Question about 1990 Suzuki Rg 250

1 Answer

Just bought a new stator for my quad to wire a light too.the stator has three wires coming from it.can you tell how to wire a halogen light to it.the stator has one black wire and two yellow wires.the light has one black and one white wire coming from it

Posted by on

  • rigger094 Jul 15, 2010

    thank you very much


1 Answer

The black wires are ground wires so they would go together. The halogen light has a white wire and this will connect to one or both of the yellow wires. To find out what yellow wire to connect it to, use a multimeter to test it out for continuity. Turn the ignition on and find out which yellow wire has power coming through it, touch the multimeter probe to the wire. Connect the yellow wire that has power to the white wire

Posted on Jul 15, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What do I do with the red wire on a Brinks Halogen Motion Sensing outdoor security light

Please perform these connections with the mains power off.

The standard is the Black wire is hot, the White wire is neutral, and the Red wire is switched. For your Sensor connection 120V is connected Black to Black and white to white while the Load is connected White to White and Black to Red (assuming your load is using standard color coding.
Here is a simple diagram for your connection.


Mar 01, 2015 | Electrical Supplies

1 Answer

King quad stator replacment

simple to do, the wires are easily positioned for connection. Just remove the mount screws and wire connections and pull it out.

Jun 23, 2012 | Motorcycles

1 Answer

How to check stater on 1992 honda shadow

Locate the wire harness coming out of the stator on the left crank case cover of the motor and follow it to the plug with three yellow wires. This is the stator plug. You should have continuity between any combination of the three yellow wires, but no continuity between any of the yellow wires and ground. If the stator yellow wires are grounding you will have to replace the stator. To replace the stator remove the left crank case cover and unbolt the stator from the inside of the cover. Do not forget to purchase a new left cover gasket with the new stator or you will just delay your riding.

May 06, 2011 | 1992 Honda VT 600 C Shadow

1 Answer

Charging sys test 1982 honda gl1100

Locate the wire harness coming out of the back of the motor and follow it to the plug with three yellow wires. This is the stator plug. You should have continuity between any combination of the three yellow wires, but no continuity between any of the yellow wires and ground. If the stator yellow wires are grounding you will have to replace the stator. To replace the stator you have to remove the motor from the frame or at least unbolt the motor and rotate it enough to remove the rear cover and unbolt the stator.

May 01, 2011 | Honda GL 1100 Innerstate Gold Wing...

1 Answer

Removed the switch plate and connected the two wires going into the dimmer box and the lights still dont come on. I as thikning by bypassing the dimmer the lights should still function. What else could be...

Hi Jay,
Ive suspect that there's a problem in the main line of the wiring. Since four halogen bulb are already replaced with a new bulb and bypassed the dimmer switch concentrate now on the wiring and the main panel board. Look for a tripped/busted breaker on the box, reset it.Replaced if busted. If nothing works, you need to check the wiring on the ceiling for open.
Hope it may help you.
Have a nice day!
Thanks for using fixya.

Feb 04, 2011 | Lutron ELECTRONICS MAW-600H-LA SMART...

1 Answer

2000 shadow. brand new battery but it won't stay charged. bike starts and runs well otherwise. 600 cc shadow

Locate the wires coming out of the motor. There is a plug with three yellow wires, check the three yellow wires coming out of the motor for continuity. Any combination of the three yellow wires should have continuity. But there should be NO continuity between any of the three wires and ground. If any of the yellow wires are grounded you have a bad stator. If the stator checks good you probably have a bad voltage regulator/rectifier.

Jan 22, 2011 | Honda VT 600 CD Shadow Motorcycles

1 Answer

Stayter going to voltage reg 3 wires go to what on reg

The stator only has two wires if it's an original stator. The pigtail from the stator has two wires inserted into a round plug, The regulator has three wires. There should be two short wires and one long wire. Or , two smaller wires and one larger wire. The two shorter, smaller wires go to the stator, The longer, larger wire goes to the battery from the regulator.

If your stator has three wires coming out of the engine case, it is probably a 3-phase stator which is available aftermarket. It take a special voltage regulator for this type of stator. That voltage regulator will have four wires coming from it.

Good Luck

Aug 14, 2010 | 2003 Harley Davidson FLSTF Fat boy

1 Answer

Cx500 not charging

First have your battery load tested at a dealer. If the battery is good find the plug that comes out of the back of the motor that has three yellow wires coming out if it. You should have continuity when you check any combination of these three yellow wires. You should have no continuity between any of these wires and ground. No continuity between the yellows( even if just one pair) or continuity between yellow to ground means you need a new stator. If the stator is good you probably need a regulator/ rectifier.

May 23, 2010 | 1980 Honda CX 500 A

1 Answer

1997 trx 250 honda.rewiring a new plug on the stator

Hi the three yellow are all the same, they are the alternator wires, are connected to a common star point, so will not matter as long as they are going to the 3 yellow on the other side of the plug.
As a quick test of the stator, any pair of these yellow should produce the same resistance, none of them should have continuity to ground, and any pair with the engine running should produce similar AC voltage, maybe 40-50v

May 04, 2010 | Cycling

2 Answers

2000 honda cbr929 i have a new alternator but the end has a plug on it the other end the plug was cut off . i have three wires on each end ant they all are yellow do the have a sequence and if not the bike...

trace your wires coming into the batery from your stator if the wires arent grounded than i would think that you could hook them up and they would charge but i think you have a ground coming off the stator that has to be hooked up look up wiring schematics for your stator to the battery and go from there

Mar 08, 2009 | 2000 Honda CBR 929 RR Fireblade

Not finding what you are looking for?
1990 Suzuki Rg 250 Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts


Level 3 Expert

75822 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides