Question about Motorcycles

1 Answer

Hi av got a cbr 1000f 1989 and the neutrol light wont come on when you put it in neutrol therefore it wont star up unless i bump it what could the problen be?

Posted by Anonymous on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Contributor
  • 296 Answers

There is a switch that penetrates the transmission housing that makes contact when the transmission is in neutral.

That switch could be bad.
The part that operates that switch might have failed.
The wire to that switch might have fallen off.

Locate that switch, and put an ohmmeter o it — one probe on ground, the other on the switch (after removing the wire). Move the shifter past neutral a few times to see if the meter responds.

If not, take the switch out, and operate it manually to see if it makes contact. Manually ground the wire to the switch to see if the neutral light lights (it should irrespective of the transmission position).

Posted on Jul 06, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Exploded view transmission

seized gearbox most likely , if you have the skill remove motor and check gear selector shafts

Mar 11, 2014 | Honda CBR 1000 F Motorcycles

1 Answer

Problema de temperatura

Hola, An?nimo y los sospechosos habituales son:
1. El nivel de aceite del motor y el peso SAE son demasiado bajos o no circulan.
2. Caudal de aire insuficiente o bloqueado sobre el motor.
3. Dep?sitos de carb?n de c?mara de combusti?n pesada.
4. Tiempo de encendido retardado debido a un sensor MAP, CKP o CMP defectuoso.
5. El carburador est? demasiado fl?cido.
6. Vaciado de la v?lvula de admisi?n o escape.
7. Agua refrigerante viejo o bajo cambio cada dos a?os.
8. Fallo en la bomba de agua.
9. Radiador tapado, tapa suelta o mal funcionamiento.
10. Los ventiladores del radiador no se encienden.
11. Deslizamiento del embrague, frenos que arrastran, carga pesada, remolcando un remolque etc.
12. Lento tiempo sin moverse.
13. Para las temperaturas constantes del clima caliente, la monta?a, o las condiciones del montar a caballo del desierto consideran la adici?n de un refrigerador de aceite y / o refrigerador de la cabeza de cilindro.
Para obtener m?s informaci?n acerca de su problema y las valiosas descargas "GRATIS" que necesitar? para ver o imprimir, haga clic en los enlaces azules a continuaci?n. Buena suerte y tener un d?a maravilloso.
CBR 1000 overheating CBR Forum Enthusiast forums for Honda CBR Owners
Honda CBR1000f Service Manual
Honda CBR 1000F Ownes Manual

Dec 29, 2013 | 1989 Honda CBR 1000 F

1 Answer

1993 Honda CBR 1000 F tail lights not working

Hi, Anonymous tail light issues are relatively easy to diagnose and repair always check the tail light fuse first and make sure you have power on both sides of the fuse holder and the usual suspects are:
1. Tail light bulb element is broken.
2. Tail light bulb soldered contacts are extremely worn down.
3. Tail light bulb socket corroded.
4. Tail light bulb socket has no power and or ground.
5. Tail light wiring harness damaged from the rear tire.
6. Tail light rear fender wiring harness connector faulty due to corroded, broken, or loose pins/sockets.
For more information about your issue and valuable "FREE" downloads that you need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Help rear brake light does not work CBR Forum Enthusiast forums for Honda...
How to CBR Brake Switch Fix
Honda 1990 CBR1000F Owner Manual

Sep 15, 2012 | 1993 Honda CBR 1000 F

1 Answer

How do i remove seat off 1000F?????

there is a lock at the back of tour left hand side at back of bike ,put key in turn anti clockwise and pull seat up .

Jan 27, 2012 | 1989 Honda CBR 1000 F

2 Answers

Can you tell me where the fuel filter is located on my 1991 cbr 1000 honda thank you

The fuel filter on a 1991 CBR 1000F is mounted to the petcock assembly (the part that the fuel lines are connected to). If you removes the petcock assembly it is the piece sticking up like a tower but is part of the petcock assembly. You can however use a very fine children's toothbrush and carb cleaner to clear it out a bit.

Apr 16, 2011 | 1991 Honda CBR 1000 F

1 Answer honda cbr 1000F is over charging.the batterie is throwing out acid.also when I watch the lights of the motorcycle while engine is turing..its not blinks...anybody know what is the...

Yes this will cause engine problems. check with a new battery and a multi meter across the battery terminals, it should read around 13.5v and be a stable reading, much higher or fluctuating wildly, the regulator is bad

Aug 08, 2010 | 1993 Honda CBR 1000 F

1 Answer

I need a tail lite for my 1991 honda cbr 1000f please help discontinued from dealers

Oh that was a tough one. I've found one for you -

Vote for me please :)

Jun 24, 2010 | 1991 Honda CBR 1000 F

1 Answer

Please I ned to purchase a cluth for CBR-1000F

Here's a web site that deals in original equipment Honda parts:

Once you are there, select the year and model of Honda that you need parts for from the drop down boxes. What I like the most about this place is that their site shows you the same exploded-view parts diagrams, with part numbers, that Honda dealers across the country use.

Nov 15, 2009 | 1997 Honda CBR 1000 F

1 Answer

I have a CBR 1000F 1993 it charges fine when

I had the same thing happen to my CBR1100XX..

Could be both the stator/alternator or the regulator/rectifier. I'd try replacing the cheapest unit (regulator/rectifier) first. Check if the insulation on the wires going to the regulator/rectifier look burned.

FYI most Hondas are prone to charging problems.

Sep 02, 2009 | 1993 Honda CBR 1000 F

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers


Level 3 Expert

76846 Answers


Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides