Question about Motorcycles

Open Question

2002 kawasaki klx 110. Kick starter will not engage the engine. If i push the kickstarter by hand it will catch but when enough presure to start it is applied it seem to "slip" and doesn't turn the engine over although i can hear "something" spinning inside.

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 2336 Answers

SOURCE: How fast will a Kawasaki KLX 110 go?

Well it depends but it should be able to get up to about 45 mph. However, if u put the 4th gear in it can go maby 50. You can also put some parts in to give ur bike a little more kick

Posted on Nov 10, 2008

Ad
  • 73 Answers

SOURCE: kawasaki klx 110 repair manual

http://www.cyclepedia.com/kawasaki-klx110-online-service-guide/
toughest motorcycle on the planet Ok maybe a xr 50
did you Know that it actualy has a four speed gear box? all you have to do is chang the shift can and you will get fourth gear ....complete engine disassembly required Good Luck ride safe

Posted on Oct 14, 2009

  • 1 Answer

SOURCE: what kind of oil goes in my kawasaki 110 KLX and

you want super 4t for your bike and ion the sight glass it should be full. it will start but it has a chance of siezing if the oil is to low but if its to high it wownt start.
hope this helps.

Posted on Dec 17, 2009

  • 4102 Answers

SOURCE: kick starter has no compression, will not shift

hi, will the shift lever shift up when the bike is being pushed along, is it stuck in neutral, if its in neutral then push it down make sure it goes into 1st gear then can u get someone to push u whilst holding the clutch in then release the clutch and see if you can jump start the bike that way.

when you push the kick start down is it turning the engine over properly and if so if the compression is really to low then the chances are the piston ring has broke and scored the side of the cylinder if this is the case then you need to get new piston and rings and a new cylinder.

The problem with moto x bikes is they are high power and work at really high temp so parts need changing more often the piston rings need changing every 25 to 35 hours of riding time you need to do this as they ware and brake if used any longer.

you also need to make sure you get the petrol and oil mixture spot on as if its not getting enough oil it will blow the piston and rings so you need to measure exactly the correct mixture.

these bike are expensive to maintain and need new parts on a regular basis so remember this the next time you get the bike running

Posted on Mar 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2011 KLX110L electric start wont work


Have you tried sqeezing in the clutch lever while hiting the start button?

Rob

Mar 26, 2014 | 2011 kawasaki KLX 110

1 Answer

Engine starter bendix


check to make sure all the mounting bolts are tight. If it has a kickstarter i would use that instead of the electric start

Jan 07, 2014 | 2011 kawasaki KLX 140

1 Answer

Where should oil be in the sight glass w/engine warm on a 2002 Kawasaki kxl 110?


you will see two lines at the top and bottom of the sight glass, oil needs to be between these lines with the bike held level, use motorcycle 4 stroke engine oil from a bike shop, car oils can make the clutch slip

Sep 25, 2011 | 2005 kawasaki KLX 110

1 Answer

The bike will not shift into gear. The clutch has plenty of spring tension just will not engage


if the bike has been sitting for a while the clutch plates can stick together, you will still feel spring tension from the pressure plate. two ways to free it up.
with the engine stopped click it up into top gear, put the front wheel against a wall, pull in the clutch, and push on the kick start, or push start it in gear, pull in the clutch and vary the throttle .
Change the oil after the ride with good motorcycle engine oil.

Apr 26, 2010 | 2003 kawasaki KLX 125

1 Answer

Kick starter has no compression, will not shift


hi, will the shift lever shift up when the bike is being pushed along, is it stuck in neutral, if its in neutral then push it down make sure it goes into 1st gear then can u get someone to push u whilst holding the clutch in then release the clutch and see if you can jump start the bike that way.

when you push the kick start down is it turning the engine over properly and if so if the compression is really to low then the chances are the piston ring has broke and scored the side of the cylinder if this is the case then you need to get new piston and rings and a new cylinder.

The problem with moto x bikes is they are high power and work at really high temp so parts need changing more often the piston rings need changing every 25 to 35 hours of riding time you need to do this as they ware and brake if used any longer.

you also need to make sure you get the petrol and oil mixture spot on as if its not getting enough oil it will blow the piston and rings so you need to measure exactly the correct mixture.

these bike are expensive to maintain and need new parts on a regular basis so remember this the next time you get the bike running

Mar 01, 2010 | 2005 kawasaki KLX 110

2 Answers

My drz 110 makes a ratcheting sound and wont turn over


the main shaft has broken and possibly the first gear and right engine case. Common problem.

Jan 06, 2010 | 2005 kawasaki KLX 110

3 Answers

I have a ktm 640lc4 (2002) it has a leaver in front of the clutch leaver. what is this for?


Is it a kick start or does it have a kick starter in addition to the electric start? If so then it is a decompression lever which you pull in when you are trying to start the bike by kick start. Hold in the lever and try the kickstart vs not holding the lever. You'll feel a huge difference.

Dec 03, 2009 | 2002 KTM LC4 640 Adventure

1 Answer

My starter is stuck. there is no movement in the


You are going to have to pull the right case cover and look at the kick gears to see what is going on. This is no adjustment. There will be a spring or two and possibly a gear that will need to be replaced.

Jun 25, 2009 | 2007 kawasaki KLX 110

1 Answer

How fast will a Kawasaki KLX 110 go?


Well it depends but it should be able to get up to about 45 mph. However, if u put the 4th gear in it can go maby 50. You can also put some parts in to give ur bike a little more kick

Nov 10, 2008 | 2007 kawasaki KLX 110

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

380 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...