedometer no longer works but the odometer still does the needle for the speed doesn`t move @
Hi, Bythelake534 and the usual suspects are:
1. Contaminated or faulty speed sensor.
2. Faulty turn signal module.
2. Corroded, broken or loose connector pins/sockets in the wire harness between the speedometer and the ECM or TSSM and the sensor.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Speedometer Not Working
Speedometer or Speed Sensor
Honda VTX1300S Service Manual
Honda VTX1300C VTX 2004 Owner Manual
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e
Posted on Feb 15, 2018
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Had the same problem with my GL 1100 I. A rock had kicked up and hit the speedometer cable mount at the fork and split the plastic screw mount. The cable terminus started to back out from the fork. Any way went to Honda spent $12.00 on a new speedometer cable and installed it in about 10 min.
Posted on Oct 05, 2009
SOURCE: Speedometer not working on 1994
Hi there, Your problem will most likely be that the speedo drive coller has failed!
This is an easy fix,( Part number of the part is 44808-MR7-013) you will be able to order it from your local dealer.
The speedo on the CB1000 Big One is driven off your front sprocket, you will need to take off the side covers on the left hand side of the bike.Stars by disconnecting the gear selector from its shaft (check the two marking dots, on the end of the shaft and selector, make sure you refit in same position!) then take out the 3 fixing bolts and remove outer cover. then you will have to remove 3 long bolts only ( leave the short servo bolts) this will let you remove the inner sprocket cover. and on the Nut of the front sprocket is a small white round drive bush. this is what will have failed check for damage! and replace. I would recommend changing the speedo cable at this point to. if your speedo cable has snagged inside its sleeve, it will go stiff causing the drive bush to crack or round out.
Posted on May 13, 2011
Tips for a great answer:
Dec 18, 2013 | 2006 Honda VTX 1300 S
Sep 04, 2013 | 2004 Honda VTX 1300
Nov 20, 2012 | 2005 Honda VTX 1300 C
Apr 13, 2012 | 2004 Honda VTX 1300
Feb 08, 2012 | 2004 Honda VTX 1300
Nov 27, 2017 | 2004 Honda VTX 1300 Retro
Jun 14, 2011 | 2005 Honda VTX 1300 R
Dec 25, 2010 | 2004 Honda VTX 1300
Mar 29, 2010 | 2005 Honda VTX 1300 R
Aug 18, 2018 | Motorcycles
94 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: