Question about 2000 Husqvarna SM 610

1 Answer

Husqvarna 1999 610 replacement frame

I have the chance to buy, a Husky 610, vin number ZCGH7O1AAXV###### right hand kick and electrig start. It hpi's ok as it was'nt insured or road registered when damaged so not recorded and been left to rust, but the forks wheel etc are un-usable. Can you see where this is going?. An engineer pal said the headstock has twisted/ bent and doubts it can be straightend and it would be cheaper to source a frame off ebay, not that easy, i now find. I can buy the bike where £400 for a frame is cost effective. So my question is, will any other frame be suitable? ie. a 95-98 TE etc. Would love to see it back on the road and have me heart set on it as a project .

Posted by on

  • Sean Jul 15, 2010

    ok electric start ooops! cant spell but ok with a spanner honest .

  • Sean Jul 16, 2010

    Thats good advice,thank you. But im wondering if im limited to a 1999-2000 sms610 frame or will other models and/or years be the same?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,567 Answers

Your best bet to find a used frame, is to Google motorcycle salvage Husqvarna and see what you can find.

Posted on Jul 16, 2010

  • tombones Jul 16, 2010

    Frames change on occasion. Usually the changes are minor i.e. fender mounts, battery mounts, etc.. Unless the changes are major, any good commercial welding shop can reposition mounts. Chances are a frame within 2 years of your bike will work okay. As always, "buyer beware". Be sure you know what you are getting before you buy.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kick start husqvarna wr 360 2000 mdl snapped off completely can i use ktm kickstart for this ??


Hi, Dan for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
2000 Husqvarna CR 250 WR 250 360 Workshop Service Repair Manual DOWNLOAD...
Husqvarna Motorcycle Parts Fiche Husky Part Numbers
Husqvarna WR 250 2002 Owner Manual

Dec 26, 2016 | 2000 Husqvarna WR 360

1 Answer

Location of all vin numbers on bike and engine. ?


The vin number commonly known as the frame or chassis number can be found on the front tube of the frame, headstock to the righthand siide at this point the steering yoke is affixed, if this is a uk bike the vin plate should be on the righthand of the frame also,close to your. Right knee when you sit on the bike, but the number on this plate is the same as the one found on the frame, the engine number is located also on the right hand side ontop of the crackcase just above the clutch cover, all of this information can be found on the log book, or registration doc if you have one hope this helps

Jul 26, 2011 | 2008 Suzuki GSX-R 600

1 Answer

I have recently bought YZF 125 from a friend that's been given a 5 year custodial sentence, i had it hpi checked and got the all clear but there is a problem i bought it without a log book. I cant order...


it is usually on the frame at the side where the handle bars are, just under neath them where the bolt is, should be a long nyumber, like mine starts with JC20 :)

Aug 01, 2010 | Yamaha YZF-R125 Motorcycles

1 Answer

2000 Husqvarna SM 610 S has excessive engine vibration


Hi, Anonymous and the usual suspects are:
1. Wheels and or tires worn or damaged.
2. Engine/transmission/vehicle not aligned properly.
3. Primary chain is badly worn or links too tight as a result of insufficient lubrication or misalignment.
4. Engine to transmission mounting bolts loose.
5. Upper engine mounting bracket loose.
6. Ignition timing incorrect due to a poorly tuned engine.
7. Internal engine problem flywheels or balancers have shifted.
8. Broken frame.
9. Stabilizer links worn or loose.
10. Rubber mounts loose or worn.
11. Rear fork pivot shaft nuts loose.
12. Front engine mounting bolts loose.
13. Worn out or broken universal joint on shaft drive models.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Husky SM610 Sudden Vibration
http://www.cafehusky.com/threads/610-counterbalancer-vibrations.23472
Husqvarna Motorcycle Parts Fiche Husky Part Numbers
Husqvarna SM 610 Workshop Manual
Husqvarna TE 610E Owner Manual

Jul 01, 2017 | 2001 Husqvarna SM 610 S

1 Answer

Three Husqvarna parts needed


Have you tried your friendly neighborhood Husqvarna dealer? We are not a parts supplier. You seem to have part numbers. I will gladly provide a link to where you can find IPLs for your equipment and verify part numbers. If you use your local Husky dealer there are no shipping and handling fees, he might have the parts on hand, and because he is an authorized outlet there will be no warranty issue should the need arise.
HusqvarnaUSA.com (45 about 6 pages in, did not try the mower, should be there too)
http://www.husqvarna.com/us/homeowner/support/download-manuals/
Enter the 3 digit model number (no XPs, Es, just the numbers)
Serial number decode – useful when downloading IPLs and Manuals
06 1500198
06 = year produced – 2006 (single digit before 2000)
15 = week produced - March
00198 = 198th unit Husky produced that week
Good Luck Howard HTH
Lou

Feb 06, 2010 | Husqvarna Garden

3 Answers

New 445 husqvarna chainsaw will not start


Drain the fuel tank, look inside the tank to ensure that the fuel line inside still has a fuel filter attached to it.
Look at the on/off switch ensure that both the wires are still attached to the switch securely.
Check that the plug still has spark, if unsure replace the plug.
Check the air filter to ensure that it is clean.
Mix the gas 50:1.

Sep 17, 2009 | Husqvarna Garden

2 Answers

Ive just bought a husqvarna 34 husky is this the model number 34? its serial number is 016810 but i cannot find details of it anywhere an want a manual can you tell me mixture also its my first chainsaw,...


Get Chain lube for the chain oiler. Naturally, husqvarna recommends that you use "genuine husqvarna" oil for your mixture, I recommend a quality oil, doesn't have to be husky. Husqvarna recommends a 50:1 ratio, other manufacturers, of vertually all 2 cycle power equiptment use a 40:1 ratio. This mixture is slightly richer, but will not hurt your chainsaw. May produce a bit more smoke. Not sure what a 34 husky is...neither is Husqvarna, I visited the website and even tried to download a manual. Looked at every husky model, no 34.

Jun 21, 2009 | Husqvarna "Chain Saw - 16" Bar, 3 Hp

2 Answers

I need the instruction manual for a Husqvarna 1050 sewing machine


Checking with an authorized Husqvarna Viking dealer. They should be able to order a replacement manual from Viking for you. Check Husqvarna Viking website for dealer closest too you.

Mar 21, 2009 | Husqvarna Viking 1

2 Answers

Does 610 electric start engine fit in 610 kick start only frame


Hi,

It can be done, but will cost an arm and a leg. The main casings will have to be replaced. This means the motor will have to split and rebuit.
I would suggest that you give the motor a good service. This means doing the shims as well.

This is a good motor, and generally do not suffer from starting issues.
If you stuggle, let your local dealer do the necessary servicing.

Cheers
Jon

Feb 13, 2009 | 2000 Husqvarna TE 610 E

Not finding what you are looking for?
2000 Husqvarna SM 610 Logo

192 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Experts

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

venugopal durairajan

Level 3 Expert

464 Answers

Are you a Husqvarna Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...