Manufacturer recommends "Suzuki Performance 4 Motor Oil" Any SF or SG rated oil under the API service classification will suffice. 10W-40 is the recommended viscosity.
If you can not get 10W-40, the following are acceptable:
14 to 104 degrees F 20W-50
0 to 104 degrees F 15W-40 or 15W-50
-4 to 104 degrees F 10W-40 or 10W-50
-4 to 86 degrees F 10W-30
Temperatures indicate ambient air temperatures operated in.
SOURCE: how many quarts of oil go in a 2001 suzuki
Oil change : 2.4L ~ 2.5 US qt ~ 2.1 Imp. qt
Oil change with filter change: 2.8L ~ 3.0 US qt ~ 2.5 Imp. qt
Oil capacity after engine overhaul : 3.3L ~ 3.5 US qt ~ 2.9 Imp. qt
Oil quality: SAE 10W-40 API grade SE or SF
SOURCE: Crankcase capacity on 2002 Suzuki VS 800
Use 10w40 motor oil in the gear box. Don't use any synthetic lubricants, oil marked "EC", or oil with "special" additives. Stick with the major brands; Pennzoil, Quaker State, Mobil or Shell. If in a hot area like Texas or New Mexico go with 20w50.
I don't have a service manual on your particular bike so just check oil quantity with the dealer when you go to buy the new oil filter. Don't forget to lube the cables and chain when doing the oil change.
SOURCE: Need to change the oil
Hi, the oil you need for vs800 gl is 10 W 40 grade is SF andthe quantity in litres is 2.8 you could use a KN oil filter available at most outlets
Testimonial: "Thanks for the info. "
SOURCE: How much oil is needed
It looks like it will take 3.8 qts, with filter, 10W40
I’m happy to help further over the phone at https://www.6ya.com/expert/al_e83b1941f9c0f302
1,115 views
Usually answered in minutes!
×