Question about 1991 Yamaha XJ 600

2 Answers

Yamaha Grizzly 600 starter clicks and wont start unless I keep pushing the button repeatedly.

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 200 Answers

A loose conection at the starter or the starter relay is bad.Thanks you for asking and I hope it helps.Please leave me a 4 thumbs up.

Posted on Jul 20, 2010

  • crbnfibr Dec 15, 2010

    mine does it when my battery isnt charged or is cold or is dying....

  • michaelbree
    michaelbree Jul 03, 2012

    I have the same problem on my bike. I have replaced the relay starter and checked the battery which is fine. I'm starting to think I need the connectors may be damaged. Is there anyway I can tell?

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It is your idler gear and flywheel I have the same problem about $900 TO FIX

Posted on Apr 06, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 yamaha grizzly issues when warm


Check oil level capacity, to ensure in specs. Check spark plugs, ensure its clean and correct plug for your quad.the only other could be is ign coil breaking down when warm. Check fire at plug when this happens. First ensure oil level is correct. Make sure your electric fan is on when bike is warmed up.

Nov 07, 2017 | ATVs

1 Answer

I have a 2009 Yamaha Grizzly 550, turn key on push start button and just clicks? Would the contactor/solenoid be bad? The winch is wired to the solenoid but it works! Checked the fuses,wires, and...


Could possibly be bad starter. If battery is fully charged and runs winch shows problem at starter. Try tapping the starter with a hammer. Then try starting it.


If you need further help, I’m available over the phone at https://www.6ya.com/expert/michael_70df8fb57a5e233e

Oct 08, 2017 | Yamaha Motorcycles

1 Answer

Yamaha grizzly push starter button starter continue to turn until battery is disconnected what' wrong


I would suspect the start solenoid is stuck in the on position. There is a possibility you might have a short but I think it is the solenoid. Check it out.

Mar 01, 2013 | Motorcycles

2 Answers

My 2006 yamaha grizzly 660 wont turnover enough to start. it started out i thought the starter was goin bad because when i hit the button to start it, it would just click. but if i kept tryin it would...


Howz your battery, is it fully charged? Charged it using a trickle charge to full capacity.
The fuses are they good or blwon? Replace if blown.
Check your sppark plug if not been replaced in the last 6-12 months

Nov 07, 2010 | Yamaha XT 660 R Motorcycles

1 Answer

I replaced the starter relay and still no starter action there is no power coming from the relay to the starter but the positive lead from the battery to the starter relay has 11.98 volts. 2001 660...


When you push the start button and the relay clicks the lead from the relay to the starter should have 12volts. If it doesnt you either the relay is bad or the cable(lead) is bad from the relay to the starter.Hope this helps.
D.

Sep 27, 2010 | 2008 Yamaha XT 660 Z Tenere

1 Answer

Bike wont start


You have to check the starter motor,prolly the brushes are gone . Also check the connections from battery to the solenoid and from the solenoid to the starter.

Good Luck.
Knight (Yamaha seca XJ750A 1981)

Apr 16, 2009 | 1991 Yamaha FZR 600

Not finding what you are looking for?
1991 Yamaha XJ 600 Logo

941 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

vince

Level 3 Expert

1216 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1165 Answers

D. E. Hev

Level 3 Expert

1181 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...