Question about 2003 Yamaha YZ 250

2 Answers

2000 yamaha yz 250 the clutch slips and then grabs and doesnt want to shift properly i took out the disks and cleaned them and put it back together its a little better but still not right what could be the problem?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

Replace your clutch and springs

Posted on Aug 04, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,978 Answers

Your CLUTCH CABLE is probably damaged and is binding for a second or two before it lets the clutch fully engage. Unhook both ends of the cable and slide the cable back and forth through the housing. If there is any drag or it binds at all replace the clutch cable. This should take care of the problem.

Posted on Jul 31, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I recently bought a 2008 Yamaha yz250f. My first four stroke . The guy said he just put in a new clutch two rides ago. I rode it when I got home. And the clutch slips like crazy. Cable free play is ok....


Hi, Hillclimber7 sounds like the center adjusting screw on your pressure plate is too tight for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Dirt Rider Magazine
Clutch Mods YZ250F Smoother Shifting and Easier to Find Gears
2001 2013 Yamaha YZ 250 Service Manual YZ250 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Mar 14, 2012 | 2007 Yamaha yZ 250 F

1 Answer

I have a 2004 Yamaha YZ 250 (2- stroke) that is in need of repair if I am to continue riding it, or if I want to sell it (the right way- by fixing it first- and not screw someone over) I used to be a super...


Hi, Jesse for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
2014 YZ250 5th gear slipping skipping Yamaha 2 Stroke
2013 YZ250 Disassembly
YAMAHA YZ250 LC Owner Service Manual
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Dec 03, 2010 | 2004 Yamaha YZ 250

1 Answer

The cluch plates nor releasing properly its ither on or off theres no slow release


The clutch needs to be taken apart and make sure the plates stay in EXACTLY the same order and facing the same way.This is crucial.Clean them and put it all back together.This is the first step.Whilst apart check they are not warped by using a piece of glass to sit them on.If they are,the clutch plates need replacing.Hope this helps

Dec 29, 2009 | 2003 Yamaha YZ 250

1 Answer

HELLO,every time i use my boat the little hand squeezer for the gas just sucks up by its self and doesnt let gas go to the fuel pump.what do you think it is.250 yamaha four stroke


There is gunge in the hand primer. remove from rubber hoses, wash in clean petrol ( use gloves) and put back together. Reprime the pump by squeesing and releasing

Dec 04, 2009 | 2003 Yamaha YZ 250

1 Answer

I have a 1990 yz 125 my clutch wont grab at all


did you torque the spring up when you put them in and did you put the push rod in the middle |???

Oct 08, 2009 | 2003 Yamaha YZ 125

1 Answer

5th gear gone


Your clutch most likely is getting weak, replace the clutch plates and friction disks they come together as a pair pack, you need to drain the oil remove the clutch cover on the side of the motor and then remove center nut and using a hook tool unhook the 4, 5 or 6 springs that hold the clutch pack together they are pretty tough to remove and if you are not fairly mechanically inclined there may be issues with tools and skill sets. I hope you can replace the clutch pack yourself you will save $100.00 + if you can. Remeber to carefully put the plates in order as you disassemble the clutch, lay the parts out on a clean towel or rag in the order they come out and put the replacement parts in the same exact way an order the old ones came out, the challenge is to reattach the springs they can be quite achallenge here's a pointer use a pair of needle nose vise gripes to clamp hold of the spring ends and connect them to the cover plateon the outer clutch pack assembly.

Jul 22, 2009 | 2004 Yamaha YZ 250

1 Answer

Gear slipping


try adjusting the clutch

May 15, 2009 | 2003 Yamaha YZ 250

2 Answers

I cant get my 03 yz250f out of first and back into neutral


Hello,

Your clutch is maybe malfunctionning.
Check if your clutch cable is tight enough.

Apr 02, 2009 | 2003 Yamaha YZ 250

1 Answer

2000 yz 250(new clutch plates,springs/carefully filed basket)


Sounds like someone stomped on the shift lever while you were taking that break. Yes, it sounds exactly like a bent shift fork.

Mar 17, 2009 | 2003 Yamaha YZ 250

Not finding what you are looking for?
2003 Yamaha YZ 250 Logo

Related Topics:

276 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1147 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...