Question about 2004 Harley Davidson FLHRS - FLHRSI Road King Custom

2 Answers

Left turn signal comes on when I turn the ignition then doesn't work

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I am having the same issue on a 2005 FLHRCI Road King Classic. Basically the left turn signal comes on when I start the engine. It will not cancel by pushing the left turn signal button. However, if I push the right turn signal button the left will go off and the right will start blinking. Sometimes, this same action starts all four signals blinking (like the emergency flashers). It is very erratic. I have Kuryakan pancea rear taillights and brake light. The brake light went out so I went a bought a new brake/taillight with a new adapter. Brake lights work now but the blinker problems happens whether the back lights are connected or not. Front turn signals are stock.

Any help would be greatly appreciated.

Posted on Dec 21, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Harley Davidson Expert
  • 291 Answers

Intermittent problems can be the most frustrating thing. This can take a lifetime to solve or a few hours depending on whether fault shows itself when working on bike. More than likely it will be a leaky turn signal switch. Problem caused by owners using pressure washers and power washing the hand controls etc. forcing water into switchgear. Power washers should never be used near electrical parts or wheel bearings as water will be forced passed seals causing corrosion and eventual failure.

Posted on Jun 29, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No left turn signal or indicator


Hi Anonymous, start by checking for continuity at the turn signal switch, then check the wiring harness connector to your turn signal module for corroded, broken or loose pins and the red key light is your security alarm indicator light, for more information on your question please visit the websites below and good luck:
Harley Davidson Wiring Diagrams and Schematics
Harley Diagnostic Codes 04 to Present

Jul 04, 2013 | 2006 Harley Davidson FXDBI Street Bob

1 Answer

2005 Pontiac Grand Prix front left turn signal went out, I replaced the bulb and the light comes on but the turn signal still doesn't work. If I have the lights sent on automatic the right parking


Hey I literally just today had the same problem, put a new bulb in the light was on but did not blink!!!! SUPER EASY SOLUTION, you simply have the bulb in too far. I gently pulled mine out a tiny bit and it started working fine... guarantee that's all that's happening to you!!!

Jan 25, 2013 | 2005 Pontiac Grand Prix

1 Answer

I have a 2005 Harley Road King Custom. With ignition switch on, I have horn, brake lights and instrument light. I don't hear fuel pump, turn signals don't work; headlight doesn't work and


Hi Mark, I would start by checking fuses first located behind the left side panel. Then check for continuity at your system/fuel pump relay also in that same general area, check the connection at the turn signal module and for continuity at the ignition switch and your high/low beam switch. This is assuming of course that your security alarm has been disabled. for more information on your question please visit the websites below and good luck:
Harley Davidson Wiring Diagrams and Schematics
Harley Diagnostic Codes 04 to Present

Dec 10, 2012 | 2005 Harley Davidson FLHRS - FLHRSI Road...

1 Answer

2005 Dodge Caravan right turn signal doesn't work..only the left does??? Help


Simple fix took me five minutes:
1.Gain access to the fuse/relay box thingy under the drivers side dash. It has a black plastic cover and two big black plastic screws, which don't really require tools.
2. turn on ignition and engage turn signal that is not working.
3. There is a module (cube shaped relay thingy at the top right of fuse-relay panel) Move it around, pull out and back in to re-establish connection. If your signal starts up, then that is it.

Nov 22, 2012 | 2005 Dodge Caravan

1 Answer

Rear hazard flashers don't work 1994 Chevrolet Cavalier


Hazard flasher power comes from the 20A S/LP fuse in the fuse block. It is applied to the hazard flasher in the convenience center. Flasher output is applied to the turn/hazard/headlight SWITCH assembly where activation of the HAZARD switch causes flashing power to be applied to the turn indicators and the turn filaments of the front and rear dual park/turn lights. If replacing the fuse doesn't work, trace the power through the circuit. Check for misssing/disconnected ground wires.

Sep 16, 2012 | Chevrolet Vehicle Parts & Accessories

1 Answer

1995 gmc K2500 left and right brake lights come on with ignition turned on. 3rd brake light comes on when you step on the brake 4 way flashers do not work. Ignition turned off 4 way flashers and brake...


I think your trouble is in the turn signall switch, just had the same trouble on my truck. Turn signall switch is about $250 because it is actually turn signalls, wipers, washers, 4 ways, and dimmer all in one.

May 12, 2010 | Cars & Trucks

1 Answer

Left turn signal doesn't work some times.


signal switch replacement is a common issue, i've replaced 5 so far.

Sep 22, 2009 | 1996 Chevrolet Blazer

1 Answer

Left Turn signal stays on


you have a short somewhere in the wiring. it could be a damaged earth and its using the earth for that device, check all earthing points in engine bay usually around were the battery is clean then and see if it happens again

Jun 22, 2017 | 1995 Dodge Avenger

Not finding what you are looking for?
2004 Harley Davidson FLHRS - FLHRSI Road King Custom Logo

404 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...