Question about 1991 Honda GL 1500 Aspencade Gold Wing

1 Answer

Shuts off when put in gear

The bike has been sitting for a while. dad was not able to ride so i went to get the bike and it starts but dies when i put it in first gear ,,HELP !!

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 4,070 Answers

Hi! First of all I suggest that you check on the spark plugs. The spark plugs may be faulty causing the bike to fail due to poor fuel burning. If the spark plug is faulty then you will have to replace it to get it running. I suggest that you drain out the fuel too and fill a new one. The fuel has a tendency to expire specially the bike was sitting for quite a while. Hope this helps and have a good one!

Posted on Aug 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Starts and runs fine but when I put it in gear it dies


Riding Mower Dies When Put in Gear ' ThriftyFun

www.thriftyfun.com/Riding-Mower-Dies-When-Put-in-Gear.html
It starts fine, but when I put it in gear to go forward or reverse it dies. It also dies ... The engine on my riding mower will start and run while the clutch is pushed in.

Starts and Runs but Dies When put in gear - YSR 50 ' South Bay Riders

www.southbayriders.com > ... > Community > Maintenance and Repair

Aug 25, 2010 - 15 posts - ‎4 authors
The bike will start and run perfectly fine. However, the moment I put it into gear it dies. ----------------- How we got to this point:...

Engine dies in gear, runs in neutral - Hot Rod Forum : Hotrodders ...

www.hotrodders.com > Tech Help > Engine

Jan 4, 2010 - 12 posts - ‎10 authors
But if I drop it into any gear besides neutral or park, the engine will ... In this case, it shifts fine, and on time, however acceleration is ... start. the engine idling rough and wanting to stall when put in gear is the indicator to me.

Jan 21, 2016 | Garden

1 Answer

When riding in 5th gear starting losing cylinders. and bike dies? then bike won't start electrical start. can' roll bump start bike if i let sit for an hour. thn bike dies quickly. is my m


More likely to be your ignition coils. They heat up and expand this can cause an open circuit which will close up again when it has cooled down. Although, a bad charging system may cause this problem. Check the battery voltage with engine switched off ( approx 12 volts) and with the engine running (approx 14 volts) If you are getting 14 volts then your battery is dead, if you aren't, then your charging system has a fault.

May 06, 2012 | Honda CB 750 Motorcycles

1 Answer

Problem with 800cc suzuki intruder 2002 2002 suzuki intruder 800cc amonth ago i changed all fuilds and brakes also plugs and filter brike ran really good yesterday a couple buddies wanted to go riding


when i shut off my 2002 suzuki motorcyle it run perfect then went to start i and have no power battery good have no light on dash no head light brrake light everything is dead what could be wrong can you help with a idea thank you dave

Mar 26, 2012 | Suzuki Motorcycles

1 Answer

I have a nid 70s enduro 100 it runs great but whaen i put it in gear it jumps a bit then dies it starts in gear as long as the clutch is not engaged im a bit lost ps i do know how to ride so its...


It sounds like your clutches are stuck.If the bike has been sitting for awhile the clutch plates will stick together. Sometimes they will unstick.1st I would change the oil. Then i would place the front tire up against a solid wall start the bike pull in clutch put in gear ,repeat a few times.If this does not unstick the clutch you might have to replace your fiber clutch plates.Hope these helps
D.

Sep 27, 2010 | 2002 Yamaha TT-R 125

1 Answer

'06 vtx 1300 c : engine dies when put into gear


You have one of two things going on. (1) You need to check the kick stand switch, your bike thinks the kick stand is still down. It may have been loosened out of adjustment by vibration. If the kick stand switch is out of whack, it will restart as long as the clutch in pulled in. But as soon as you try to let out the clutch it will kill the engine, if it is in gear. (2) Next problem could be, you need to loosen up the clutch cable a little bit, The clutch control on the handle bar has a screw type of adjuster (clutch cable passes through it ), try loosening it till it's easy for you to move the bike without the engine shutting off. Hope it helps and comment if you need more clarification.

May 08, 2010 | 2006 Honda VTX 1300 S

1 Answer

I went in some deep water on my cr 125 and it stalled so i tiped my bike upside down to drain the water out of the tail pipe still could not start so when i got i took the gear box oil out and let it sit...


Drain your carb, the bottom of the bowl has an hex plug that needs to come off, as water sits in it. Also, pull the fuel line and drain some fuel into a glass to see if you have water in your gas tank also. You will see it because water seperates from fuel.

Aug 20, 2009 | Honda CR 125 R Motorcycles

1 Answer

Place in gear and bike dies


If your kickstand is down it will die on you.

Jan 11, 2009 | 2006 Suzuki GSX-R 750

1 Answer

Engine dying


Check your kick stand sensor if it's unplugged then there is your problem. If it's still plugged in then the sensor might be gone. The sensor shuts the bike down if you try to take off when the kick stand is down. you can bypass the sensor by jumping the two wires before the sensor with a piece of wire connecting the two leads together. doing so will allow the bike to be put into gear with the kick stand down so always check it so you won't have an accident.

Nov 20, 2008 | 2008 BMW HP2 MegaMoto

Not finding what you are looking for?
1991 Honda GL 1500 Aspencade Gold Wing Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...