Question about Motorcycles

Open Question

My 2004 suzuki eiger 400 4x4 wont start just keeps turnin over but will not fire and if it does fire it will not stay idling

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Fuel in the crankcase

it sound like your fuel shut off valve is bad and the needle valve and set may need to be cleaned.

Posted on Mar 24, 2010

  • 2 Answers

SOURCE: backfiring and won;t idle

check the gasket, etc. rubber housing between carb and engine. these will occassionally crack and cause problem you have descriped

Posted on Aug 15, 2009

emissionwiz
  • 75822 Answers

SOURCE: what engine oil do you recommend for 2006 suzuki

this bike uses any major brand 10W40W

Posted on Dec 07, 2009

  • 635 Answers

SOURCE: have a 2004 suzuki marauder. engine starts but

Your idle circuit jet is clogged, you will need to run seafoam fuel additive in your gas tank and see if this clears it up or clean the carbs.

Posted on Apr 04, 2010

  • 149 Answers

SOURCE: '06 Suzuki Eiger ATV will not start. When pushing the

Try shorting out the 2 10mm nuts on the starter relay (has the lead from the battery and starter going to it) if the the engine turns over chech the relay or safety switches. It will flash so make sure the is no open fuel. If nothing happens try tapping the starter motor l(lightly) then try it. If this works the brushes in the starter are worn out..Dont keep on doing it as you will burn the comutator in the starter..Brushes are cheap.

Posted on Jul 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Suzuki eiger starter button doesn't do anything


Hey Brad
With the info you have provided, it seems to point to the ignition switch as the problem. (the clicking you should hear comes from the solenoid contacts - not the starter button). There is probably one wire in the switch that has broken or come unsoldered or other wise not making the right connection.

Jun 12, 2017 | Suzuki 2004 Eiger 400 4X4 Manual

1 Answer

I've got a 2006 Suzuki eiger 400 4wd. I've been rideing it all day, and now it will not start. Even pull start.what could be the issue?


Repair and Maintenance [Archive] - Page 4 - Suzuki ATV Forum

www.suzukiatvforums.com/forums/archive/index.php/f-23-p-4.html
1992 King Quad High Idle Issue · kill switch · quad master 500 wont run · Spark ...2006 suzuki vinson fuel gauge shows empty · 87 LT-4WD L.H cover removal: ... 07 Kingquad 700 Starting and electrical issues · 2002 Eiger 400 won't go into ...

Nov 23, 2015 | Suzuki Motorcycles

1 Answer

Why would suzuki forenza stall at a stop


Turn the ignition and start the Suzuki Eiger. If the engine has difficulty starting or will not start at all, there may be a problem in the electrical or starting system. Remove the spark plug wire from the spark plug and remove the spark plug from the engine using a spark plug wrench. You can replace the spark plug or use a wire brush and gap tool to clean and re-gap the spark plug. Insert and tighten the spark plug, reattach the spark plug wire and try to restart the engine. Remove the battery cables from the battery and attach a battery meter to the battery. Observe the amount of charge the battery is holding and if the meter has a test feature, test the battery to see if it will dispense the correct amount of power. Clean the battery contacts with a wire brush and reconnect the battery cables. Check the oil, gas, transmission and brake fluid levels on the Suzuki Eiger. If there is not enough gas in the ATV, it will not start. Checking the fluids regularly to see if there are any leaks or if any of the fluids are dangerously low. Top up any fluids that may be low before you use the ATV. Adjust the fuel idle mixture screw on the Suzuki Eiger's carburetor if the engine is running rough. Inspect the air intake and exhaust pipe for the Suzuki Eiger. Any blockage in or on these components can affect engine performance. OBD2 PROMOTION FindOBD2 com

Aug 15, 2014 | Cars & Trucks

1 Answer

Suzuki eiger 400


you may have jumped timing and bent a valve

Aug 02, 2014 | Suzuki 2004 Eiger Automatic 400 4X4...

1 Answer

I have an 04 Suzuki Eiger 400. Smokes a lot when first started but subsides a little after running. Im thinking piston rings but would like any other feedback before tearing the top end apart


sounds like piston rings, if rings are in bad shape,will be at its worst when cold then will get better when it warms up. Should be some power loss as well. pretty easy rebuild. good luck

Apr 13, 2014 | Suzuki 2004 Eiger 400 4X4 Manual

1 Answer

Suzuki eiger


The condition is call vapor lock.
Is there any missing heat shield?

======
Use a bottle of yellow HEET dry gas to remove any moisture problem in the fuel.

Jan 15, 2014 | ATVs

1 Answer

110cc suzki wont stay idling


Hi, Mark and the usual suspects are:
1. Idle circuit and transfer ports clogged.
2. Air fuel mixture adjustment too lean.
3. Pilot jet clogged.
4. Faulty accelerator pump.
5. Float level too low.
6. Float bowl contaminated old fuel, water, dirt, rust, etc.
7. Float bowl vent or overflow tube clogged.
8. Fuel flow to carburetor restricted.
9. Intake manifold leak.
10. The gas cap is not venting properly or fuel tank venting system blocked.
11. Vacuum line from intake manifold to petcock broken, cracked, or not attached, carburetor vent line plugged.
12. Needle and seat stuck closed in the float bowl.
13. Multi carburetors not in sync.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
DRZ 110 wont stay running
How to fix dirt bike that wont idle
Kawasaki KLX110 Service Manual
OEM parts for Suzuki
http://mybikemanuals.com/suzuki

Jun 12, 2017 | Suzuki Motorcycles

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

590 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...