Question about 1979 Yamaha RD 250

1 Answer

What to do if lights are not functioning like indication lights and break lights

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

1. The yamaha has a lamp coil if that is out it would run your battery down, should be a resistor ( maybe mounted under the tank ) if that's out you won't have to worry about bulbs they will blow quickly, if the battery is bad that also can blow bulbs, then a bad ignition switch shorted your lites won't come on and being that old have you checked all the grounds?

Posted on Jul 16, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Zanussi dishwasher ZDF601M 1 in 3 red light comes on and programme doesn't work through


26269906-aipk5px1bmfkdpsmrgevaqwn-3-0.jpg "3 in 1" function
This appliance is equipped with the "3 in 1" function, that
allows the use of the "3 in 1" combi detergent tablets.
This function can be selected with all washing programmes.
With the selection of this function the inflow of rinse aid and
salt from each respective supply container is automatically
deactivated and also the indicator lights for salt and rinse aid
are deactivated.
Select the "3 in 1" function before the set of a washing
programme.
Once this option is selected (indicator light illuminated) it will
remain active also for the following washing programmes.
With the use of the "3 in 1" function, the cycle durations may
change. In this case, in the digital display, the indication of the
running time of the programme is automatically updated.
NOTE: Once the programme is running, the "3 in 1" function
can NO longer be changed. If you want to exclude the "3 in 1"
function you have to cancel the programme setting (see
chapter "Starting a washing programme" - "Cancel a washing
programme in progress") and then deactivate the "3 in 1"
function.
In this case you have to set a washing programme (and
options) again.

Activation/deactivation of the "3 in 1" function
(The dishwasher must be switched off)

1. Press the On/Off button. The On/Off indicator light
illuminates (setting mode).If a programme button indicator light is on, this means that a washing programme is set. The programme must be cancelled: press simultaneously function buttons 2 and 3
for about 2 seconds. All the indicator lights will turn off (except for the On/Off indicator light and eventually salt and rinse aid indicator lights) indicating that the set programme has been cancelled and the machine is now in setting mode.

2. Press simultaneously function buttons 2 and 3, until the
indicator lights of function buttons 1, 2, 3 and 4 start
flashing.

3. Press function button 4, the indicator lights of function
buttons 1, 2 and 3 turn off while the indicator light of function
button 4 goes on flashing.

4. Press function button 4 again, the "3 in 1" indicator light
illuminates, indicating that the "3 in 1" function is active.
To deactivate the function press function button 4 again, the
indicator light turns off.

5. To memorise the operation, switch off the dishwasher by
pressing the On/Off button or wait about 60 seconds after
which the dishwasher will automatically return to setting
mode.

Dado

Aug 29, 2016 | Zanussi Dishwashers

1 Answer

Why would my 93 F-Series break lights not work, but the turn signals do?


First check brake bulbs. If they are okay check fuses, the fuses are probably on a different circuit to your indicators. If the fuses are okay then next check that the brake light switch is functional, it is attached to the top mounting point if the brake pedal probably. The fault is almost certainly one of these, there is not much else to go wrong

May 26, 2015 | Cars & Trucks

1 Answer

Indicator light comes on when breaking


check your fuses first.but check the indicators are working first .then check for codes.as it can be break in the wire ,bad hazard switch .or bad indicator switch .or bad relay.need to test each part first.

Nov 26, 2012 | 2003 Renault Clio

1 Answer

Hello I saw the break alert light lit on my


Usually when th fluid level low light comes on, it is because the fluid is ging to the front calipers to fill the pistons that push the brake pads against the rotors. This is because the pads are worn down and probably need replacing.

As for the 3 beeps, it is not related to the brakes.

if it is 5 beeps, it is the air bag or pretensioner.

When the ignition is cycled (turned off and then on), the air bag indicator will remain lit for six seconds and then go out. If an SRS fault exists, the air bag indicator will then flash the two-digit LFC. The air bag indicator will flash the LFC five times, then it will remain illuminated for the rest of the key cycle. The RCM will also communicate the current and historical DTCs through the data link connector (DLC), using the scan tool. If the air bag indicator does not function, and the system detects a fault condition, the RCM will signal the GEM to activate an audible chime. The chime is a series of five sets of five tone bursts. If the chime is heard, the SRS and the air bag indicator require repair.

Mar 02, 2010 | 2002 Ford Ranger Regular Cab

1 Answer

RESETING THE FULL ABSORBER


Waist reset code

1) With the printer turned off, hold down the RESUME button and press the POWER
button (the green indicator lights and the desired service function can be selected).
2) While holding down POWER button, let go of the RESUME button and then press the
RESUME button twice in succession. Then let go of the RESUME button and POWER
button.
(Each time you press the RESUME button, the indicator's color toggles between orange
and green.)
3) During printer initialization, the green indicator blinks. When the green indicator
stops blinking and remains on, press the RESUME button the stipulated number of
times to execute the desired service function listed below.
(Each time you press the RESUME button, the indicator's color toggles between orange

press 4 times indicator light should be green, this Clears the waste-ink counter.

4) After selecting the service function, press the POWER button. The green indicator
lights and the service function will be executed.
(After the respective function is executed, the printer returns to the service function
selection mode.)
To cancel printing after it begins, press the POWER button.
The Power lamp will blink for a while and then stay lit. You can then select
another service function.

Oct 22, 2009 | Canon Office Equipment & Supplies

1 Answer

Honda Accord 2000 (v6) break indicator light stays on


It may be on because the fluid level is low, fill it a little. I should be a DOT3 or DOT4 brake fluid,

Sep 06, 2009 | 2000 Honda Accord

1 Answer

Changing light after installing new water filter


Water Filter Status Indicator Light
(select models)
The Water Filter Status Indicator Light serves as a
reminder to replace the water filter. A green light
indicates that the filter is in good condition. A red light
indicates the filter should be changed. Once light turns
red, it will remain red until function is reset.
To Reset Indicator:
• Press and hold both the LOCK and WATER
buttons simultaneously for four seconds. The
green filter status indicator light will flash
three times when the function has
successfully reset.

Aug 12, 2009 | Jenn-Air 21.6 cu. ft. Side-By-Side...

1 Answer

No break lights, need location of fuse for the break lights 2000 ford windstar


please rate if this helps.

Exterior Lighting The exterior lighting outputs are zone controlled by the front electronic module (FEM) and rear electronic module (REM) in respect to the front exterior lights being controlled by the FEM and the rear exterior lights being controlled by the REM. An additional function of the lighting system is a lamp outage function which provides the indication to the driver if certain exterior bulbs are not functioning. With a bulb inoperative, the FEM or REM will send a message to the instrument cluster and message center (if equipped) which will in turn indicate to the driver the lamp is inoperative with a lamp out indicator (with the message center a message will be displayed). To provide complete input and output functionality, each exterior lamp feature will be described individually. All exterior lighting is powered by the switched system power (SSP) feature (refer to Switched System Power[SSP]). A failure of all or any of the SSP features will cause inoperative exterior lighting. When diagnosing exterior lighting, it is essential to determine if all related symptoms and DTCs are controlled by the SSP feature.
Stoplamps Brake lighting is controlled by the REM. The brake pedal position (BPP) switch is hardwired to the REM. When the brake pedal is depressed, the BPP switch will input information to the REM. Then, the REM will process the information and output to the left, right, and high mounted stoplamps. Only the left and right stoplamps will provide lamp outage indication.
The vehicle's electronic functions are divided into zones. The FEM controls the front portion of the vehicle and the REM controls the rear portion of the vehicle. These systems rely heavily on the SCP communication network in order to transmit and receive signals. As a technician it is very important to understand:
  • where the input (command) originates from
  • All information (messages) necessary in order for a feature to operate
  • which module(s) receive(s) the input or command message
  • does the module which received the input (message), control the output of the feature, or does it output a message over the SCP communication network to another module
  • which module controls the output of the feature
Switched System Power (SSP)
The SSP is invoked by both the FEM and REM. This function removes power from relays that provide power to the exterior lamps, interior lamps, and power door locks. This is only accomplished when both the FEM and the REM are in sleep mode. The sleep function of the FEM and REM places the modules in sleep mode when the ignition switch is in the OFF position, and no wake up (inputs) signals occur for 30 minutes. The module will not sleep if the parking lamps or the hazard lamps are active. The following relays are controlled by the SSP function: SSP1, SSP2, SSP3, and SSP4. When either the FEM or REM are not in sleep mode, all SSP relays will be energized. When energized, each relay will supply power to multiple features/functions. For additional information, go to the SSP Index for diagnosis and testing of SSP related issues. Refer to Headlamps .
Inspection and Verification
  1. Verify the customer concern by operating the stoplamps.
  1. Visually inspect for obvious signs of mechanical and electrical damage.


Visual Inspection Chart Mechanical Electrical
  • Damaged REM
  • Blown central junction box (CJB) Fuses:
    • 13 (15A)
    • 7 (15A)
    • 12 (20A)
    • 11 (10A)
  • Damaged wiring harness
  • Loose or corroded connections
  • Damaged BPP switch

Apr 24, 2009 | 2000 Ford Windstar

1 Answer

Break light/indicator light


Your indicator bulb has blown. If you replace the bulb, you would find it will go back to normal.

Nov 12, 2008 | 2003 Mitsubishi Lancer

2 Answers

Dashboard light on not sure it's meaning


Hello!

A sign like this 30450c7.jpg indicates that your parking brake pads(shoes) are worn, and are in need of replacement.

A sign like this 937110c.jpg indicates that there is problem with the ABS system (can be anythig from a faulty wheel speed sensor to a burnt out fuse)
A non functioning ABS could bring the tires to a lock up during extreme braking which could be rather dangerous.

Hope this helps!

Aug 14, 2008 | 2003 BMW 325

Not finding what you are looking for?
1979 Yamaha RD 250 Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...