Question about 1990 Yamaha FZR 600

1 Answer

The lites keep going out and it blows a fuse

Head lites keep
going out

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 39 Answers

Check to see if the bulb may be blowen (some times the bulb when it blows it comes on and off)

check to see if the bulb is seated in the bulb socket/connecter properly (alot of times the bulb connecter is not pluggen in fully resulting in a bulb comming on and shutting off)

check the wireing going to your lights to see if that may be the issue (there may be a break in the wire that cant be spotted by just looking at the casing

depending on if the lights your talkingabout are on a car or ATV

for car (sometimes a bad relay can cause the lights to go out)

ATV the lights can g out because of a bad wire like mentioned alredy

depending on what the bub type the light takes you can try replacing the bulb connector (having carroded contacts can cause a light to fail funtioning properly

good luck and i hope this helps

Posted on Jul 27, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Had an FL4 error code and in-line fuses were blowing, replaced the R0367100 igniter (old one missing the tip) and fuses, but still blowing the 2 fuses and getting the 04 code.

make sure the wiring is correct then take fenwall off turn around to see if burned spot where ignitor wires go in sometimes the ignitor will take out the fenwall shorting it out so you will keep going through ignitors

Sep 15, 2014 | Jandy Laars Lite 2 Pool Heater 125,000 Btu...

1 Answer

Checked fuse keeps blown turn brake light and spedomter not working

Hi Anonymous, if your instrument and or lite circut fuses keeps blowing when you turn the ignition switch on then you have a dead short in one of these circuits. Go to they have a wiring driagram for a 2001 FLHTC you can download for free, it should be close enough to use on your 2003. Get out your test lite out and start checking wires, connector blocks, connector pins in the light circuit. Connect the test lite to battery positive and starting from the fuse panel work you way foward by stabing the power wires until the test lite stops lighting, and bingo you are very close to the short, repair as necessary. Good luck

Btw, I’m available to help over the phone in case u need at

Apr 22, 2014 | 2003 Harley Davidson FLHTC Electra Glide...

1 Answer

Fuse for dash board lights and tail lites keeps blowing

You may have a damaged wire leading to one of the lights that keeps blowing.
Not fun, but you have to chase down the wiring to everything that keeps blowing out.

Mar 19, 2014 | Ford Focus Cars & Trucks

1 Answer

Voltage regulator fuse keeps blowing on my 98 ford explorer

Well I looked at the wiring diagram and I did not see a 30amp fuse.
There is a 15amp, a 7.5 amp, and the two fuseable links between the battery and the alternator. Thats not to say a 30amp fuse for the charging system does not exist, but its not in the standard diagram.
Do you have battery power on the large alternator post when the key switch is off ? And do you have power on the lite green and red wire when the key switch is on ?


Jul 11, 2013 | 1987 Ford F 150

1 Answer


the power feed is grounding out or the head light switch is bad

Jan 24, 2010 | 1996 Jeep Grand Cherokee

1 Answer

05 altima blows fuse for left headlight

Go out at night, or dusk, with a flash lite, replace the fuse with a higher amp or any spare fuse, turn out the lights, turn on the car lights, look for a spark somewhere, have people standing around engine comp, if it doesn't blow, wiggle wires, if it shorts out, you should see a spark, fix with tape, you should be all set.

Dec 29, 2009 | 2003 Nissan Altima

4 Answers

No dash lights when your lites are on out of a 1997 toyota hilux 4wd deisel .no fuses are blownen?

i have a 1992 hilux surf import turbo diesel and my head lights go on but no dash lights indicators work fuses keep blowing what does this mean??

Sep 11, 2009 | 1997 Toyota 4Runner

1 Answer

Fuses keep blowing

probably to much voltage going through i would see the maannual to see if there is any way to lower the power going through

Or your using a fuse which is to low and need to use a higher voltage fuse

if non of those i would call a technician

Apr 20, 2009 | Teledyne Laars Laars Lite 2 Pool Heater...

1 Answer

Tail light fuse keeps blowing

it sounds like it may be an electrical problem, you ae going to need to follow the wiring harnesses from the tail lites back to the fuse pannel as well as the dash lites if you don't find where it is shorting out. how ever the first place I would look is to see if you have a plug in for towing a trailer and if so I would start there. I would also check the pigtails where the lites plug in to see if they are all rite.

Oct 12, 2008 | 1986 Oldsmobile Ciera

Not finding what you are looking for?
1990 Yamaha FZR 600 Logo

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts


Level 2 Expert

314 Answers


Level 3 Expert

1216 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1165 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides