Question about 2008 kawasaki Ninja 250R
Posted on Jul 13, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
if there is no free play when pulling the lever in, the bike will most likely take off from first gear, but when you throttle it, the clutch will most likely slip. if the lever is to loose, lots of free play, you may have a hard time getting it in gear. approx 1/4 inch free play with the lever and it will work normal... unless its ready for a new clutch. hope this helps...
Posted on May 27, 2009
when you see the velly of the bike, you could find big hole cap which is oil filter. Take it off and replace it. Next to the cap, there is a bolt same size as the cap bolt which is oil tank cap bolt. When you screw the bolt, the oil will plow out. Let it plow untill done. Put the bolt back when it empty. Right side of the bike and middle of the foot fade, you could find a refill cap. Replace oil untill the oil fill up enough. Back side of foot fade, There is a oil check. Between full and poor would be fine.
Posted on Jun 13, 2009
Tips for a great answer:
Feb 23, 2017 | kawasaki Ninja 250R Motorcycles
Nov 20, 2016 | 2009 kawasaki Ninja 250R
Jul 10, 2011 | 2010 kawasaki Ninja 250R
May 03, 2011 | 2008 kawasaki Ninja 250R
Apr 28, 2011 | kawasaki Kawasaki Ex250f14 Ninja 250r...
Mar 21, 2010 | 2008 kawasaki Ninja 250R
Jul 02, 2009 | 2008 kawasaki Ninja 250R
Jun 13, 2009 | 2008 kawasaki Ninja 250R
385 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: