Question about 2000 Harley Davidson FLHTCUI Electra Glide Ultra Classic

1 Answer

My brake light does not work with neither front or back brakes on my electraglide but, my taillight does.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,565 Answers

The bulb has two filaments in the bulb. One filament is for the brake light and the other is for the tail light. You could simply have a bad bulb with one filament blown. Replace the bulb. This is the most likely situation.

Good Luck
Steve

Posted on Jul 12, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Headlights work but not taillights what is the cause and how do i fix it?


First you need to determine if all lights in the back are out or just brakes lights or tail lights. Check fuses, taillights will have their own fuses. Could be a bad dash switch, which would be evident if brake lights work but not taillights.

Aug 25, 2015 | Cars & Trucks

1 Answer

Where is the breaker located for brakelights on a 1993 electraglide


Hi Anonymous, you either have a burned out bulb or a bad connection in the tail light wiring harness. I believe circuit breakers were located under speedometer housing and fuses behind left side panel. Please visit website below for free wiring diagram:
Harley Davidson Wiring Diagrams and Schematics
Good luck

Jan 30, 2014 | Harley Davidson FLHTC Electra Glide...

1 Answer

Volvo s60 brake lights working but taillights not


check fuses, also are the front side lights ok ?

Mar 08, 2013 | 2002 Volvo S60

1 Answer

My 2003 Pontiac Vibe tail lights do not work. The brake lights work. I checked the tail fuse. Turn signals work also. Why no tail lights?


Your turn signal lights and brake lights are the same lights . Question : do the front parking lights work ? The front and rear running lights or parking lights are all on the same circuit and fuse . If the front lights work , and the rear lights don't , make sure the bulbs are good first . If OK , I would suspect the problem is either a bad ground in the rear taillight wiring harness or a bad connection in the rear taillight connector Itself .

Sep 16, 2010 | 2003 Pontiac Vibe

1 Answer

Left taillight doesnt work, neither does brake


you got a bad ground on the taillight circuit

May 12, 2010 | 2006 Dodge Ram 2500

1 Answer

Cannot get taillights to work. Brake lights work,


check the connectivety from the dash to the rear of the vehicle also check for corrosion on the plugs in the bag

Nov 03, 2009 | 1989 Toyota Camry

1 Answer

1998 Chevy Monte Carlo. Brake lights won't work.


you give some good clues. because your third brake light works but not the other two, and because you sometimes get brake lights if you have turn signals on at the same time, i would say that some wires got crossed up with your other taillights. check out the power wires back in the taillight assembly and the wires that run back to the taillights. something is mixed up back there, now you just have to find it. if all else fails after you isolate which wires are the brake light wires get some new wire, same gauge and roughly same length, remove a bit of insulation but don't cut the wire in two, and put the new wire in as an overlay. if having the new piece of wire there makes the brake light work you found the break in the wire. you can cut out the bad piece and fasten the new piece in. you can solder it if you have the equipment to do that, or you can buy some squeeze in place connectors at the car parts store. either way, good idea to tape it up when you are done. hope that helps

May 31, 2009 | 1998 Chevrolet Monte Carlo

1 Answer

Brake lights in rear will not work


Do you have a trailer plug? Look for corrosion around taillight plug under truck in the back, PULL IT APART to see if there is any corrosion. If you find none, than take the taillight housing out and run a external wire from a clean spot on frame to the ground on housing, it could be a ground issue. Did you test light the break light switch power in power out?

Apr 10, 2009 | 1991 Chevrolet C1500

Not finding what you are looking for?
2000 Harley Davidson FLHTCUI Electra Glide Ultra Classic Logo

194 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...