Question about 1994 Yamaha XV 535 Virago DX

1 Answer

Brake light comes on

Honda Prelude S 1992 Manual Transmission.

Brake Light turns on after I press a brake pedal and stays on.

Posted by on

  • yadayada
    yadayada Jul 06, 2010

    at the brake pedal is a brake light switch, have u checked to see if it is sticking or out of adjustment?

  • Kastsiushkin Jul 06, 2010

    I checked that and even bought a new one. The light still comes on.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 632 Answers

Check the brake lever if the Brake light button in the lever is broken or dirty If so clean or replace
But check the brake cable and you will find a box which lights up brake light when pressing brake pedal, you will find an adjuster near it Turn it as cable may have snagged, Un-tighten till light turns off, Then Try brake again Will have solved the problem.

Posted on Jul 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to repair brake light switch in 1992 Honda accord


The fuse to check is 20A fuse #42 (brakes & horn) under the hood. Use a test light or multimeter to measure voltage to body ground at both test tabs at the top of the fuse.OR YOU CAN REPLACE THE SWITCH WHICH IS ABOVE THE BRAKE PEDAL,AUTOZONE,20 BUCKS,OR CHECK THAT TAILLIGHTS ARE GROUNDED AND NO CORROSION.

May 29, 2014 | 1992 Honda Accord

1 Answer

Brake light rear - can't get both brake lights to come on when brakes are pressed....only one side comes on.


-The white light or back up light Not suppose to be on when the
brake is apply.
-Did some one do any wiring...? If so. brake line is connect to the back up light or line by mistake. Check it out and disconnect it.
-(The back up light is ONLY from the transmission safety switch)
-(The brake light is Only from the brake switch)

Good luck

Mai

Mar 25, 2014 | 1992 Honda Accord

1 Answer

Brake dash light stays


Look under dash at the top of your brake pedal. See the button switch, that the pedal pushes in. Push in and out by hand a few times. Put a dab of oil on your finger, put on button, and push in a few times by hand

Mar 23, 2014 | 1992 Honda Prelude

3 Answers

My brake lights stay on when i drive and when i press on the brake it does not come off


Brake light switch, located by the brake pedal, has gone bad. Replace it.

Nov 08, 2012 | 1992 Honda Accord

1 Answer

Brake lights will not turn on when brakes are engaged


I would check -- 1. the fuse
2. the brake pedal brake light switch
3. the light bulbs themselves
4. could also be a bad ground to the lights

c...

Jan 02, 2011 | 1992 Honda Prelude

2 Answers

I have a 1992 Honda Accord. There is no power on the brake light in the rear window. In order for this to be inspected, I think this has to work. Let me know. Thanks


1992 honda accord ex 4door the brakelamp indicator light on the dash is always on and my rear brake lights stay on even when the car is turned off

Sep 27, 2010 | 1992 Honda Accord

6 Answers

My tail lights stay on when I turn car off and put in park which is killing my battery, also my brake lights do not come on when i press brake pedal I checked fuses and they are good. I bought a stop light...


It sounds like your brake pedal switch is not working right. Are the lights on all the time, or just when you turn ignition off? If the former, it is bad brake switch. If the latter, you likely have a bad ground located somewhere in the wiring harness.

Most vehicles have the switch located on a small plate next to the brake pedal arm. Follow the pedal up the arm and to the firewall. Along the way you should see a plunger style switch that looks like the one that you bought. It might also be found inside or next to the brake booster under the hood.

Aug 25, 2009 | 1992 Honda Civic

3 Answers

Car brake lights won t turn off when car is shut down 1996 Honda Odyssey


It should be your brake light switch. There is a little plate welded to the arm of the pedal that has a hole with a rubber stopper. The rubber stopper is most likely missing, or damaged. You should be able to take a flashlight and see the plate and the switch. If the hole is plugged up, you will need the brake light switch, if not, replace the plug.

Jun 02, 2009 | 1992 Honda Accord

1 Answer

Tail lghts/brake lights


Isn't that mysterious? It took me a few weeks to figure it out. Look carefully under the break pedal. There is this device called a "break light switch". I hope that helps.

Feb 03, 2009 | 1992 Honda Accord

3 Answers

Brake lights


Sounds like you need a new brake light switch. It is mounted to the brake pedal assembly.

Oct 26, 2008 | 1987 Honda Prelude

Not finding what you are looking for?
1994 Yamaha XV 535 Virago DX Logo

243 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...