Question about 2005 Suzuki SV 1000 S

Open Question

I have a 2003 SV1000S. The horn isn't working so

I have a 2003 SV1000S. The horn isn't working so I started to look for it. I can't find it. I don't want to strip the whole bike down to find that it is somewhere obvious and I'm just not seeing it. Can anyone help?

Posted by on


3 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 2003 suzuki sv1000 engine knock

You're big end bearings are just about to give out. I've just rebuilt two * 2003 SV1000 engines where the bearings had failed.
Get it done now and save your engine!!!

Posted on Mar 08, 2010

  • 2100 Answers

SOURCE: How to check and add coolant to a 2003 Suzuki SV1000S

You have a cap on the radiator and an expansion tank hiding in there somewhere. I would check them both. Your coolant should be fine, may need just a little filling. Unless you are cooking something. My bike is a 02 and I have not had to even check the coolant. Also, if you have a water temp gauge that reads in degrees and not a light, the temp of the bike should relate to the air temp, while running, not city, If it says, 185, the outside air is 85, If it reads 192, outside air is 92, etc. . Check it out.

Posted on May 08, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Please help with 2003 toyota corolla s

It may be the starter or in the ignition system. Have it ckd out

Apr 20, 2017 | 2003 Toyota Corolla

1 Answer

2003 mercedes clk 320 horn malfunction horn works without pressing button

When I try to start my merc clk 2003 the horn blasts but has been fine all day. Any suggestions?

May 30, 2012 | 2003 Mercedes-Benz CLK-Class

1 Answer

How to fix a horn on a 2003 cavalier.... The fuse is good, so I know it's not that. Please help!

The horn is located on in the right front fender behind the wheel well.You need to remove the plastic cover around the front part of the wheel well and pull it back enough to see the horn.Remove the wire from the horn and you can use a test light to see if you are getting power to the horn.The ecm(engine control module) is right by the horn so be careful with the wires harness.If you don`t have a test light you can use a piece of wire and hook it to the battery and put power to the horn.It should beep.If not replace the horn.If it does work then you will need to trace the wire back to the relay center under the hood.Hope this helps.Good luck.

Feb 17, 2012 | 2003 Chevrolet Cavalier

1 Answer

Air intake noise when I turn it on.?

Describe the noise.Is it a hiss,like something isn't connected tightly?Or is it a horn sound? IF it's a horn sound,it could be coming from a component right at the rear of the engine. I replaced one on my boy's Crown Vic.It's hard to do without having some good selections of 1/4"drives or small wrenches.
That sound got so bad that people were getting mad at Justin because they thought he was sounding his horn at them.
I don't remember the name of the component,but it cost me 50 bucks at Auto-Zone. don-ohio (:^D

Nov 09, 2011 | 2000 Mercury Grand Marquis

1 Answer


HI. The first check point will be the fuse. make sure that the fuse filament isn't severed. This is common. If the fuse is in good condition, move onto the wiring and horn device. There may be a disconnection at the horn connection point. You can also test the connection wires for shorts, as well.

More than likely the actual horn may need to be replaced if the wiring and fuse prove to be in good condition. A basic multimeter can be used for the wire test, if you have one.

NOTE: In rare cases, the horn switch in the steering wheel could be the culprit, although, highly unlikely in most cases.

Nov 01, 2011 | 2003 Pontiac Sunfire

1 Answer

My horn isn't working quite right. It only blows if you push the button in a certain place and that certain place moves around all the time. But even when it does blow, it stutters. I don't think...

if it was a fuse problem the horn wouldn`t make a sounds like the horn contacts that touch when you push on the button are not making proper contact each time.if you remove the horn button and look at the contact spots you may see the problem(uneven contact surfaces).if you move/bend the contact surfaces closer to each other of straighten this may help the may even have a horn that needs to be replaced as you said when it does work it stutters and not blow.the diaphragm in the horn can dry out and not vibrate like it should.try tapping on the horn when someone tries to blow the horn if it stops or gets louder then the diaphragm is no could also check the connection at the horn itself it may have a bad connection due to corrosion and just need cleaning.

Aug 10, 2011 | 1992 Jeep Wrangler

1 Answer

I have a 97 Jeep Grand Cherokee Laredo and my horn has gone out. According to the jeep dealership, they think that it is the horn switch in the steering wheel that has gone out but they want over 200 for...

If the abs light is on and the horn does not work generally it's due to a broken "clockspring" in the column. You can replace that but definitely need a haynes or chlton manual to use as a guide. If you do the repair without instructions or don't follow them exactly, the air bag can deploy in your face (hurts a lot....dangerous). If only the horn isn't working, I'd get another opinion before allowing anyone to do the job. The clockspring and airbag are separate items and I don't see a reason to be replacing the airbag (unless the dealer found something I'm unaware of, but I doubt it).

Jun 20, 2011 | 1997 Jeep Grand Cherokee

2 Answers

Hi my name is angelo an i wanted to no if you can start a sv1000s without a fuel pump?

hi the answer is no, this bike is fuel injection which requires high pressure, will not work with gravity fed system

Dec 11, 2010 | 2003 Suzuki SV 1000 S

2 Answers

Where is the horn located on suzuki sv1000s m/cycle?

the horn is right of the fan on the radiator

Apr 18, 2010 | 2005 Suzuki SV 1000 S

1 Answer

Suzuki sv1000s , f1 light came on and the bike doesn't start

Sounds like you have a problem with the computer or the FI system on the bike. That is what the (F)uel (I)njection is on for.

Aug 16, 2009 | 2003 Suzuki SV 1000 S

Not finding what you are looking for?
2005 Suzuki SV 1000 S Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts


Level 3 Expert

76051 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers


Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides