Question about 1990 Honda Pacific Coast

1 Answer

Hi, My 1990 Honda Pacific Coast has just been repainted and I have installed LED driving lights. After every thing has been put together the Tachometer doesn't work. Every thing else appears to be functioning okay. Have you any hints what my problem might be. Thanks John D hackett

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,917 Answers


Most probably the tachometer cable is the cause of the problem. It could be broken, rusted or corroded, loose at either end, or some other problem with-in the tachometer.
Make sure the wire connections are clean and free of corrosion, or the unit is shot. pop it out and check the connections, just follow the wires

Let us know if you have something more to know else accept the suggestion.
Thank You for contacting

Posted on Jul 07, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Honda vt1100 fuel filter location

Hi, Anonymous for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Honda vt1100 fuel filter location Google Search
Fuel filter change on your Honda Pacific Coast
Honda shadow vt1100 Owners Workshop Manual
Honda VT1100C2 Owner Manual Page 3

Jan 27, 2013 | 2004 Honda VT 1100 C2 Shadow Sabre

1 Answer

89 pacific coast honda need to install choke cable how do i get the cables hooked into the carb?

Hi, Vccansler sorry you can't find the first and best tool you ever bought for your Honda despair not for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
PC800 carburettor tear apart Not Your Average Engineer
PC 800 Service Manual
PC 800 Owner Manual

Sep 11, 2011 | 1991 Honda Pacific Coast

1 Answer

Upon starting, left float bowl leaks fuel onto floor. What is float level; I do not have a gauge.

the float level is set with the carb on the bench float should be level with carb body above needle and seat you may nave abad float remove and shake to see if it has gas in it i would also recomend changing the needle and seat due to the age of bike

Feb 04, 2011 | 1990 Honda Pacific Coast

1 Answer

Lost manual of 1989 Honda Pacific Coast Where is the fuse box located ? Thank you

Brother, the fusebox is located under the small left air-duct cover.
Pull it out and locate it at the right above. Slide it off to eight o clock.
The placement of the fuses is only at the bottom of the cover.
Do not lose it and remove the Parking fuse. 2:/

Oct 19, 2010 | 1989 Honda Pacific Coast

2 Answers

1990 honda civic help

sounds like the crank sensor or the coil.Chage the crank sensor firstly m8.Good luck.

Nov 29, 2009 | 1990 Honda Civic

1 Answer


That's happened to me so many times, I've lost count. It's almost always one of two things: a wire shorted to the frame, or a loose wire connection. These two issues are almost always in, or near downstream of, the battery circuit. Good luck.

Jul 07, 2009 | 1989 Honda Pacific Coast

1 Answer

How to change front tire on honda motorcycle

if you lift your bike high enough, you dont have to touch the callipers. maybe just loosen the bolts, thats all.

Jun 21, 2009 | 1989 Honda Pacific Coast

1 Answer

How do you change the alternator on a 1997 honda goldwing motorcycle

hello and welcome
the alternator per say is split up into several components. the stator coil(located in the left crankcase cover) and the rectifier regulator (which is located bolted onto the frame above the stator area. you can identify this by three yellow wires going into it.
either one can be tested the regulator can be tested at a local dealership. and the stator can be tested by reading an ohm meter between either one of its three wires and ground. if any show up with any continuity between the unplugged yellow wires at the stator and ground the stator is at fault. thank you.

Mar 21, 2009 | 1990 Honda Pacific Coast

1 Answer

Width qwestion

26.5 at the front fairing

Nov 10, 2008 | 1991 Honda Pacific Coast

Not finding what you are looking for?
1990 Honda Pacific Coast Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers


Level 3 Expert

74896 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides