Question about Motorcycles

1 Answer

It is a 98 kx60 it is really hard to start and it dosent seem to have any power up high or down low.is this because it needs a new top end?

Posted by Anonymous on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 345 Answers

Yes. You need a new top end. Being very hard to start, and having no power, sounds like you have no compression left. You need a new Piston Kit. Wiseco make one for your model.
This is a very high reving little bike, the piston and rings in them dont last very long.

Posted on Jul 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

L200 low power no lights on dash


This could be many things, but start with the simple ones. Test ignition module as they have two sections, one for low rpms and one for high. Check for restricted exhaust, clogged cat converter or muffler. Check for correct fuel pressure AND delivery.

Jan 16, 2015 | Cars & Trucks

1 Answer

98 gmc 2500 intermittent starting 7.4l engine. started one day went to store now wont start, went under it seems the starter kinda clunks once and does nothing, its like the starter drive engauges but does...


There are only two problems with electrical circuits. Too much amperage or too little amperage.We have to determine what you have.
An excellent test is to put your test meter red lead on the positive battery post and the black lead on the negative battery post. Crank the engine and record the voltage. Then place the red meter lead on the starter's battery terminal and the black lead on the negative battery post. Again crank the engine and record the voltage. The two voltages should be with in one half volt of each other. If the voltage difference is greater that one half volt, there is a resistance in the circuit, somewhere. I would expect the voltage to drop a volt or two, max
If the voltage dosent drop, there is high resistance resulting in low amperage. If the voltage drops too low then there is low resistance resulting in high amperage.
High resistance=dirty terminals
Low resistance = shorted wire, slow turning cranking motor maybe caused by bad starter, bad battery or hard to turn engine. ( engine bad, alternator or power steering pump bad, a/c pump bad, etc)
Can use head light for test. Turn on lights and note the brightness. Crank engine. If while cranking, the lights stay bright= high resistance.
If lights go dim = low resistance.

May 01, 2010 | 2005 GMC Sierra 2500HD 4WD

1 Answer

98 caviler low beam


98 caviler high beam left side dosent work canged bulb checked fuse and all good

Feb 06, 2010 | 1998 Chevrolet Cavalier

1 Answer

98 galant 2.4 engine speed uncontrollable after 1600 rpm


check automatic idle speed motor if equipped.

Jul 07, 2009 | 1998 Mitsubishi Galant

1 Answer

Ac dosent cool down checked psi is really high if


need to replace dryer and the orifce tube vachum down and recharge, you have contamination in your system.

Jun 28, 2009 | 2002 Dodge Grand Caravan

1 Answer

Losing power 98 TJ wrangler


Sounds as if converter on exhaust is getting plugged up. have it checked and replaced. That will force exhaust out ahead of it where ordinarily it would flow with less pressure. Oil leak is a separate item.

Jun 28, 2009 | 1992 Jeep Cherokee Sport

1 Answer

It is really hard to make turns. check power stering fluid ok


check power steering fluid if real real low you have a leak at hoses or pump seals.if all is good check for low tires and lack of lubrication to at ball joints and tie rod ends. if all is good you have power steering pump failure.

Apr 22, 2009 | 1998 Plymouth Voyager

2 Answers

98 volvo S70 low beam bulb replaced still no light


Easiest way would be to go back to where you bought it and make sure the bulb is installed that you bought....and show them. Ask if you can get a new bulb and change it in front of him. Call the dealership and talk to parts, ask if, indeed the hi and lo are interchangeable.

Mar 12, 2009 | 1998 Volvo S70

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...