Question about 2000 Husqvarna TE 610

1 Answer

My bike idles up and then down all by itself upon starting ittouch the trottle and it gets worse and stalls?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Husqvarna Master
  • 1,508 Answers

The idle up and down can mean there is an air leak as this is a symptom of running lean.
Check the fuel flows freely out of the fuel tap
Check the carb to cover is not coming loose.
Check all the jets in the carb are seated correctly, and not loose and make sure it is clean
Check the inlet manifold and carb clamps

Posted on Jul 17, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Idle adjustment


idle is not adjustable
pcm decide the idle rpm by iac valve
try to clean trottle body plate and iac hole with combustion chamber cleaner and pour the rest at the trottle body engine idle enough not to stall engine

Oct 11, 2013 | 2007 Chevrolet Impala LS Sedan New Cars

1 Answer

So i've recently run into a problem where the bike


If it was a two cycle I'd say it was clogged exhaust ports. But you have a pretty exotic bike. So I guess it's a timing issue dealing with the exhaust Ox sensors.

Aug 30, 2012 | Cars & Trucks

1 Answer

It will stall out when at a stop. When taking off I have to roll the trottle back and forth and pop the clutch. after driving the for about 5 miles, then it starts to stall out when stopping and taking...


If your bike is stalling out when the engine is cold, this is typical of a carburetor equipped engine. You need to run a little longer with your enricher on. After it warms up, if it's still stalling out, remove the outer air filter cover and look at the upper right of your carb. There is a screw there. This is the throttle stop screw. Turn it clockwise to increase the idle speed. Set the idle speed when the engine is at full operating temp.

Good Luck
Steve

Feb 25, 2011 | 2000 Harley Davidson XL 1200 C Sportster...

1 Answer

Idle seems to drop to around 250 and sometimes stalls.


it sounds like a idle control valve if you keep your foot on the gas alittle does it stay runningif so does it sound normal if so it probably your idle control valve and to should be on the back of your trottle body also try cleanind the inside of your trottle body with a lint free rag and some trottle body cleaner make sure you open the butterfly and get all that carben out of there sometimes the carben build up will also cause a big drop in rpm.

Nov 09, 2009 | 1997 Jeep Grand Cherokee

2 Answers

400 Eiger ATV, starts and runs fine, stalls the


If 2 stroke check crank seals, check plug cap for proper resistance,check for good fuel flow to carb.Spark should jump at least a 1/4" gap,NOT JUST the .030 or plug gap.

Sep 08, 2009 | 2004 Suzuki DR-Z 400 E

1 Answer

1988 Ford Crown Vic Strange Idle (Getting Worse)


i am trying to install an aftermarket temperature guage with capillary tube into my 1988 crown victoria ltd 5.0 efi. where does the capillary tube mount?

Jun 27, 2009 | 1988 Ford Crown Victoria

2 Answers

My 1992 Nissan Maxima is sputtering upon acceleration. It has 220,000 miles on it and it seems to mainly have this problem in first gear. And mostly happens shortly after starting the car. Ive done a basic...


92 max
I own a 92 max 370 kms runs good but one day just cuts out while doing about 30 km, I pull over i can start it no problem but when I touch the pedal to accelerate the car stalls out.

It got worse to the point of sputtering on the highway , sometimes i could keep it alive by working the pedal but others would slow down and stall out.

I have changed the fuel filter and plugs seemed to make it a bit better but still stalling. I ran it in my driveway for 10 mins on idle then it stalls out

Is this the fuel pump??

Jun 13, 2009 | 1992 Nissan Maxima

1 Answer

2001 ford taurus will not idle down


several things can do this but most likely would be
1 TPS trottle postion sensor = replace
2 stuck butterfly valve inside the trottle body = clean out with trottle body cleaner try to get most of the black build up with a old tooth brush
3 bad trottle cable= feel the cable make sure it moves freely if not replace it

Feb 20, 2009 | 2000 Ford Focus

Not finding what you are looking for?
2000 Husqvarna TE 610 Logo

Related Topics:

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

venugopal durairajan

Level 3 Expert

464 Answers

choprboz5

Level 2 Expert

196 Answers

Are you a Husqvarna Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...